(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（Page7）

559 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P

NS TOOL

Supports heat-resistant alloys such as stainless steel, titanium, etc. The blade length is 3x the blade diameter and the torsion angle is 35°

Standard Price:	283,291 IDR-
Days to Ship:	8 Day(s) or more

MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel

NS TOOL

Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection

Standard Price:	1,149,653 IDR-
Days to Ship:	8 Day(s) or more

MUGEN-COATING 4-Flute End Mill MSE445

NS TOOL

Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Standard Price:	591,859 IDR-
Days to Ship:	8 Day(s) or more

MUGEN-COATING 2-Flute End Mill MSE245

NS TOOL

Adopts a unique Infinity coating for 2-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Standard Price:	591,859 IDR-
Days to Ship:	8 Day(s) or more

Ultra-Fine Machining End Mill Micro Edge NSME230

NS TOOL

Carbide precision specification, blade diameter tolerance ±2 μm, shank tolerance h3 (roundness 0.1 μm)

Standard Price:	1,352,173 IDR-
Days to Ship:	8 Day(s) or more

Carbide Graphite Solid End Mill 2-Flute, Standard Type

EIKOSHA

Carbide graphite solid end mill suitable for graphite electrode machining, 2-flute standard type.
[Features]
·Wear-resistant material is used.

Standard Price:	1,408,000 IDR-
Days to Ship:	8 Day(s) or more

Carbide Graphite Solid End Mill 4-Flute, Standard Type

EIKOSHA

Right Blade Right Helix Angle 30°, Number of Blades: 4 pcs., KO3, standard type "helix angle" standard twist (30 to 44°)

Standard Price:	1,546,667 IDR-
Days to Ship:	8 Day(s) or more

Carbide Graphite Solid End Mill 4-Flute, Long Type

EIKOSHA

GEL4, right blade helix angle 30°, number of flutes: 4, KO3, long type "helix angle" standard helix (30 to 44°), "processing application (processing shape)": plane/side surface/groove/counterbore, "tool material": carbide

Standard Price:	3,018,667 IDR-
Days to Ship:	8 Day(s) or more

Carbide Air Hole End Mill 2-Flute, Standard Type

EIKOSHA

Graphite Electrode Milling, with Air Wheel

Standard Price:	938,667 IDR-
Days to Ship:	8 Day(s) or more

Carbide Air Hole End Mill 4-Flute, Standard Type

EIKOSHA

Graphite Electrode Milling, with Air Wheel

Standard Price:	1,034,667 IDR-
Days to Ship:	8 Day(s) or more

Epoch SUS Wave Long, Flute Length EPSWL4□□□-PN [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Supports diverse applications, from the wet machining of mild steel to the high-speed dry machining of high-hardness materials.

Standard Price:	3,832,308 IDR-
Days to Ship:	8 Day(s) or more

Epoch SUS Wave 3Dc EPSWL4□□□-PN

MITSUBISHI HITACHI TOOL

Possible to perform stable machining of stainless steel low rigidity machine and in weak clamping environment.

Standard Price:	1,818,462 IDR-
Days to Ship:	8 Day(s) or more

Epoch SUS Wave 5Dc EPSW□□□□-□□□-PN

MITSUBISHI HITACHI TOOL

Possible to perform stable machining of stainless steel low rigidity machine and in weak clamping environment.

Standard Price:	2,293,846 IDR-
Days to Ship:	8 Day(s) or more

Epoch SUS Multi, Long Flute Length EPSML4□□□-PN [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Increases fracture-resistance during high-speed and high-efficiency work. GSX coating provides even better heat and abrasion-resistance.

Standard Price:	2,832,308 IDR-
Days to Ship:	8 Day(s) or more

Epoch SUS Multi Under Head 3Dc EPSM4□□□-□□.□-PN

MITSUBISHI HITACHI TOOL

Compatible with from rough processing to finishing processing of stainless steel, carbon steel, alloy steel, etc.

Standard Price:	1,275,077 IDR-
Days to Ship:	8 Day(s) or more

Epoch TH Power Mill, Short Flute Length EPPS4□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

High-speed and high-efficiency rough-machining is possible on materials from steel to stainless steel.

Standard Price:	1,889,231 IDR-
Days to Ship:	Quote

Epoch Panacea Square 2-Flute HGOS2□□□-PN [Alterations Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Supports a wide range of machining from mild steel to hardened materials. Suitable for side machining.

Standard Price:	1,142,770 IDR-
Days to Ship:	Quote

HGGCNV2T HG Coated Carbide NewVictory 2-Flute Blade

SANKO MFG

Machining is possible with a wide range of materials, from raw materials to hardened steel.

[Features]
· A general-purpose 2-flute type with pin angle specification.
· Excellent chip discharge.

Standard Price:	268,524 IDR-
Days to Ship:	10 Day(s) or more

SAGC2T SA Coating Carbide 2-Flute Short Flute

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· A general-purpose 2-flute type with pin angle specification.

Standard Price:	533,679 IDR-
Days to Ship:	8 Day(s) or more

GC2T 2-Flute Carbide Short Blade

SANKO MFG

[Features]
· Compared with other manufacturers' short blades, the blade length is set slightly longer.

Standard Price:	597,060 IDR-
Days to Ship:	11 Day(s) or more

GC4T 4-Flute Carbide Short Blade

SANKO MFG

Compared with other manufacturers' short blades, the blade length is set slightly longer.

Standard Price:	834,627 IDR-
Days to Ship:	11 Day(s) or more

DLGCAL2T DL-Coating 2-Flute Carbide for Aluminum

SANKO MFG

DLC coating provides excellent abrasion resistance and surface lubricity, preventing weld adhesion. Ideal for machining aluminum.

Standard Price:	713,792 IDR-
Days to Ship:	10 Day(s) or more

GCAL2T 2-Flute Carbide for Aluminum Use

SANKO MFG

As high torsion reduces the cutting resistance and the chip pocket is wide, it is ideal for processing aluminum.

Standard Price:	551,006 IDR-
Days to Ship:	10 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

OSG

End mill dedicated for counterboring. Can be used for counterboring processing of hex bolts as well as a tool for pre-drilling processing on angled surface.

Standard Price:	949,364 IDR-
Days to Ship:	8 Day(s) or more

Router for CFRP Cross-flute Router_DIA-DCR

OSG

Diamond coated mesh router. Bottom edge is of end mill specification.

Standard Price:	1,971,000 IDR-
Days to Ship:	8 Day(s) or more

Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from "standard / alteration category" of the narrowing conditions.

Carbide square end mill for high-speed processing of high-hardness materials.
[Features]
· Coating with a super-aluminum rich Ai-Ti-Cr-based laminate.
· "GS hard coat" improves oxidation-resistance at 1,100°C more than 3 times that of conventional products

Standard Price:	1,859,693 IDR-
Days to Ship:	12 Day(s) or more

Epoch TH, Hard Short Flute Length CEPS□□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Carbide square end mills that can be used for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· Supports both wet and dry machining of aluminum alloys.
· DLC coating and has an excellent shape for discharging cutting chips

Standard Price:	1,983,077 IDR-
Days to Ship:	Quote

Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Enables high-precision machining even for deep cutting.

Standard Price:	6,636,923 IDR-
Days to Ship:	Quote

Epoch, Power Mill Medium Flute Length EPPM4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

The use of unequal divisions and unequal leads and the tip shape with good sharpness suppresses chatter and is suitable for heat-resistant alloys.

Standard Price:	2,158,462 IDR-
Days to Ship:	12 Day(s) or more

Epoch Power Mill Long Shank EPPLS4□□□

MITSUBISHI HITACHI TOOL

It enables high efficiency. The power mill shape has achieved outstanding chip removal capability.

Standard Price:	2,176,923 IDR-
Days to Ship:	12 Day(s) or more

Epoch TH Power Mill Long Blade Length EPPL4□□□-TH

MITSUBISHI HITACHI TOOL

For machining high-hardness materials. The outstanding chip discharge performance enables high-efficiency

Standard Price:	4,304,615 IDR-
Days to Ship:	Quote

Epoch TH Power Mill, Medium Flute Length EPPM4□□□TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Carbide square end mill with excellent bending strength and thermal shock-resistance.
[Features]
· Improves reliability in wet processing with raw materials to support a wide range of raw materials to hardened materials.
· High abrasion-resistance and heat-resistance

Standard Price:	2,372,308 IDR-
Days to Ship:	Quote

GSX MILL 2-Flute End Mill GSX20000C-3D

SUMITOMO ELECTRIC HARDMETAL

The reliability in wet processing has been improved by adopting an ultra-fine particle carbide base metal with high transverse rupture strength and thermal shock resistance. Lifespan and reliability have been improved by adopting a GSX coating with increased wear and heat resistance.

Standard Price:	458,219 IDR
Days to Ship:	8 Day(s) or more

GSX MILL 2-Flute End Mill Sharp Corner GSX20000S-2D

SUMITOMO ELECTRIC HARDMETAL

Standard Price:	458,219 IDR
Days to Ship:	8 Day(s) or more

GSX MILL 2-Flute End Mill Sharp Corner GSX20000S-3D

SUMITOMO ELECTRIC HARDMETAL

Standard Price:	426,756 IDR
Days to Ship:	8 Day(s) or more

GSX MILL 4-Flute End Mill GSX40000C-2D

SUMITOMO ELECTRIC HARDMETAL

Standard Price:	1,385,688 IDR
Days to Ship:	8 Day(s) or more

GSX MILL 4-Flute End Mill GSX40000C-4D

SUMITOMO ELECTRIC HARDMETAL

Standard Price:	2,114,121 IDR
Days to Ship:	8 Day(s) or more

GSX MILL 4-Flute End Mill Sharp Corner GSX40000S-2D

SUMITOMO ELECTRIC HARDMETAL

Standard Price:	431,766 IDR-
Days to Ship:	8 Day(s) or more

GSX MILL 4-Flute End Mill Anti-Vibration Type GSXVL4000-2.5D

SUMITOMO ELECTRIC HARDMETAL

Optimization of the variable split and unequal lead vastly improves the chatter resistance and damage resistance properties, and realizes high-speed and high-feed processing through reduced cutting resistance.

Standard Price:	1,472,091 IDR
Days to Ship:	8 Day(s) or more

Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Standard Price:	648,364 IDR
Days to Ship:	8 Day(s) or more

Solid Spiral End Mill SSM4000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Machining Application (Processing Shape) Side/Groove
Tool material: Carbide
Work Material 1/Cast Iron/Aluminum
Coating: Uncoated
Standard/alteration category, manufacturer's standard product, Number of flutes (pcs.): 4
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Standard Price:	894,594 IDR
Days to Ship:	8 Day(s) or more

Miniature Long Blade Square End Mill, 2 Blades

ATOM

Abundant blade length variation that allows the optimal blade length to be selected. Ideal for resin modeling and non-ferrous component machining.

Standard Price:	1,210,649 IDR-
Days to Ship:	8 Day(s) or more

Long Blade Square End Mill 2 Blades

ATOM

Abundant blade length variation that allows the optimal blade length to be selected. Ideal for resin modeling and non-ferrous component machining.

Standard Price:	943,385 IDR-
Days to Ship:	8 Day(s) or more

Small Diameter Square End Mill, 2-Flute

ATOM

Ideal for precise machining of precision molds and precision parts. New φ0.05 to φ0.09 sizes have been added to the standard product inventory.

Standard Price:	835,519 IDR-
Days to Ship:	8 Day(s) or more

Standard Square End Mill, 2-Flute

ATOM

[Features]
· Supports a wide range of applications, from general steel to nonferrous metals and resins.

Standard Price:	728,706 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	EIKOSHA	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OSG	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ATOM	ATOM	ATOM	ATOM
Product Series	MUGEN-COATING PREMIUM 2-Flute Sharp Edge LEAD 35 End Mill MXH235P	MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel	MUGEN-COATING 4-Flute End Mill MSE445	MUGEN-COATING 2-Flute End Mill MSE245	Ultra-Fine Machining End Mill Micro Edge NSME230	Carbide Graphite Solid End Mill 2-Flute, Standard Type	Carbide Graphite Solid End Mill 4-Flute, Standard Type	Carbide Graphite Solid End Mill 4-Flute, Long Type	Carbide Air Hole End Mill 2-Flute, Standard Type	Carbide Air Hole End Mill 4-Flute, Standard Type	Epoch SUS Wave Long, Flute Length EPSWL4□□□-PN [Alteration Supported Product]	Epoch SUS Wave 3Dc EPSWL4□□□-PN	Epoch SUS Wave 5Dc EPSW□□□□-□□□-PN	Epoch SUS Multi, Long Flute Length EPSML4□□□-PN [Alteration Supported Product]	Epoch SUS Multi Under Head 3Dc EPSM4□□□-□□.□-PN	Epoch TH Power Mill, Short Flute Length EPPS4□□□-TH [Alteration Supported Product]	Epoch Panacea Square 2-Flute HGOS2□□□-PN [Alterations Supported Product]	HGGCNV2T HG Coated Carbide NewVictory 2-Flute Blade	SAGC2T SA Coating Carbide 2-Flute Short Flute	GC2T 2-Flute Carbide Short Blade	GC4T 4-Flute Carbide Short Blade	DLGCAL2T DL-Coating 2-Flute Carbide for Aluminum	GCAL2T 2-Flute Carbide for Aluminum Use	ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS	Router for CFRP Cross-flute Router_DIA-DCR	Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product]	Epoch TH, Hard Short Flute Length CEPS□□□□-TH [Alteration Supported Product]	Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]	Epoch, Power Mill Medium Flute Length EPPM4□□□ [Alteration Supported Product]	Epoch Power Mill Long Shank EPPLS4□□□	Epoch TH Power Mill Long Blade Length EPPL4□□□-TH	Epoch TH Power Mill, Medium Flute Length EPPM4□□□TH [Alteration Supported Product]	GSX MILL 2-Flute End Mill GSX20000C-3D	GSX MILL 2-Flute End Mill Sharp Corner GSX20000S-2D	GSX MILL 2-Flute End Mill Sharp Corner GSX20000S-3D	GSX MILL 4-Flute End Mill GSX40000C-2D	GSX MILL 4-Flute End Mill GSX40000C-4D	GSX MILL 4-Flute End Mill Sharp Corner GSX40000S-2D	GSX MILL 4-Flute End Mill Anti-Vibration Type GSXVL4000-2.5D	Solid Spiral End Mill SSM2000 Type	Solid Spiral End Mill SSM4000 Type	Miniature Long Blade Square End Mill, 2 Blades	Long Blade Square End Mill 2 Blades	Small Diameter Square End Mill, 2-Flute	Standard Square End Mill, 2-Flute
CAD
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Quote	Quote	10 Day(s) or more	8 Day(s) or more	11 Day(s) or more	11 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	Quote	Quote	12 Day(s) or more	12 Day(s) or more	Quote	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Blade diameter (D)(φ)	0.1 ～ 6	5 ～ 12	2 ～ 12	2 ～ 12	0.03 ～ 0.09	0.5 ～ 25	3 ～ 25	3 ～ 25	4 ～ 25	4 ～ 25	6 ～ 20	4 ～ 20	5 ～ 20	6 ～ 20	1 ～ 20	3 ～ 20	0.2 ～ 20	1 ～ 12	0.5 ～ 20	1 ～ 20	2 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	3.175 ～ 6.35	1 ～ 32	1 ～ 6	10 ～ 20	3 ～ 20	3 ～ 17	6 ～ 20	3 ～ 20	3	3	0.5	7	12	3 ～ 8	8	2	3	0.1 ～ 0.9	1 ～ 3	0.05 ～ 0.95	1 ～ 12
Blade length (ℓ)(mm)	0.3 ～ 18	10 ～ 30	5 ～ 30	5 ～ 30	0.045 ～ 0.135	5 ～ 60	20 ～ 60	30 ～ 80	20 ～ 60	20 ～ 60	30 ～ 100	6 ～ 30	7.5 ～ 30	30 ～ 100	1.5 ～ 30	4.5 ～ 30	0.4 ～ 40	3 ～ 24	1 ～ 45	2 ～ 45	5 ～ 45	3 ～ 38	3 ～ 38	8 ～ 38	10 ～ 19	3.5 ～ 70	2 ～ 12	45 ～ 75	15 ～ 55	4.5 ～ 24	25 ～ 75	15 ～ 55	9	7.5	1.5	14	48	7.5 ～ 19	20	6	8	0.7 ～ 10	5 ～ 30	0.1 ～ 2.5	3 ～ 25
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	12 ～ 60	25 ～ 100	-	3 ～ 60	-	0.6 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	10.5 ～ 17.5	-	-	10.5	-	1.9	16	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 6	6 ～ 12	4 ～ 12	4 ～ 12	4	4 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 20	4 ～ 12	3 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	6 ～ 20	3.175 ～ 6.35	6 ～ 32	6	10 ～ 20	6 ～ 20	5 ～ 16	6 ～ 20	6 ～ 20	6	3	4	8	12	3 ～ 8	8	4	6	3	4	3	4 ～ 12
Number of flutes(sheet)	2	6	4	2	2	2	4	4	2	4	4	3 ～ 4	3 ～ 4	4	4	4	2	2	2	2	4	2	2	2	-	4 ～ 8	4 ～ 6	4	4	4	4	4	2	2	2	4	4	4	4	2	4	2	2	2	2
Overall Length (L)(mm)	45 ～ 60	60 ～ 80	45 ～ 80	45 ～ 80	45	50 ～ 160	90 ～ 160	120 ～ 250	60 ～ 160	60 ～ 160	70 ～ 155	56 ～ 125	68 ～ 155	70 ～ 155	56 ～ 125	60 ～ 125	40 ～ 125	45 ～ 75	50 ～ 115	50 ～ 115	50 ～ 115	40 ～ 100	40 ～ 100	50 ～ 125	38.1 ～ 63.5	60 ～ 175	60	100 ～ 155	60 ～ 125	80 ～ 180	70 ～ 155	60 ～ 125	50	38	40	60	100	38 ～ 60	80	40	45	40	40 ～ 70	40	40 ～ 75
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[◎] / Titanium[○] / Copper[◎]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-	-	-
Machining Application	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Side	Plane / Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Countersinking	Side	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Countersinking	Plane / Side / Inclined Cuts	Side	Side	Side	Side	Side	Side	Side	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Side	Side / Groove	Side / Groove	Groove	Side	Plane / Side	Plane / Side	Plane / Side	Plane / Side
Coating	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	Non-Coated	-	-	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	-	-	DLC	-	TiAlN	Dia Coat	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade tip shape	Sharp Edge	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	Square	Square	Square	High Helical	High Helical	Square	Roughing	High Helical	High Helical	Square	Square	High Helical	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 100
- 103
- 110
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
Details

Clear

Torsion Angle (θ)
Drawing

Clear

Machining Application
Images

Clear

Coating
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Type
Clear

Narrow search by specifying Manufacturer

- MISUMI (74)
- Economy series (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（Page7）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（Page7）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB