(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（work material：Copper Page3）

272 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

MISUMI

Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	153,811 IDR-
Days to Ship:	8 Day(s) or more

Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	245,085 IDR-
Days to Ship:	8 Day(s) or more

Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	441,153 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Uneven Lead 4-Flute Square End Mill

MISUMI

The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)

Volume Discount

Standard Price:	484,793 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	382,118 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

MISUMI

Volume Discount

Standard Price:	412,427 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General purpose blade length regular type 2-flute
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	191,838 IDR-
Days to Ship:	8 Day(s) or more

DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC

NACHI(FUJIKOSHI)

End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.

Standard Price:	759,628 IDR-
Days to Ship:	8 Day(s) or more

Carbide Mini Square End Mill with 2 Flutes 2MNE

NACHI(FUJIKOSHI)

Carbide solid type small diameter end mill. Suitable for grooving precision molds and precision components.

Standard Price:	520,807 IDR-
Days to Ship:	8 Day(s) or more

Carbide Mini Square End Mill with 4 Flutes 4MNE

NACHI(FUJIKOSHI)

Carbide solid type small diameter end mill. Suitable for side-wall machining precision molds and precision components.

Standard Price:	650,176 IDR-
Days to Ship:	8 Day(s) or more

DLC Mill for Aluminum 2DLCM

NACHI(FUJIKOSHI)

[Features]
· End mill for aluminum and copper alloys.
· Dry machining of aluminum is possible.

Standard Price:	493,619 IDR-
Days to Ship:	8 Day(s) or more

Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

General purpose carbide end mill. Suitable for grooving.

Standard Price:	344,957 IDR-
Days to Ship:	8 Day(s) or more

DLC Mill, Sharp Corner, 2-Flute 2DLCSC

NACHI(FUJIKOSHI)

End mill for aluminum and copper alloys. Adopts sharp corners.

Standard Price:	493,619 IDR-
Days to Ship:	8 Day(s) or more

DLC Mill Slot Long Shank DLCSLTLS

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.

Standard Price:	599,991 IDR-
Days to Ship:	8 Day(s) or more

For Anchor V Aluminum 2CEAL

NACHI(FUJIKOSHI)

Carbide end mill for aluminum.

Standard Price:	378,578 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Standard Price:	172,154 IDR-
Days to Ship:	2 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

Standard Price:	172,154 IDR-
	Special Price
Days to Ship:	Same day or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

Standard Price:	292,154 IDR-
	Special Price
Days to Ship:	Same day or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

OSG

General purpose type 2-flute ultra-long blade end mill with FX coating for excellent heat resistance.

Standard Price:	1,161,000 IDR
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL

OSG

Non-coated, 2-flute, and extra-long.

Standard Price:	1,077,658 IDR-
Days to Ship:	8 Day(s) or more

2-Flute Keyway (OH1) MG-EKD [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

for keyway (OH1)

Standard Price:	1,395,385 IDR
Days to Ship:	Quote

DIA Coated 2 Flutes Short_DIA-EDS

OSG

End mill with ultra-microcrystalline diamond coating. The high silicon aluminum alloy material and graphite treatment provides outstanding tool life.

Standard Price:	2,243,800 IDR-
Days to Ship:	8 Day(s) or more

Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS

OSG

End mill featuring an original ultra-smooth new DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.

Standard Price:	779,265 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6

OSG

End mill for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

Standard Price:	956,603 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS

OSG

General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.

Standard Price:	1,074,474 IDR-
Days to Ship:	8 Day(s) or more

2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Standard Price:	608,944 IDR-
Days to Ship:	8 Day(s) or more

ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_WX-EDS

OSG

A general-purpose 2-flute end mill which uses a high-toughness carbide alloy as its base material for excellent stability. Can be used for a wide range of work materials and enables highly reliable processing.

Standard Price:	1,107,077 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub_FX-MG-EDSS

OSG

Blade length is 1.5 times the blade diameter, an ultra-short blade that is ideal for high speed machining with high speed machining centers.

Standard Price:	1,044,932 IDR-
Days to Ship:	8 Day(s) or more

ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS

OSG

Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

Standard Price:	728,832 IDR
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS

OSG

Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

Standard Price:	1,306,595 IDR
Days to Ship:	2 Day(s)

Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Standard Price:	917,954 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long_FX-MG-EDL

OSG

General purpose type 2-flute long blade end mill with FX coating for excellent heat resistance.

Standard Price:	1,611,000 IDR-
Days to Ship:	1 Day(s) or more

Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

[Specifications]
·Blade diameters of 6 to 12 mm are sharp, and 13 to 25 mm are sharp.

Standard Price:	4,732,141 IDR-
Days to Ship:	8 Day(s) or more

Carbide End Mills CrN coated 2 Flutes Miniature Short for Copper, Alminum Alloys and Plastic_CRN-EDS-3

OSG

The amount of tool protrusion can be set to the minimum in the two-surface clamped HSK holder. Ideal for high-speed mass production of copper electrodes.

Standard Price:	1,270,091 IDR-
Days to Ship:	8 Day(s) or more

Carbide End Mills CrN coated 2 Flutes Miniature Long for Copper, Alminum Alloys and Plastic_CRN-EDL-4

OSG

The highly lubricating CrN coating exhibits excellent performance when machining copper alloy, aluminum alloy, and plastic. Ideal for fine processing of copper electrodes and IT parts made of copper alloy.

Standard Price:	851,727 IDR-
Days to Ship:	8 Day(s) or more

Regular Grain Carbide End Mills 3 Flutes Multi-Purpose for Copper and Aluminum Alloys_CA-MFE

OSG

The highly lubricating CrN coating exhibits excellent performance when machining copper alloy, aluminum alloy, and plastic. Provides a glossy and beautiful finished surface when used for copper electrode processing.

Standard Price:	1,113,461 IDR-
Days to Ship:	8 Day(s) or more

Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

OSG

For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.

Standard Price:	966,175 IDR-
Days to Ship:	1 Day(s) or more

Carbide End Mills DLC Coated 3 Flutes Short_DLC-ETS

OSG

Original ultra-smooth new DLC coating prevents adhesion. Capable of high-speed and high-efficiency machining of aircraft aluminum parts, etc.

Standard Price:	1,048,239 IDR-
Days to Ship:	8 Day(s) or more

Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS

OSG

With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.

Standard Price:	680,391 IDR-
Days to Ship:	8 Day(s) or more

Regular Grain Carbide End Mills CrN coated 4 Flutes Short for Copper, Aluminum Alloys and Plastic_CRN-EMS

OSG

Can be used for a variety of cutter paths from high-precision, high-efficiency machining of the standing wall to helical machining, contouring machining and ramping machining. The amount of protrusion can be freely adjusted thanks to the fine-handle shank design.

Standard Price:	2,295,385 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML

OSG

General purpose type 4-flute ultra-long blade end mill with FX coating for excellent heat resistance.

Standard Price:	2,983,231 IDR
Days to Ship:	2 Day(s)

Micro Grain Carbide End Mills 4 Flutes Extra long_MG-EXML

OSG

Non-coated, 4-flute, and extra-long.

Standard Price:	2,501,245 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS

OSG

General purpose type 4-flute end mill with FX coating for excellent heat resistance. Can be used for both high-speed and high-feed processing.

Standard Price:	1,503,326 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

[Specifications]
·Blade diameters of 2 to 9.5 mm are sharp, and 10 to 25 mm are sharp.

Standard Price:	3,701,164 IDR-
Days to Ship:	8 Day(s) or more

ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_WX-EMS

OSG

General-purpose 4-flute end mill in which high toughness carbide is used as the base material. Can be used for a wide range of work materials and enables highly reliable processing.

Standard Price:	443,048 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

																	On Sale Till 31/03/2025	On Sale Till 31/03/2025
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type	Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type	Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model	TSC Series Carbide Uneven Lead 4-Flute Square End Mill	VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 2-Flute Square End Mill	DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC	Carbide Mini Square End Mill with 2 Flutes 2MNE	Carbide Mini Square End Mill with 4 Flutes 4MNE	DLC Mill for Aluminum 2DLCM	Anchor V 2-Flute 2CE	DLC Mill, Sharp Corner, 2-Flute 2DLCSC	DLC Mill Slot Long Shank DLCSLTLS	For Anchor V Aluminum 2CEAL	Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL	Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL	2-Flute Keyway (OH1) MG-EKD [Alterations Available]	DIA Coated 2 Flutes Short_DIA-EDS	Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS	2-flute short type MG-EDS [Alterations Available]	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_WX-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub_FX-MG-EDSS	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS	Micro Grain Carbide End Mills 2 Flutes Medium_MG-EDN	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long_FX-MG-EDL	Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL	Carbide End Mills CrN coated 2 Flutes Miniature Short for Copper, Alminum Alloys and Plastic_CRN-EDS-3	Carbide End Mills CrN coated 2 Flutes Miniature Long for Copper, Alminum Alloys and Plastic_CRN-EDL-4	Regular Grain Carbide End Mills 3 Flutes Multi-Purpose for Copper and Aluminum Alloys_CA-MFE	Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS	Carbide End Mills DLC Coated 3 Flutes Short_DLC-ETS	Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS	Regular Grain Carbide End Mills CrN coated 4 Flutes Short for Copper, Aluminum Alloys and Plastic_CRN-EMS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Extra Long_FX-MG-EXML	Micro Grain Carbide End Mills 4 Flutes Extra long_MG-EXML	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS	Micro Grain Carbide End Mills 4 Flutes Short_MG-EMS	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_WX-EMS
Days to Ship	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	Same day or more	Same day or more	8 Day(s) or more	8 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s)	8 Day(s) or more	1 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	1 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes
Blade diameter (D)(φ)	0.5 ～ 20	0.5 ～ 20	3 ～ 12	2 ～ 25	1 ～ 20	1.5 ～ 25	0.3 ～ 20	3 ～ 20	0.1 ～ 2	1 ～ 2	1 ～ 20	1 ～ 20	1 ～ 20	2 ～ 20	2 ～ 20	0.1 ～ 12	0.1 ～ 20	0.2 ～ 12	3	3 ～ 5	6	0.5 ～ 12	0.5 ～ 12	0.2 ～ 2.5	0.2 ～ 30	1.4 ～ 25	9 ～ 12	3 ～ 16	5.5	6	3.5 ～ 5	3 ～ 29	13 ～ 25	1 ～ 12	0.5 ～ 3	1 ～ 3	1 ～ 20	5 ～ 12	3 ～ 8	8 ～ 22	6	5 ～ 8	2 ～ 30	13 ～ 25	2 ～ 5
Blade length (ℓ)(mm)	1 ～ 40	1.5 ～ 60	15 ～ 60	4 ～ 50	4 ～ 80	6 ～ 120	0.6 ～ 45	12 ～ 56	0.2 ～ 6	3 ～ 6	3 ～ 38	3 ～ 38	3 ～ 38	3 ～ 30	6 ～ 38	0.15 ～ 18	0.3 ～ 60	0.8 ～ 48	20	20 ～ 40	8	1 ～ 26	1 ～ 24	0.3 ～ 3.7	0.4 ～ 45	4 ～ 45	19 ～ 26	4.5 ～ 24	8.3	15	12 ～ 17	12 ～ 67	40 ～ 67	1.5 ～ 18	1.5 ～ 8	4 ～ 15	2.5 ～ 38	13 ～ 26	8 ～ 19	12 ～ 33	40	50	6 ～ 45	26 ～ 45	6 ～ 13
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	8 ～ 82	-	-	-	-	-	-	-	-	-	1.5 ～ 5	-	-	-	-	-	-	-	-	-	2.5 ～ 30	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 20	6 ～ 12	6 ～ 25	6 ～ 20	4 ～ 25	4 ～ 20	6 ～ 20	3 ～ 4	4	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	6	6	6	4 ～ 12	4 ～ 12	6	3 ～ 32	4 ～ 25	10 ～ 12	6 ～ 16	6	5	6	6 ～ 32	12 ～ 25	6 ～ 12	3	4	4 ～ 20	6 ～ 12	6 ～ 8	6 ～ 20	6	6 ～ 10	4 ～ 32	12 ～ 25	4 ～ 6
Number of flutes(sheet)	2	2	2	4	2	4	2	2	2	4	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	3	4	4	4	4	4
Overall Length (L)(mm)	40 ～ 110	40 ～ 130	60 ～ 130	50 ～ 120	60 ～ 200	60 ～ 250	40 ～ 100	50 ～ 125	40	40	40 ～ 100	50 ～ 100	40 ～ 100	50 ～ 200	50 ～ 100	45 ～ 75	45 ～ 130	45 ～ 100	60	60 ～ 80	50	40 ～ 75	40 ～ 75	50	40 ～ 125	40 ～ 120	70 ～ 75	50 ～ 100	50	90	50 ～ 60	50 ～ 145	100 ～ 140	50 ～ 80	40	45 ～ 50	40 ～ 105	50 ～ 75	50 ～ 60	110 ～ 200	80	90 ～ 95	40 ～ 125	85 ～ 120	40 ～ 50
work material	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[○]	Copper[◎]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Variable lead	-	-	-	Standard torsion (30-40°)	-	-	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	-	-	-	DLC	-	-	DLC	-	DLC	DLC	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	Non-Coated	Dia Coat	DLC	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	CrN	CrN	CrN	Non-Coated	DLC	Non-Coated	Non-Coated	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN
Blade tip shape	-	-	-	With Lead	-	-	-	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 100
- 103
- 110
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Narrow search by specifying Manufacturer

- MISUMI (73)
- Economy series (0)
- NS TOOL (58)
- OSG (48)
- MITSUBISHI HITACHI TOOL (23)
- ASAHI TOOLS (17)
- 7 LEADERS (12)
- NACHI(FUJIKOSHI) (9)
- EIKOSHA (6)
- SANDVIK (6)
- TOYO DRILL (5)
- OKAZAKI SEIKO (5)
- KYOWA SEIKO (3)
- DIJET (2)
- SANKO MFG (2)
- UNION TOOL (2)
- SUMITOMO ELECTRIC HARDMETAL (1)
- MITSUBISHI MATERIALS (0)
- WIDIN (0)
- PROCHI (0)
- ISCAR (0)
- OMIKOGYO (0)
- VAN HOORN (0)
- Poulten&Graf (0)
- TAIYO-TOOL (0)
- GCT (0)
- GUHRING (0)
- MAPAL (0)
- ATOM (0)
- KYOCERA (0)
- THE CUT (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（work material：Copper Page3）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（work material：Copper Page3）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB