(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（work material：High Hardness Steel-HRC65）

33 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

OSG

High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.

Standard Price:	1,410,306 IDR-
Days to Ship:	8 Day(s) or more

Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from "standard / alteration category" of the narrowing conditions.

Carbide square end mill for high-speed processing of high-hardness materials.
[Features]
· Coating with a super-aluminum rich Ai-Ti-Cr-based laminate.
· "GS hard coat" improves oxidation-resistance at 1,100°C more than 3 times that of conventional products

Standard Price:	1,859,693 IDR-
Days to Ship:	12 Day(s) or more

Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN

MITSUBISHI HITACHI TOOL

[Notice] Improvements of the cutting edge and neck shape suppress sagging and have achieved high-precision machining. The use of PN coating enables even longer lifespan of machining.

Standard Price:	703,385 IDR-
Days to Ship:	Quote

Epoch, Power Mill Short Flute Length EPPS4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Permits high-efficiency machining of hardened material. Suitable for finishing of large side surfaces.

Standard Price:	1,718,462 IDR-
Days to Ship:	Quote

MHDH645 6-Flute Square-End Mill for High-Hardness

NS TOOL

Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy

Standard Price:	1,019,105 IDR-
Days to Ship:	8 Day(s) or more

Epoch TH, Hard Long Flute Length CEPL□□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from "standard/alteration classification" of the narrowing conditions.

Ideal for rough and medium finishing from steel to stainless steel. Cutting-resistance is low, and high efficiency machining is possible even with BT30 machines.

Standard Price:	3,192,308 IDR-
Days to Ship:	Quote

Epoch TH Power Mill (Square) EPPM4□□□TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from "standard/alteration classification" of the narrowing conditions.

Carbide square end mill capable of grooving and side machining with 4 flutes.
[Features]
· The product has a long lifespan even in sharp corners since the product uses ultra-fine-grained cemented carbide with both abrasion-resistance and toughness.

Standard Price:	1,983,077 IDR-
Days to Ship:	8 Day(s) or more

GS MILL Hard GSH

NACHI(FUJIKOSHI)

The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.

Standard Price:	713,841 IDR-
Days to Ship:	8 Day(s) or more

X's Mill Hard Long SLXSMH

NACHI(FUJIKOSHI)

Capable of high-efficient machining of hardened materials. Suitable for wide side finishing.

Standard Price:	1,689,343 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS

OSG

Ultra-heat-resistant, ultra-hard newly developed WX super coated high rigidity ball end mill. High-speed, high-precision machining of hardened steel as well as, of course, high-speed general steel machining.

Standard Price:	601,077 IDR-
Days to Ship:	2 Day(s) or more

MIRA BORON CBN brazed End Mills 1 Flute Short_MBOS

OSG

CBN tip brazed type end mill. Exhibits true performance when machining hardened steel.

Standard Price:	3,414,366 IDR-
Days to Ship:	8 Day(s) or more

WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS

OSG

Long shank end mill with extremely high tool rigidity. Machining is possible with a wide range of materials, from general materials to hardened steel.

Standard Price:	2,019,700 IDR-
Days to Ship:	8 Day(s) or more

SSF120 CBN Super Surface End Mill

NS TOOL

Idea for reference surface protrusion machining during microfabrication. Adopts a unique shape and corner rounding to achieve a stable machined surface

Standard Price:	2,633,149 IDR-
Days to Ship:	8 Day(s) or more

CBN “MICRO EDGE Z”

NS TOOL

Sharp edge achieved by matching NS machining technology with carefully selected CBN material

CAD ：: 2D

Standard Price:	4,057,305 IDR-
Days to Ship:	8 Day(s) or more

MHDH445 4-Flute Square-End Mill for High-Hardness

NS TOOL

Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy

Standard Price:	769,878 IDR-
Days to Ship:	8 Day(s) or more

MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel

NS TOOL

Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection

Standard Price:	769,878 IDR-
Days to Ship:	8 Day(s) or more

Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Features unequal division and irregular lead, which prevents chattering during high-speed high-efficiency processing.

Standard Price:	1,807,692 IDR-
Days to Ship:	Quote

CBN square end mill SSE400

NS TOOL

Enables machining of corner edges of high-hardness materials. Adopts a unique multi-flute shape for improved abrasion resistance

Standard Price:	3,938,626 IDR-
Days to Ship:	8 Day(s) or more

CBN square end mill SSE600

NS TOOL

Enables machining of corner edges of high-hardness materials. Adopts a unique multi-flute shape for improved abrasion resistance

Standard Price:	2,751,830 IDR-
Days to Ship:	8 Day(s) or more

MUGEN-COATING PREMIUM 2-Flute LEAD 30 End Mill MXH230

NS TOOL

Supports heat-resistant alloys such as stainless steel, titanium, etc. Standard type that can be used with versatility for grooves or sides

Standard Price:	283,291 IDR-
Days to Ship:	8 Day(s) or more

MUGEN-COATING PREMIUM 2-Flute LEAD 35 End Mill MXH235

NS TOOL

Supports heat-resistant alloys such as stainless steel, titanium, etc. Resolves the problem of a blade length too short at 2x and too long at 4x

Standard Price:	289,347 IDR-
Days to Ship:	8 Day(s) or more

MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel

NS TOOL

Ideal for finishing in high-hardness regions (48-65 HRC). Achieves precision finishing with little deflection

Standard Price:	1,149,653 IDR-
Days to Ship:	8 Day(s) or more

MUGEN-COATING 4-Flute End Mill MSE445

NS TOOL

Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Standard Price:	591,859 IDR-
Days to Ship:	8 Day(s) or more

Epoch TH Power Mill, Short Flute Length EPPS4□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

High-speed and high-efficiency rough-machining is possible on materials from steel to stainless steel.

Standard Price:	1,889,231 IDR-
Days to Ship:	Quote

Epoch TH, Hard Short Flute Length CEPS□□□□-TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Carbide square end mills that can be used for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· Supports both wet and dry machining of aluminum alloys.
· DLC coating and has an excellent shape for discharging cutting chips

Standard Price:	1,983,077 IDR-
Days to Ship:	Quote

Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Enables high-precision machining even for deep cutting.

Standard Price:	6,636,923 IDR-
Days to Ship:	Quote

Epoch TH Power Mill Long Blade Length EPPL4□□□-TH

MITSUBISHI HITACHI TOOL

For machining high-hardness materials. The outstanding chip discharge performance enables high-efficiency

Standard Price:	4,304,615 IDR-
Days to Ship:	Quote

Epoch TH Power Mill, Medium Flute Length EPPM4□□□TH [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Carbide square end mill with excellent bending strength and thermal shock-resistance.
[Features]
· Improves reliability in wet processing with raw materials to support a wide range of raw materials to hardened materials.
· High abrasion-resistance and heat-resistance

Standard Price:	2,372,308 IDR-
Days to Ship:	Quote

GBE End Mill with Ultra High Pressure Sintered Body

MITSUBISHI MATERIALS

[Features]
Helix angle: Helix angle free For machining (machining shape): Side
Tool Material: CBN

Standard Price:	4,480,000 IDR
Days to Ship:	Quote

End Mill for High Hardness Steel Machining

OMIKOGYO

[Features]
· Equipped with a highly rigid cutter structure as well as a high-torsion groove structure for excellent chip disposal.
· The cutting edge corners are minutely rounded to prevent chipping.
· The OP coating enables optimal use with high hardness steel up to HRC65

Standard Price:	2,074,308 IDR
Days to Ship:	Quote

SPEED/T Multi-Flute, for High Hardness

Poulten&Graf

[Features]
· Can be used with hardened steel up to HRC 65 thanks to its use of highest-grade 200 Nano material as well as a high hardness, highly heat resistant oxidized silicon-based (SI) coating.
· It supports high-speed machining and has a long service life.

Standard Price:	995,479 IDR-
Days to Ship:	10 Day(s) or more

Carbide 4-Flute Variable Split Variable Lead High-Hardness End Mill 38°/41° F636TX

7 LEADERS

[Features]
· High performance 4-flute end mill for machining high hardness materials with UMG carbide substrate.
· Variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· Nanoparticle multilayer coating.
· Suitable for machining high-hardness materials from HRC 40 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.

Standard Price:	623,701 IDR-
Days to Ship:	8 Day(s) or more

GSX MILL VL Hard 2.5D GSXVLH6-2.5D

NACHI(FUJIKOSHI)

[Features]
· Unequal division and unequal lead enable high-speed and high-grade processing.
· For high-hardness materials.

Standard Price:	1,332,475 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	NS TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	MITSUBISHI HITACHI TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI MATERIALS	OMIKOGYO	Poulten&Graf	7 LEADERS	NACHI(FUJIKOSHI)
Product Series	WXS Coated Multiple Flutes Short Super_FXS-CR-EMS	Epoch TH Hard Regular Length CEPR□□□□-TH [Alteration Supported Product]	Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN	Epoch, Power Mill Short Flute Length EPPS4□□□ [Alteration Supported Product]	MHDH645 6-Flute Square-End Mill for High-Hardness	Epoch TH, Hard Long Flute Length CEPL□□□□-TH [Alteration Supported Product]	Epoch TH Power Mill (Square) EPPM4□□□TH [Alteration Supported Product]	GS MILL Hard GSH	X's Mill Hard Long SLXSMH	Micro Grain Carbide End Mills WX Super Coated 4 Flutes Short_WXS-EMS	MIRA BORON CBN brazed End Mills 1 Flute Short_MBOS	WXS Coated Multiple Flutes Long shank Short Super_FXS-LS-EMS	SSF120 CBN Super Surface End Mill	CBN “MICRO EDGE Z”	MHDH445 4-Flute Square-End Mill for High-Hardness	MHD445 MUGEN-COATING 4-Flute End Mill for Hardened Steel	Epoch, Power Mill Regular Flute Length EPP4□□□ [Alteration Supported Product]	CBN square end mill SSE400	CBN square end mill SSE600	MUGEN-COATING PREMIUM 2-Flute LEAD 30 End Mill MXH230	MUGEN-COATING PREMIUM 2-Flute LEAD 35 End Mill MXH235	MHD645 MUGEN-COATING 6-Flute End Mill for Hardened Steel	MUGEN-COATING 4-Flute End Mill MSE445	Epoch TH Power Mill, Short Flute Length EPPS4□□□-TH [Alteration Supported Product]	Epoch TH, Hard Short Flute Length CEPS□□□□-TH [Alteration Supported Product]	Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]	Epoch TH Power Mill Long Blade Length EPPL4□□□-TH	Epoch TH Power Mill, Medium Flute Length EPPM4□□□TH [Alteration Supported Product]	GBE End Mill with Ultra High Pressure Sintered Body	End Mill for High Hardness Steel Machining	SPEED/T Multi-Flute, for High Hardness	Carbide 4-Flute Variable Split Variable Lead High-Hardness End Mill 38°/41° F636TX	GSX MILL VL Hard 2.5D GSXVLH6-2.5D
CAD														2D
Days to Ship	8 Day(s) or more	12 Day(s) or more	Quote	Quote	8 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Quote	Quote	Quote	Quote	Quote	Quote	Quote	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Blade diameter (D)(φ)	1.5 ～ 30	1 ～ 32	0.1 ～ 6	3 ～ 20	5 ～ 12	3 ～ 25	3 ～ 20	1 ～ 20	6 ～ 20	1 ～ 30	6 ～ 12	3 ～ 30	0.2 ～ 2	0.03 ～ 0.1	1 ～ 4	1 ～ 4	3 ～ 20	0.1	0.2 ～ 1	0.1 ～ 6	0.1 ～ 6	5 ～ 12	2 ～ 12	3 ～ 20	1 ～ 6	10 ～ 20	6 ～ 20	3 ～ 20	12	10	6 ～ 25	3 ～ 20	6 ～ 20
Blade length (ℓ)(mm)	5 ～ 55	3.5 ～ 70	0.15 ～ 9	4.5 ～ 30	10 ～ 36	15 ～ 90	8 ～ 38	3 ～ 38	25 ～ 75	2.5 ～ 45	3 ～ 6	10 ～ 55	0.1 ～ 1	0.03 ～ 0.1	2 ～ 8	1.5 ～ 8	8 ～ 38	0.04	0.08 ～ 0.4	0.2 ～ 12	0.3 ～ 18	10 ～ 30	5 ～ 30	4.5 ～ 30	2 ～ 12	45 ～ 75	25 ～ 75	15 ～ 55	6	25	15 ～ 45	8 ～ 38	15 ～ 50
Underneck length (ℓ1)(mm)	-	-	0.3 ～ 50	-	-	-	-	-	-	-	12 ～ 24	-	0.5 ～ 5	-	-	-	-	0.2 ～ 0.5	0.4 ～ 5	-	-	-	-	-	-	-	-	-	13	-	-	-	-
Shank diameter (d)(mm)	6 ～ 32	6 ～ 32	4 ～ 6	6 ～ 20	6 ～ 12	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 32	6 ～ 12	6 ～ 32	4	4	6	6	6 ～ 20	4	4	4 ～ 6	4 ～ 6	6 ～ 12	4 ～ 12	6 ～ 20	6	10 ～ 20	6 ～ 20	6 ～ 20	12	10	6 ～ 25	6 ～ 20	6 ～ 20
Number of flutes(sheet)	4 ～ 8	4 ～ 8	2	4	6	4 ～ 8	4	4 ～ 8	6 ～ 8	4 ～ 8	1	4 ～ 8	1	1	4	4	4	4	6	2	2	6	4	4	4 ～ 6	4	4	4	-	-	6 ～ 8	4	6
Overall Length (L)(mm)	60 ～ 140	60 ～ 175	45 ～ 100	60 ～ 125	60 ～ 90	60 ～ 180	60 ～ 125	50 ～ 100	70 ～ 155	60 ～ 140	50 ～ 75	80 ～ 200	50	50	60	60	60 ～ 125	53	49 ～ 53	45 ～ 50	45 ～ 60	60 ～ 80	45 ～ 80	60 ～ 125	60	100 ～ 155	70 ～ 155	60 ～ 125	55	80	60 ～ 100	57 ～ 104	50 ～ 100
work material	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]	High Hardness Steel-HRC65[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Variable lead
Machining Application	Plane / Side / Groove / Inclined Cuts	Side	Side / Groove	Plane / Side / Groove	Plane / Side	Side	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Side	Side	Side	Side	Side	Side	Side / Groove	Plane / Side / Groove / Inclined Cuts / Countersinking	Side
Coating	TiAlN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	-	-	-	For General Steels (AlCrN, etc.)
Blade tip shape	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Micro R	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	-	Sharp Edge	-	With Lead	Sharp Edge
Type	Square	High Helical	Square	High Helical	Square	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	Square	Square	Square	Square	High Helical	High Helical	Square	High Helical	High Helical	Square	Square	Square	Square	High Helical

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 100
- 103
- 110
- 120
- 130
- 150
- 200
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Narrow search by specifying Manufacturer

- MISUMI (0)
- Economy series (0)
- MITSUBISHI HITACHI TOOL (11)
- NS TOOL (11)
- OSG (4)
- NACHI(FUJIKOSHI) (3)
- 7 LEADERS (1)
- MITSUBISHI MATERIALS (1)
- OMIKOGYO (1)
- Poulten&Graf (1)
- WIDIN (0)
- PROCHI (0)
- ISCAR (0)
- VAN HOORN (0)
- TAIYO-TOOL (0)
- KYOWA SEIKO (0)
- OKAZAKI SEIKO (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- SANKO MFG (0)
- GCT (0)
- GUHRING (0)
- SANDVIK (0)
- MAPAL (0)
- ATOM (0)
- DIJET (0)
- TOYO DRILL (0)
- ASAHI TOOLS (0)
- KYOCERA (0)
- EIKOSHA (0)
- THE CUT (0)
- UNION TOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（work material：High Hardness Steel-HRC65）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Square End Mills (Carbide)（work material：High Hardness Steel-HRC65）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB