(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Square End Mills (Carbide)（work material：Quenched and tempered steel Page2）
| Days to Ship |
|
|---|
-
- On Sale Till 31/03/2025
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Special Price Days to Ship: Same day or more -
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Standard Price: 161,820 IDR- Days to Ship: 8 Day(s) or more -
- On Sale Till 31/03/2025
XAC series carbide square end mill, 4-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- S (Short)
Standard Price: 187,617 IDR- Special Price Days to Ship: Same day or more -
XAC series carbide square end mill, 4-flute / long model
MISUMI
User friendly TiAlN coated series with long flute length
- Volume Discount
- TiAlN
- General Steel
- 4 Flutes
- L (Long)
Standard Price: 312,155 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: 179,165 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute length that is 1.5 times the cutting diameter
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: 179,165 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
MISUMI
The lineup of fine intermediate flute length between short and regular is available only in Misumi
- Volume Discount
- TS
- General Steel
- 2 Flutes
- SR
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
2-flute regular size that can be used for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
MISUMI
Lineups of fine intermediate flute length between regular and long are available only in MISUMI.
- Volume Discount
- TS
- General Steel
- 2 Flutes
- RL
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length 4D type supports deep cavity milling
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suitable for high-speed machining with stub flute with 1.5 times flute length
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: 274,875 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 2.5D Flute Length model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length is 2.5 times the cutting diameter between short and regular flutes
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- SR
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 3.5D Flute Length model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The flute length is 3.5 times the cutting diameter between the regular flute and the long flute
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- RL
Days to Ship: 8 Day(s) or more -
TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 4-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TSC series carbide end mill for key grooves, 2-flute / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·2-flute end mill for keyway machining
·The end cutting edge shape is almost flat, so the workpiece can be finished flat.
·Short flute length type that is resistant to chattering (1.5 times longer than cutting diameter)
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Standard Price: 341,696 IDR- Days to Ship: 8 Day(s) or more -
TSC series carbide radius end mill for countersink, 3-flute / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By leaving the round land width (the width of the cylindrical part without relief angle on the peripheral flute), it is possible to obtain an effect similar to that of a reamer and improve the surface roughness of the machined surface
·The end cutting edge is nearly flat, making it ideal for finishing counterbore holes.
·By adopting 3-flute shape, chattering that tends to occur in drilling and counterboring is suppressed
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: 591,585 IDR- Days to Ship: Same day or more -
Carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Day(s) or more -
Carbide square end mill, 2-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that produces high-quality finish supports a wide range of machining areas
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
Carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
The 2D flute length type with high versatility achieves high-precision processing including grooving
- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 8 Day(s) or more -
Carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 8 Day(s) or more -
Carbide square end mill, 4-flute / 4D Flute Length (long) model
MISUMI
Achieves both high levels of machining precision and reduction of processing time in side milling
- Volume Discount
- Non-Coated
- General Steel
- 4 Flutes
- L (Long)
Days to Ship: 8 Day(s) or more -
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.
- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Standard Price: 1,022,597 IDR- Days to Ship: 8 Day(s) or more -
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time
- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Standard Price: 1,152,746 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 104,235 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 115,336 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: 142,695 IDR- Days to Ship: 8 Day(s) or more -
XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: 125,077 IDR- Days to Ship: Same day or more -
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: 252,859 IDR- Days to Ship: Same day or more -
Carbide Blade Neck Relief End Mill, 2-Flute / Short Model
MISUMI
A blade relief type that's not affected by the interference of tools
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 10 Day(s) or more -
Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model
MISUMI
A blade relief type that's not affected by the interference of tools
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 10 Day(s) or more -
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- General Steel
Days to Ship: 10 Day(s) or more -
Carbide Blade Neck Relief End Mill, 4-Flute / Short Model
MISUMI
Blade relief type with a 4-flute structure
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 10 Day(s) or more -
Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model
MISUMI
Blade relief type with a 4-flute structure
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 10 Day(s) or more -
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Standard Price: 388,756 IDR- Days to Ship: 10 Day(s) or more -
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)
- Volume Discount
Standard Price: 484,793 IDR- Days to Ship: 8 Day(s) or more -
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: 382,118 IDR- Days to Ship: 8 Day(s) or more -
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: 412,427 IDR- Days to Ship: 8 Day(s) or more -
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General purpose blade length regular type 2-flute
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: 191,838 IDR- Days to Ship: 8 Day(s) or more -
NACHI(FUJIKOSHI)
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
Standard Price: 713,841 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
Standard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more -
GSX MILL 2-Flute Blade 2D GSX2C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cuttingStandard Price: 203,632 IDR- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 2-flute / 2.5D Flute Length model | TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model | TSC series carbide square end mill, 2-flute / 3.5D Flute Length model | TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model | TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model | TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model | TSC series carbide square end mill, 4-flute / 2.5D Flute Length model | TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model | TSC series carbide square end mill, 4-flute / 3.5D Flute Length model | TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model | TSC series carbide end mill for key grooves, 2-flute / short model | TSC series carbide radius end mill for countersink, 3-flute / short model | Carbide square end mill, 2-flute / 2D Flute Length (short) model | Carbide square end mill, 2-flute / 3D Flute Length (regular) model | Carbide square end mill, 4-flute / 2D Flute Length (short) model | Carbide square end mill, 4-flute / 3D Flute Length (regular) model | Carbide square end mill, 4-flute / 4D Flute Length (long) model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model | XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | |||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Blade diameter (D)(φ) | 1 ～ 20 | 1 ～ 20 | 2 ～ 20 | 3 ～ 12 | 0.5 ～ 12 | 0.5 ～ 20 | 0.1 ～ 20 | 0.5 ～ 12 | 0.2 ～ 20 | 0.5 ～ 12 | 1 ～ 12 | 2 ～ 12 | 1 ～ 20 | 1 ～ 16 | 1 ～ 20 | 1 ～ 16 | 1 ～ 12 | 2 ～ 14 | 3 ～ 16 | 0.2 ～ 12 | 0.2 ～ 12 | 1 ～ 20 | 2 ～ 20 | 1 ～ 12 | 6 ～ 20 | 6 ～ 20 | 0.5 ～ 20 | 1 ～ 12 | 0.5 ～ 12 | 1.5 ～ 16 | 1 ～ 12 | 6 ～ 12 | 6 ～ 12 | 2 ～ 20 | 6 ～ 12 | 6 ～ 12 | 3.15 ～ 19.99 | 2 ～ 25 | 1 ～ 20 | 1.5 ～ 25 | 0.3 ～ 20 | 1 ～ 20 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 |
| Blade length (ℓ)(mm) | 3 ～ 60 | 2.5 ～ 38 | 6 ～ 38 | 12 ～ 30 | 0.5 ～ 12 | 0.75 ～ 30 | 0.2 ～ 40 | 1.25 ～ 30 | 0.6 ～ 60 | 1.75 ～ 42 | 4 ～ 48 | 3 ～ 18 | 2 ～ 40 | 2.5 ～ 40 | 3 ～ 60 | 3.5 ～ 56 | 4 ～ 48 | 3 ～ 21 | 8 ～ 32 | 0.4 ～ 24 | 0.6 ～ 36 | 2 ～ 40 | 5 ～ 60 | 4 ～ 48 | 15 ～ 50 | 14 ～ 42 | 0.75 ～ 30 | 2.5 ～ 30 | 2 ～ 48 | 3.75 ～ 40 | 4 ～ 48 | - | - | 3 ～ 60 | - | - | 3.5 ～ 48 | 4 ～ 50 | 4 ～ 80 | 6 ～ 120 | 0.6 ～ 45 | 3 ～ 38 | 0.5 ～ 50 | 2.5 ～ 50 | 2 ～ 40 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | 17 ～ 73 | 20 ～ 55 | 23 ～ 92 | 26 ～ 65 | 29 ～ 76 | - | 15 ～ 73 | 20 ～ 73 | 23 ～ 92 | 26 ～ 88 | 29 ～ 70 | - | - | 17 ～ 45 | 23 ～ 55 | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 3 ～ 20 | 4 ～ 12 | 3 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 4 ～ 20 | 6 ～ 16 | 4 ～ 12 | 6 ～ 16 | 6 ～ 16 | 3 ～ 12 | 3 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 16 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 4 ～ 25 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 |
| Number of flutes(sheet) | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 3 | 2 | 2 | 4 | 4 | 4 | 3 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 ～ 4 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 4 ～ 8 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 45 ～ 130 | 40 ～ 105 | 40 ～ 105 | 50 ～ 90 | 40 ～ 65 | 40 ～ 105 | 35 ～ 110 | 45 ～ 85 | 40 ～ 130 | 45 ～ 95 | 45 ～ 100 | 40 ～ 75 | 40 ～ 110 | 45 ～ 105 | 45 ～ 130 | 45 ～ 120 | 45 ～ 100 | 45 ～ 75 | 50 ～ 110 | 35 ～ 75 | 40 ～ 85 | 40 ～ 110 | 45 ～ 130 | 45 ～ 100 | 60 ～ 130 | 60 ～ 120 | 40 ～ 110 | 45 ～ 85 | 45 ～ 100 | 45 ～ 105 | 45 ～ 100 | 45 ～ 75 | 60 ～ 85 | 40 ～ 130 | 45 ～ 75 | 60 ～ 85 | 40 ～ 105 | 50 ～ 120 | 60 ～ 200 | 60 ～ 250 | 40 ～ 100 | 50 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○/◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Variable lead | - | - | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Coating | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | For High Hardness (Silicon Group) / Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | - | - | - | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | C plane | C plane | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | - | - | - | With Lead | With Lead | With Lead | With Lead |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
63
-
64
-
65
-
67
-
70
-
75
-
80
-
83
-
85
-
90
-
100
-
103
-
110
-
120
-
130
-
150
-
200
[4-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- NS TOOL (59)
- OSG (46)
- NACHI(FUJIKOSHI) (36)
- MITSUBISHI HITACHI TOOL (22)
- KYOCERA (15)
- OKAZAKI SEIKO (14)
- ASAHI TOOLS (12)
- SUMITOMO ELECTRIC HARDMETAL (10)
- THE CUT (9)
- KYOWA SEIKO (8)
- ATOM (5)
- TOYO DRILL (4)
- SANKO MFG (4)
- DIJET (3)
- 7 LEADERS (2)
- GCT (2)
- OMIKOGYO (2)
- Poulten&Graf (2)
- UNION TOOL (2)
- PROCHI (1)
- WIDIN (1)
- MITSUBISHI MATERIALS (0)
- ISCAR (0)
- VAN HOORN (0)
- TAIYO-TOOL (0)
- GUHRING (0)
- SANDVIK (0)
- MAPAL (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
Related Categories to Square End Mills (Carbide)
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy