(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Carbide Square End Mills（Machining Application：Plunging (Z feed)）

An online store for carbide square end mills. Divided into categories of square / multi-function / high helical / roughing / long neck square. In MISUMI e-catalog, specifications/dimensions of brand, blade diameter, blade length, shank diameter, total length, compatible work materials, coating, etc. can be selected with one click, so you can easily find the desired carbide square end mill.
[What is a carbide square end mill?]
A type of milling cutter. It is a tool that can perform complicated shaping such as linear or non-linear side surfaces inside grooves and holes, by using a carbide base material, with a cutting edge on the outside or the end surface, and moving the rotated tool in multiple directions. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry.

Search by specifying the lower class category

118 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less

Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Standard Price:	172,154 IDR-
Days to Ship:	2 Day(s) or more

GSX MILL Slot 1.5D GSXSLT-1.5D

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

Standard Price:	417,085 IDR-
Days to Ship:	8 Day(s) or more

X's Mill Geo Slot GEOSLT

NACHI(FUJIKOSHI)

Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.

Standard Price:	670,707 IDR-
Days to Ship:	8 Day(s) or more

GS MILL Slot GSSLT

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

Standard Price:	584,662 IDR-
Days to Ship:	8 Day(s) or more

ZX Coat UPMILL Slot SSUP3000ZX

SUMITOMO ELECTRIC HARDMETAL

The ZX coating provides hardness comparable to the CBN sintered body and increases abrasion resistance, oxidation resistance, and peeling resistance. 6 times longer life than comparable non-coated products.

Standard Price:	1,248,437 IDR
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.

Standard Price:	236,000 IDR-
	Special Price
Days to Ship:	Same day or more

VAC Series Carbide Roughing End Mill

MISUMI

[Features]
・High-speed rotation is possible by adopting a 45° helix.
・Using a fine pitch nick, the surface roughness after processing is also excellent.
・The conductivity is minimal.
《Additional machining》
・Additional neck relief machining can be specified using MISUMI standard tools.
・No need to create drawings. You can order by simply specifying the dimensions using the model number.
・Available starting from 1 piece, ``just the quantity you need when you need it.''
・Delivered on the 3rd day.

Volume Discount

Standard Price:	660,885 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3

OSG

Uses high toughness carbide alloy with high Young's modulus.

Standard Price:	632,170 IDR-
Days to Ship:	8 Day(s) or more

ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS

OSG

End mill that enables continuous grooving after plunging without preprocessing. Number of tools in the magazine can be reduced.

Standard Price:	814,214 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Short_FX-MG-EHS

OSG

Even with the 4-flute grooving, it provides excellent chip discharge and prevents burring with excellent sharpness. A 3-flute version resilient to chatter is also available.

Standard Price:	1,404,150 IDR
Days to Ship:	8 Day(s) or more

Epoch Panacea Square 2-Flute HGOS2□□□-PN [Alterations Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Supports a wide range of machining from mild steel to hardened materials. Suitable for side machining.

Standard Price:	1,142,770 IDR-
Days to Ship:	Quote

End Mill with 2 Carbide Solid Blades KSE-2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Standard Price:	870,709 IDR-
Days to Ship:	10 Day(s) or more

Carbide Long Blade End Mill KSEL-2

KYOWA SEIKO

Carbide long flute length end mill, KSEL-2
·An end mill with 4 to 12 times flute length.
·Helix angle: Standard helix angle (30 to 44°)

Standard Price:	949,657 IDR-
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2025

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

	Special Price
Days to Ship:	Same day or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes

SR
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

L (Long)
Days to Ship: 10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Standard Price:	868,785 IDR-
Days to Ship:	8 Day(s) or more

TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Multi-function square long neck type with high feed capability and excellent durability
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes
Days to Ship: 10 Day(s) or more

Days to Ship:	10 Day(s) or more

Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

MISUMI

A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum

Volume Discount

Non-Coated
Aluminum
3 Flutes
B (Stub)

Standard Price:	331,288 IDR-
Days to Ship:	8 Day(s) or more

TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

MISUMI

MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Standard Price:	483,670 IDR-
Days to Ship:	8 Day(s) or more

Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

MISUMI

Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	153,811 IDR-
Days to Ship:	8 Day(s) or more

Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	245,085 IDR-
Days to Ship:	8 Day(s) or more

Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

MISUMI

Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price

Volume Discount

Non-Coated
Aluminum
2 Flutes

Standard Price:	441,153 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	382,118 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Long Neck Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	252,861 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 4-Flute Uneven Lead Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suppresses chattering with unequal lead and unequal flutes
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Stable machining is possible while maintaining finished surface accuracy
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	404,161 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

MISUMI

[Features]
・Adopts unequal leads to suppress chatter and achieve high efficiency machining
・Optimum groove shape realizes smooth chip discharge
・Minimum electrical conductivity
・Can be re-polished.

Volume Discount

Standard Price:	414,110 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

MISUMI

Volume Discount

Standard Price:	412,427 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide 2-Flute Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General purpose blade length regular type 2-flute
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	191,838 IDR-
Days to Ship:	8 Day(s) or more

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

MISUMI

[Features]
·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	354,951 IDR-
Days to Ship:	8 Day(s) or more

GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Standard Price:	313,124 IDR-
Days to Ship:	8 Day(s) or more

DLC Mill Slot Long Shank DLCSLTLS

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.

Standard Price:	599,991 IDR-
Days to Ship:	8 Day(s) or more

GSX MILL 3-Flute Blade 2D GSX3C-2D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Standard Price:	313,124 IDR-
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE

OSG

[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.

Standard Price:	172,154 IDR-
Days to Ship:	2 Day(s) or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

Standard Price:	172,154 IDR-
	Special Price
Days to Ship:	Same day or more

On Sale Till 31/03/2025

Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE

OSG

2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.

Standard Price:	292,154 IDR-
	Special Price
Days to Ship:	Same day or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

OSG

General purpose type 2-flute ultra-long blade end mill with FX coating for excellent heat resistance.

Standard Price:	1,161,000 IDR
Days to Ship:	8 Day(s) or more

Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL

OSG

Non-coated, 2-flute, and extra-long.

Standard Price:	1,077,658 IDR-
Days to Ship:	8 Day(s) or more

2-Flute Keyway (OH1) MG-EKD [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

for keyway (OH1)

Standard Price:	1,395,385 IDR
Days to Ship:	Quote

DIA Coated 2 Flutes Short_DIA-EDS

OSG

End mill with ultra-microcrystalline diamond coating. The high silicon aluminum alloy material and graphite treatment provides outstanding tool life.

Standard Price:	2,243,800 IDR-
Days to Ship:	8 Day(s) or more

Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS

OSG

End mill featuring an original ultra-smooth new DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.

Standard Price:	779,265 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6

OSG

End mill for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

Standard Price:	956,603 IDR-
Days to Ship:	8 Day(s) or more

ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS

OSG

General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.

Standard Price:	1,074,474 IDR-
Days to Ship:	8 Day(s) or more

2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Standard Price:	608,944 IDR-
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

						On Sale Till 31/03/2025								On Sale Till 31/03/2025																						On Sale Till 31/03/2025	On Sale Till 31/03/2025
Brand	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	OSG	MISUMI	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE	GSX MILL Slot 1.5D GSXSLT-1.5D	X's Mill Geo Slot GEOSLT	GS MILL Slot GSSLT	ZX Coat UPMILL Slot SSUP3000ZX	Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS	VAC Series Carbide Roughing End Mill	Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 3 Flutes Stub for Slotting_WX-SHTSS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated High Helix Short_FX-MG-EHS	Epoch Panacea Square 2-Flute HGOS2□□□-PN [Alterations Supported Product]	End Mill with 2 Carbide Solid Blades KSE-2	Carbide Long Blade End Mill KSEL-2	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type	Carbide Square End Mill for Aluminum Machining / 2-Flute / 55° Spiral / 3D Blade Length (Regular) Type	Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model	VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 2-Flute Long Neck Square End Mill	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 2-Flute Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D	DLC Mill Slot Long Shank DLCSLTLS	GSX MILL 3-Flute Blade 2D GSX3C-2D	Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE	Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL	Micro Grain Carbide End Mills 2 Flutes Extra Long_MG-EXDL	2-Flute Keyway (OH1) MG-EKD [Alterations Available]	DIA Coated 2 Flutes Short_DIA-EDS	Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short (φ6 shank)_FX-EDS-6	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS	2-flute short type MG-EDS [Alterations Available]
Days to Ship	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Same day or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	Quote	10 Day(s) or more	8 Day(s) or more	Same day or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	Same day or more	Same day or more	8 Day(s) or more	8 Day(s) or more	Quote	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications														TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes	Non-Coated Aluminum 3 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes
Blade diameter (D)(φ)	0.1 ～ 30	1 ～ 16	1 ～ 16	3 ～ 16	4	0.1 ～ 12	3 ～ 12	0.2 ～ 2	3 ～ 12	3	0.2 ～ 20	3 ～ 6	0.1 ～ 6	1 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	2 ～ 20	1.5 ～ 5	1 ～ 12	3 ～ 12	0.5 ～ 20	0.5 ～ 20	3 ～ 12	1 ～ 20	0.2 ～ 12	2 ～ 20	3 ～ 25	1.5 ～ 25	0.3 ～ 20	3 ～ 20	1 ～ 20	2 ～ 20	1 ～ 20	0.1 ～ 12	0.1 ～ 20	0.2 ～ 12	3	3 ～ 5	6	0.5 ～ 12	0.5 ～ 12	0.2 ～ 2.5	0.2 ～ 30	1.4 ～ 25
Blade length (ℓ)(mm)	0.2 ～ 60	1.5 ～ 24	3 ～ 32	8 ～ 32	11	0.15 ～ 18	8 ～ 30	0.6 ～ 6	4.5 ～ 18	8	0.4 ～ 40	10 ～ 15	0.3 ～ 60	3 ～ 38	5 ～ 40	5 ～ 56	5 ～ 75	3.5 ～ 30	4.5 ～ 13	1.5 ～ 18	8 ～ 26	1 ～ 40	1.5 ～ 60	15 ～ 60	4 ～ 80	0.3 ～ 20	6 ～ 45	8 ～ 38	6 ～ 120	0.6 ～ 45	7 ～ 26	1.5 ～ 30	3 ～ 30	2.5 ～ 40	0.15 ～ 18	0.3 ～ 60	0.8 ～ 48	20	20 ～ 40	8	1 ～ 26	1 ～ 24	0.3 ～ 3.7	0.4 ～ 45	4 ～ 45
Underneck length (ℓ1)(mm)	-	-	-	-	-	0.3 ～ 60	-	-	-	-	0.6 ～ 20	-	-	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	30 ～ 140	10 ～ 40	3 ～ 36	-	-	-	-	-	0.5 ～ 50	-	-	-	-	-	-	8 ～ 82	-	-	-	-	-	-	-	-	-	1.5 ～ 5	-	-
Shank diameter (d)(mm)	4 ～ 32	4 ～ 16	4 ～ 16	6 ～ 16	6	4 ～ 12	6 ～ 12	3	6 ～ 12	6	4 ～ 20	6	3 ～ 6	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6	4 ～ 12	6 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	6 ～ 20	4 ～ 12	6 ～ 20	6 ～ 25	4 ～ 25	4 ～ 20	6 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	6	6	6	4 ～ 12	4 ～ 12	6	3 ～ 32	4 ～ 25
Number of flutes(sheet)	2	3	3	3	3	2	3 ～ 4	2	3	3	2	2	2	3	3	3	3	3	3	3	4	2	2	2	2	2	4	4	4	2	4	3	3	3	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	45 ～ 140	40 ～ 90	50 ～ 115	50 ～ 115	50	45 ～ 140	50 ～ 80	40	50 ～ 75	50	40 ～ 125	50	40 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	70 ～ 150	80 ～ 200	50 ～ 60	40 ～ 80	60 ～ 100	40 ～ 110	40 ～ 130	60 ～ 130	60 ～ 200	40 ～ 110	50 ～ 100	57 ～ 104	60 ～ 250	40 ～ 100	54 ～ 92	40 ～ 100	50 ～ 200	40 ～ 100	45 ～ 75	45 ～ 130	45 ～ 100	60	60 ～ 80	50	40 ～ 75	40 ～ 75	50	40 ～ 125	40 ～ 120
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	-	-	-	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)
Coating	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	-	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	-	-	-	For General Steels (AlCrN, etc.)	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	Non-Coated	Dia Coat	DLC	TiAlN	TiAlN	Non-Coated
Blade tip shape	Sharp Edge	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	-	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	-	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	-	-	-	-	-	-	-	-	-	-	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead
Type	Square	Square	Square	Square	Square	Long-Neck Square	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Long-Neck Square	Square	Square	Square	Square	Square	Square	Long-Neck Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6H
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8H
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10H
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12H
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57～57.5
  - 57
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 62
- 63
- 64
- 65
- 66
- 67
- 70
- 72
- 75
- 76
- 78
- 80
- 82
- 83
- 85
- 90
- 100
- 103
- 110
- 115
- 120
- 125
- 130
- 150
- 200
[5-75/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11～11.25
  - 11
  - 11.25
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15～15.75
  - 15
  - 15.75
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19～19.6
  - 19
  - 19.6
- 20
- 21
- 22
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35～35.3
  - 35
  - 35.3
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 57
- 60
- 62
- 63
- 64
- 65
- 66
- 70
- 74
- 75
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 108
- 120
- 125
- 130
- 140
- 150
- 200
[10-112/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

22

24

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

7

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

41

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

64

65

66

67

68

69

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

185

190

200

210

215

220

225

230

240

250

260

265

270

280

300

310

320

350

800
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
- IKOU
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Narrow search by specifying Manufacturer

- MISUMI (19)
- Economy series (0)
- OSG (40)
- KYOWA SEIKO (15)
- DIJET (11)
- NACHI(FUJIKOSHI) (6)
- Poulten&Graf (6)
- MITSUBISHI HITACHI TOOL (5)
- NS TOOL (5)
- UNION TOOL (3)
- WIDIN (3)
- GCT (2)
- GUHRING (1)
- OMIKOGYO (1)
- SUMITOMO ELECTRIC HARDMETAL (1)
- MITSUBISHI MATERIALS (0)
- PROCHI (0)
- ISCAR (0)
- TAIYO-TOOL (0)
- SANKO MFG (0)
- SANDVIK (0)
- 7 LEADERS (0)
- THE CUT (0)
- VAN HOORN (0)
- EIKOSHA (0)
- MAPAL (0)
- KYOCERA (0)
- ASAHI TOOLS (0)
- ATOM (0)
- TOYO DRILL (0)
- OKAZAKI SEIKO (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Square End Mills

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Square End Mills（Machining Application：Plunging (Z feed)）

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Square End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Square End Mills（Machining Application：Plunging (Z feed)）

Search by specifying the lower class category

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Square End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB