Connectors (Options, Others)

• 

  Cable Clamp for MS Connectors

  MISUMI

  [Specifications]·A low-cost type MS cable clamp · By attaching it to the MS connector and tightening the cable, it is possible to reduce the load on the cable end and prevent disconnection.

  • Volume Discount

  • MIL

  CAD ：

  2D

  Standard Price:	57,689 IDR-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Round Waterproof Connector (M12) - XS2 - Connector Cover

  OMRON

  The XS2Z-13 and 15 are connectors with covers (dust covers). The XS2Z-31 is connector with a sputter protective cover.
  [Features]
  · Cover for XS2 round waterproof connectors (M12).
  · XS2Z-13 compatible connectors: Models XS2G / XS2H / XS2M / XS2R.
  · XS2Z-15 compatible connectors: Models XS2C / XS2R / XS2F / XS2P / XW3A / XW3B.
  · XS2Z-31 series compatible connectors: Models XS2F / XS2H / XS2W.
  [Applications]
  · Used for round connectors for XS2 series products.
  

  • Volume Discount

  Standard Price:	21,127 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  JL05 Series, Accessory

  JAPANAVIATION

  This is a JL05 series accessory.
  
  [Features]
  · A straight end bell (for mated waterproof type cabtyre cables).
  · Attach to the rear of the plug (JL05-6A) to prevent the intrusion of water, oil, etc., into the wire connections.
  · A straight end bell (non-waterproof type).
  · An accessory that is used if no conduit nut is installed on the rear of the plug (JL05-6A).
  · Available in 2 lengths to match the wiring specifications.
  · Use in in combination with the cable clamps.

  • Volume Discount

  Standard Price:	43,041 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Han Series Accessory (Cable Entry Protection)【1-4 Pieces Per Package】

  HARTING

  This accessory can be mounted to the cable entry of the hood to reduce the routing load of the wiring. It also helps to maintain the waterproof performance (Models are separated using "-" rather than spaces).

  Standard Price:	13,769 IDR-
  Days to Ship:	8 Day(s) or more

• 

  D-Sub Series, Accessory

  JAPANAVIATION

  This is a D sub series accessory.
  
  [Features]
  ■Straight clamp plastic split type D * -C1 (C2)-J * model
  • After making the connection, fix by turning both lock-side screws to join partnering sides with the latch fixing block.
  • There are 3 types of match retention screws: M2.6, M3, and #4-40.
  ■Straight clamp plastic split type D * -C8-J * -B model
  • The match retaining screws and corresponding connectors contain both short-type screws for use with a screw driver (flat or Phillips) as well as long-type screws for tightening by hand. Screws include both millimeter and inch measurement specifications.
  • Split-type junction shell.
  • D*-C1, D*-C2, D*-C8-junction shell (clamp hood) types include two-piece construction for easy access after wiring.

  • Volume Discount

  Standard Price:	13,578 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Coding Pin And Dust-proof Cover For New Spring Type Connector 770 (WINSTA) Series

  WAGO

  New spring-type 770 series connector lock-out cap, coding pin, dust cover, and more are available.

  Standard Price:	26,391 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [ILME Connector Accessories]Board Interface Coding Pin

  ILME

  [Features]
  ・ Accessories for convenient use of ILME connectors
  ・ There are interfaces for PCB, special contact pins, frames, code pins, etc.
  ・ Further notes: By using a cord pin, you can prevent accidental insertion into parallel heterogeneous connectors

  Standard Price:	14,916 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rubber Bushing for MS Connector Cable Clamp MMS3420

  MISUMI

  [Specifications]·Low-cost type MS cable clamp rubber bushing

  • Volume Discount

  • MIL

  CAD ：

  2D

  Standard Price:	20,282 IDR-
  Days to Ship:	8 Day(s) or more

• 

  MISUMI Waterproof Connector, Waterproof Cable Clamp

  MISUMI

  [Specifications]·A low-cost metric thread waterproof clamp · Attach to the cable exit of the hood or relay base for to hold the cable and waterproof the connection.

  • Volume Discount

  • Aluminum Die Cast
  • 2DCAD

  CAD ：

  2D

  Standard Price:	67,440 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing for NJC Series

  NANABOSHI

  [Features]
  ·Used in cable clamps of plugs and adapters.
  ·Used in thin cables or discrete wires.

  Standard Price:	18,037 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Dust-proof Cover For Spring Type Connector

  WAGO

  Spring connector dust cover for the 734, 721, and 231 series. Simply placing the cover on the connector will provide a dust-blocking effect.

  Standard Price:	227,334 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Circular Connector Non-Waterproof Cable Clamp (R1)

  DDK

  Non-waterproof cable clamp for circular connectors.
  [Features]
  ・ An accessory that fixes the cable in combination with the back shell.
  ・ This product has a clamping structure that tightens a cable from both sides with 2 pressing brackets, allowing it be securely fixed at the center.
  ・ Since the cable clamps are with synthetic rubber bushings shown in the table inserted, they can also be used for cables with jackets and bundled wires.
  [Applications]
  ・ The cable is fixed in combination with the back shell.

  • Volume Discount

  Standard Price:	154,811 IDR-
  Days to Ship:	8 Day(s) or more

• 

  D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer)

  MISUMI

  [Specifications]·An accessory that can be mounted on panels with a thickness of 2.3 mm · Compatible with 9- and 25-core cables commonly used in RS232C communication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	82,822 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Plastic Lock for 1600 Series

  HIROSE ELECTRIC

  [Specifications]·A plastic lock for 1600 Series. ·Applications: Plastic lock

  Standard Price:	15,292 IDR
  Days to Ship:	8 Day(s) or more

• 

  RD*G Series Locking Screw【2 Pieces Per Package】

  HIROSE ELECTRIC

  [Specifications]·A dedicated mating locking screw for RD*G Series. ·Operating temperature range (°C): -55 to +85

  • Volume Discount

  Standard Price:	20,654 IDR-
  Days to Ship:	8 Day(s) or more

• 

  CL07 Series Accessories (Waterproof Packing)【100 Pieces Per Package】

  SUMIKO TEC

  3 types of waterproof packing are available, to suit the coating of the wires used.

  Standard Price:	268,439 IDR
  Days to Ship:	8 Day(s) or more

• 

  Cable Clamp

  PROVERTHA

  This is a cable clamp for the PROVERTHA D-sub hood. Please use this product with the PROVERTHA D-sub hood.

  Standard Price:	27,043 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Strain Relief Housing (Cable Stop Cover) For 734 Series Connector

  WAGO

  MCS-MINI 734 series for the cable stop connector cover.
  
  [Specifications]
  　●Application: CAGE CLAMP® connector for male and female connectors
  　●Applicable pin pitch: 2 types, 3.5 mm and 3.81 mm

  Standard Price:	34,040 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TE Connectivity, Crimp Terminal Cover, 1-170823-5 Receptacle

  TE Connectivity

  ·Connector type = Receptacle
  ·Length = 24 mm
  ·Color = Natural
  
  TE Connectivity FASTON 250 Crimp Terminal Insulating Boots Insulating boots for FASTON 250 Crimp Terminal. These FASTON 250 insulation boots are made of semi-transparent plastic and are available in straight and flag styles.

  Standard Price:	1,165 IDR
  Days to Ship:	8 Day(s) or more

• 

  Circular Connector Waterproof Cable Clamp (R1)

  DDK

  Circular connector waterproof cable clamp.
  [Features]
  ・ It is used by attaching to waterproof D/MS, CE01, CE05 plug connectors.
  [Applications]
  ・ It holds the cable and prevents water from getting inside the connector.

  Standard Price:	213,534 IDR
  Days to Ship:	11 Day(s) or more

• 

  Plug, FBS Series

  FESTO

  Standard Price:	1,261,517 IDR
  Days to Ship:	25 Day(s)

• 

  Conversion Connector

  MISUMI

  Can freely convert between D-sub and RJ45.

  • Volume Discount

  Standard Price:	131,839 IDR
  Days to Ship:	8 Day(s) or more

• 

  e-CON Dust-Proof Cover

  MISUMI

  [Specifications]·A dust-proof cover dedicated for e-CON, mountable before or after installation

  • IP54

  Standard Price:	71,523 IDR
  Days to Ship:	8 Day(s) or more

• 

  MS Connector Assembly Support Tool

  MISUMI

  [Specifications]·A convenient tool that supports MS connector assembly. ·The front side is for tightening the plug connector, and the back side is for tightening the inline adapter.

  • Volume Discount

  Standard Price:	440,726 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Attenuator

  MISUMI

  [Specifications]·An attenuator connector used as an output adjustment connector · Attach it to the tip of the connector when use.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	705,615 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Keying Plug for D2000 Series

  TE Connectivity

  Dynamic series optional parts.
  [Features]
  ・ By using a keying plug and creating a further key pattern, misfitting has been prevented
  [Applications]
  ・ It is ideal as a connector for signal and power supply of industrial equipment
  ・ Products for industrial equipment/Products for office equipment

  Standard Price:	28,112 IDR
  Days to Ship:	8 Day(s) or more

• 

  Non-Reflective Terminator

  YUETSU SEIKI

  [Features]
  · Termination solutions are offered for various types of connectors.
  · Dummy loads are available in nominal impedances of either 50 Ω or 75 Ω.
  · These terminators are designed with low reflection coefficients and low loss, and can be used in a wide range of different measurement systems.

  • Volume Discount

  Standard Price:	128,796 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Branch Connector Series

  WEIDMULLER

  [Specifications]·M12 2 branch adapter. ·Screw specification: M3, number of contacts (contact): 5

  Standard Price:	468,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Cable Bushing for NR Series

  NANABOSHI

  [Features]
  ・ This is a cable bushing for the NR Series.

  • Volume Discount

  Standard Price:	34,040 IDR-
  Days to Ship:	8 Day(s) or more

• 

  MR Series Accessories

  HONDA TSUSHIN KOGYO

  [Specifications]·MR Series accessories. ·Compatible connector: MR, MRH Series female connectors in general

  Standard Price:	17,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Spacer for 1600 Series Dip Type

  HIROSE ELECTRIC

  [Specifications]·A spacer for mounting a single connector unit. ·Compatible series: 1600 series

  Standard Price:	14,916 IDR
  Days to Ship:	8 Day(s) or more

• 

  Short Pin for 2.54-mm Pitch Pin Header

  HIROSE ELECTRIC

  2.54-mm pitch short pin (socket) for high density connector.

  Standard Price:	14,791 IDR
  Days to Ship:	8 Day(s) or more

• 

  Polar Key for 2.54-mm Pitch Pin Headers【100 Pieces Per Package】

  HIROSE ELECTRIC

  [Specifications]·2.54 mm pitch, polarity key for pin header. ·Materials: Polyacetal

  Standard Price:	241,831 IDR
  Days to Ship:	8 Day(s) or more

• 

  Short Pin for 2-mm Pitch Pin Header

  HIROSE ELECTRIC

  [Specifications]·2 mm pitch, short pin for pin header. ·Material: phosphor bronze

  Standard Price:	12,083 IDR
  Days to Ship:	8 Day(s) or more

• 

  Polar Key for 2-mm Pitch Pin Header【100 Pieces Per Package】

  HIROSE ELECTRIC

  Polar key for 2-mm pitch pin header.
  
  [Features]
  · Excellent UV/heat resistance for indoor and outdoor use.
  · Smooth fit-through and manufacturing based on standards.
  · In addition, the zip ties (heat-resistant/weatherproof nylon 66) are backed up by various types of data and can be used with high reliability.

  Standard Price:	135,558 IDR
  Days to Ship:	8 Day(s) or more

• 

  Ground Lug Terminal for BNC Connectors

  HIROSE ELECTRIC

  [Specifications]·Earth lug terminal for BNC type coaxial connector. ·Compatible series: BNC Series

  Standard Price:	22,567 IDR
  Days to Ship:	8 Day(s) or more

• 

  Shorting Plug for BNC Connector

  HIROSE ELECTRIC

  [Specifications]·Short plug for BNC type coaxial connector. ·Compatible series: BNC Series

  Standard Price:	805,361 IDR
  Days to Ship:	8 Day(s) or more

• 

  Retainer For DF1E Series【100 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · A retainer for connecting 2.5-mm pitch full-locking discrete wires.

  Standard Price:	178,696 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Retainer for DF22 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · A 7.92-mm pitch connector retainer for internal power supplies supporting high currents.

  Standard Price:	9,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Clamp Metal Fitting For D-sub Connector

  HIROSE ELECTRIC

  A clamp fitting for D-sub connectors.
  
  [Features]
  · Solid and reliable screw-type locking mechanism.
  · The materials are made of tough, plated ABS resin. Therefore, they are lightweight, solid, and provide improved electromagnetic wave shielding.
  · To improve the shielding effect, the cable clamp is secured using 2 types of clamps on the shielding section. The clamp is structured to pinch the plug cases together.
  ・It has screws to allow the cable drain line to fall with the clamp.
  ・Solder (HD), pressure welding (FD/D), and crimping (CD) can be easily incorporated.
  ・However, in the case of the FD/D type, connect the line and use it for items with a fusion-bonded I/O cable.
  ・UL94HB ABS resin is used for plug casing in the CTH type. The plating processing conforms to UL746C standards.

  Standard Price:	60,814 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Screw Lock for D-Sub Connector (for HD-LNA)【2 Pieces Per Package】

  HIROSE ELECTRIC

  [Specifications]·Screw lock for D-sub connector. ·Operating temperature range (°C): -25 to +70

  Standard Price:	50,877 IDR
  Days to Ship:	8 Day(s) or more

• 

  Spring Lock For D-sub Connector

  HIROSE ELECTRIC

  [Specifications]·Spring lock for D-sub connector. ·Compatible series: CTF Series. Operating temperature range (°C): -25 to +70

  Standard Price:	26,626 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Sliding Lock For D-sub Connector

  HIROSE ELECTRIC

  [Specifications]·Sliding lock for D-sub connector. ·Compatible with TF Series. Operating temperature range (°C): -25 to +70

  Standard Price:	96,191 IDR
  Days to Ship:	8 Day(s) or more

• 

  D-sub Connector Lock Metal Fitting【2 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  ▪ SM series (D-sub).
  · A locking bracket accessory.

  Standard Price:	32,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  D-Sub Connector Polarity Key

  HIROSE ELECTRIC

  [Features]
  ・ SM series (D-sub)
  ・ Accessory, polarity key

  Standard Price:	13,280 IDR
  Days to Ship:	11 Day(s) or more

Loading...