Interface Terminal Blocks (Round/Y Terminal Types)

• 

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]
  · The width of the main body is 40 mm in comparison to a DIN rail width of 35 mm.
  · Boasts an even slimmer finish.
  · The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
  · The terminal number and connector number are wired 1-to-1.
  · Circuits can be freely designed.
  · Improves workability when using new screw types.
  · If using a fork type terminal, the PCN series is without doubt the most effective option.
  · A lever type which enables neat and tidy removal from rails.
  · No tools required for removal, and so no need for wasted space on the backside of the main body.
  · Compatible with both rail mounting and direct mounting.

  CAD ：

  2D

  Standard Price:	485,034 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Interface Terminal Block PCX

  TOYOGIKEN

  Standard Price:	992,000 IDR-
  Days to Ship:	1 Day(s)

• 

  PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of a Mitsubishi Electric PLC. It is an input/output PLC connector terminal block allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	352,909 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
  
  [Features]
  · An ultra small size with a pitch between terminals of just 7 mm.
  · Ideal for size reducing PLC or SBC interfaces.
  · A compact type for helping reduce the size of control panels.
  · The connector and terminal block are easy-to-handle 1:1 wire connection types.
  · Uses SS terminal screws for easy wiring.
  · Structured to prevent screws from dropping out and becoming lost.
  · The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
  · Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Standard Price:	460,454 IDR-
  Days to Ship:	Same day or more

• 

  PLC Connector Terminal Block (for OMRON PLC, Input)

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of an OMRON PLC. It is a PLC connector terminal block for input allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	352,909 IDR
  Days to Ship:	8 Day(s) or more

• 

  MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal

  MISUMI

  A 34-position MIL connector terminal block equipped with a KV-Nano series name plate that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	282,270 IDR-
  Days to Ship:	Same day or more

• 

  Wire-to-Wire Connector Terminal Block PS7DW Series

  YOSHIDADENKI

  Convenient for Servo amplifier input/output signals (forced stop input, electromagnetic brake interlock, failure signal, etc.) relaying.

  Standard Price:	760,168 IDR
  Days to Ship:	8 Day(s) or more

• 

  PLC Connector Terminal Block (for OMRON PLC, Output)

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of an OMRON PLC. It is a PLC connector terminal block for output allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Standard Price:	352,909 IDR
  Days to Ship:	8 Day(s) or more

• 

  Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)

  OMRON

  Connector terminal block conversion units designed specifically to connect PLCs.
  [Features]
  ・ The wiring pattern specialized for PLC connection has reduced the trouble of checking the signal layout
  ・ The name paper of the terminal block will be the PLC address
  ・ Connection method is cross-head screw type, straight-slot screw type, push-in type
  ・ Available with and without power supply terminal
  ・ The operability of the push-in terminal has been improved, making it even easier to use
  ・ Connection work has become smoother with a terminal arrangement that takes workability into consideration
  ・ It can be mounted with DIN rail and screws
  ・ With a common design, it can be customized
  ・ The ribs for screw mounting are designed to dive into the DIN rail so that they do not interfere with DIN rail mounting parts or end plates
  ・ Of course, even if XW2Rs are connected to each other, they will be placed without any interference
  [Applications]
  ・ Convert various input devices such as sensors into connectors and use them for PLC input

  • Volume Discount

  Standard Price:	494,286 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Interface Terminal Block PCN7

  TOYOGIKEN

  Standard Price:	1,137,385 IDR-
  Days to Ship:	1 Day(s)

• 

  Terminal Block Hernes SET

  WAGO

  Standard Price:	1,615,385 IDR
  Days to Ship:	12 Day(s)

Loading...