PLC (Wire-Saving Dedicated Units)

• 

  Link Terminal Series B7A

  OMRON

  A PLC (reduced wiring unit) that transmit multiple switch signals using a single cable.
  [Features]
  · Converts 16-point strand wiring to serial.
  · The maximum transmission distance for standard transmission delay times (TYP. 19.2 ms) is 500 m or 100 m for high speed types (TYP. 3 ms).
  · A screw tightening terminal type that can be connected to various types of equipment such as sensors and indicators
  · Equipped with LED indicators for easy operations checks. Can be DIN track mounted or mounted with screws.
  · A compact input/output multi-type with integrated input/output. Supports both contact and non-contact input.
  [Applications]
  · Can be used for exchanging data between PLCs with few I/O points. Can also be used for simple communications using just ON/OFF signals.
  · Ideal for when there are only a few I/O points available and you want to keep the amount of wiring to a minimum.

  Standard Price:	1,867,143 IDR-
  Days to Ship:	Same day or more

• 

  Smart Slave DRT2

  OMRON

  Smart slave DRT2
  
  [Features]
  · Equipped with industry standard e-CON connectors and easily connects to cable pull-out type sensors without special tools.
  · Equipped with functions common to smart slaves in order enable provide effective assistance for the monitoring of equipment operating conditions, as well as effective maintenance.
  · A digital input terminal compatible with industry standard e-CON connectors.
  · Construction can be performed easily without special tools.
  · Reduces wiring man-hours.
  · Equipped with a load short circuit detection function.

  • Volume Discount

  Standard Price:	3,245,038 IDR-
  Days to Ship:	Same day or more

• 

  Relay Terminal Socket G70A-ZOC16

  OMRON

  Relay Terminal Socket G70A-ZOC16

  Standard Price:	2,716,164 IDR-
  Days to Ship:	Same day or more

• 

  EtherNet/IP-DeviceNet Router NE1A-EDR01

  OMRON

  EtherNet/IP-DeviceNet Router NE1A-EDR01

  Standard Price:	16,783,211 IDR
  Days to Ship:	8 Day(s) or more

• 

  CJ series DeviceNet unit

  OMRON

  DeviceNet unit compatible with NJ series and CJ series.
  [Features]
  ・ Achieves maximum 32,000 points (2,000 CH) / master control and guarantees data simultaneity
  ・ Equipped with master-slave functions, simultaneous operation is also possible
  ・ Equipped with various settings and monitor functions that take design efficiency and startup efficiency into consideration, and maximizes performance by using a configurator and CX-Integrator
  ・ Achieves improved debugging and startup efficiency, such as being able to download/upload master-slave configuration files to a memory card

  Standard Price:	10,398,571 IDR
  Days to Ship:	8 Day(s) or more

• 

  Digital I/O Slave CRT1

  OMRON

  OMRON Digital I/O Slave CRT1. Control network type: CompoNet, additional functions: Input/output, communication function

  Standard Price:	2,265,460 IDR-
  Days to Ship:	Same day or more

• 

  DRT2 Connector Terminal

  OMRON

  Ultra-compact 16-point and 32-point remote terminals.
  [Features]
  ·Realizes connection with various I/O interfaces in combination with an interface conversion board.
  ·Width 35 × depth 60 × height 80 mm.
  [Applications]
  ·Terminal unit used for DeviceNet.

  Standard Price:	4,012,327 IDR-
  Days to Ship:	Same day or more

• 

  GX encoder input terminal

  OMRON

  EtherCAT-compatible encoder input terminal that achieves high-speed and accurate control.
  [Features]
  ·Equipped with two counters. Counts pulses in a 32-bit range.
  ·The maximum input pulse frequency is 4 MHz (line driver input, multiplied by 4).
  ·High-speed and accurate control is possible with the ultra-high-speed network EtherCAT connection.
  ·You can choose from open collector input (GX-EC0211) or line driver input (GX-EC0241).
  ·Equipped with 2 external latch inputs and 1 reset input.
  ·Rotary switch setting and tool setting can be selected for the node address.
  ·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.
  ·Equipped with a detachable screw terminal block for improved maintainability.

  Standard Price:	14,448,436 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Analog I/O slave CRT1

  OMRON

  Convert smart. Compute smartly. A simple and smart analog slave.
  [Features]
  ·In addition to inputting and outputting analog data, analog I/O slaves can process various operations inside the unit, such as scaling functions, which conventionally had to be processed on the ladder program of the host PLC.
  ·Analog processing similar to that of a digital panel meter is possible by using calculation functions such as the scaling function.
  ·By using the differentiation/integration function, it is possible to perform analog integration processing such as equipment abnormality prediction and diversion.
  ·By using the user calibration function, it is possible to correct the "deviation" of the input value (or output value).
  ·The input (or output) range can be easily changed by simply setting the switch.

  Standard Price:	6,166,109 IDR-
  Days to Ship:	8 Day(s) or more

• 

  CompoNet bit slave (connector type) CRT1B-□D02JS(-1) / □D04JS(-1)

  OMRON

  CompoNet Bit Slave (Connector Type) CRT1B-□D02JS (-1) / □D04JS (-1)

  Standard Price:	1,948,149 IDR
  Days to Ship:	8 Day(s) or more

• 

  DRT2 board terminal

  OMRON

  Smart slave, board-type PLC (dedicated wiring-saving unit).
  [Features]
  ·It can easily support various I/O interfaces and realizes reduced wiring.
  ·The DRT2-□D32BV (-1) type can be easily attached to a printed circuit board created by the user with screws.
  ·I/O terminal: MIL connector type.
  ·Internal circuit power supply rated voltage: Supplied from communication connector.
  ·Rated voltage of I/O power supply: 24 V DC.

  Standard Price:	6,026,914 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Relay Output Unit GT1-ROS16 / ROP08 / FOP08

  OMRON

  Relay Output Unit GT1-ROS16 / ROP08 / FOP08

  Standard Price:	5,905,129 IDR
  Days to Ship:	8 Day(s) or more

• 

  Expansion Unit XWT

  OMRON

  Expansion unit that allows easy expansion and various I/O combinations.
  [Features]
  ·One extension unit can be combined with one digital I/O slave.
  ·Various I/O combinations such as 16 inputs and 8 outputs are possible, expanding the possibilities of system construction.
  ·The score can be flexibly expanded depending on the combination.
  ·The I/O detachable structure reduces start-up time and improves maintainability.
  ·It is possible to collect a variety of maintenance-related data necessary to improve productivity, such as aging equipment deterioration and equipment operation information.
  [Applications]
  ·Expansion unit for CompoNet network.
  ·Used where additional I/O is required.

  • Volume Discount

  Standard Price:	2,817,795 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Terminal Block Conversion Unit CS1W-AT

  OMRON

  A unit that converts the terminal block of the basic I/O unit of the C500 series into the connector or terminal block of the basic I/O unit of the CS/CJ series.
  [Features]
  ・ The terminal block wiring of the existing C500 series PLC can be used as it is. This makes it possible to reduce the rewiring work labor-hours and the check labor-hours after rewiring (It is necessary to change the wiring of some power supplies and common terminals)
  ・ A connection cable is used for wiring from this unit to the basic I/O unit of the CS/CJ series. This enables CS/CJ series I/O wiring with wire saving labor-hours
  ・ Since the size of the terminal block conversion unit is the same as the basic I/O unit of the original large C series, the terminal block (or connector) can be installed in exactly the same form as before the replacement, without changing the wiring route in the duct
  [Applications]
  ・ For C500/C1000H/C2000H/CV/CVM1

  Standard Price:	1,663,457 IDR-
  Days to Ship:	8 Day(s) or more

• 

  SmartSlice GRT1 Series

  OMRON

  Flexible, application-based I/O configurations are possible, which contribute to reductions in board size, cost, and wiring man-hours.

  Standard Price:	1,701,309 IDR
  Days to Ship:	8 Day(s) or more

• 

  CJ series CompoNet master unit

  OMRON

  A CompoNet master unit compatible with NJ/CJ Series that expands the possibilities in the sensor and actuator area.

  Standard Price:	7,641,429 IDR
  Days to Ship:	Quote

• 

  MECHATROLINK-II supported position control unit CJ1W-NC□71

  OMRON

  MECHATROLINK-II Compatible Position Control Unit CJ1W-NC□71

  Standard Price:	14,263,718 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ether CAT supported position control unit CJ1W-NC□81 / NC□82

  OMRON

  EtherCAT Compatible Position Control Unit CJ1W-NC□81/NC□82

  Standard Price:	24,351,429 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Repeater Unit CRS1-RPT01

  OMRON

  A simple and smart repeater unit that expands the width of your network.
  [Features]
  ·Covers an area of up to 1,500 m by connecting two repeaters. (Communication speed 93.75kbps)
  ·Avoid system down of the entire network due to abnormal stop of the lower layer.
  ·Mixed wiring media is possible by using a repeater.
  ·A variety of network layouts can be achieved by extending trunk lines and branching trunk lines.
  ·By using the setting monitoring tool, it is possible to list the network configuration and identify the location of anomalies.
  ·The communication power supply voltage monitoring function enables voltage monitoring of the entire network.

  Standard Price:	3,822,857 IDR
  Days to Ship:	Quote

• 

  CompoNet Temperature Input Slave CRT1-TS04T / -TS04P

  OMRON

  CompoNet Temperature Input Slave CRT1-TS04T / -TS04P

  Standard Price:	5,337,317 IDR
  Days to Ship:	8 Day(s) or more

• 

  DRT1 Communication Unit

  OMRON

  OMRON's DRT1 Communication Unit. Control network type: DeviceNet additional function: Input/output, communication function

  Standard Price:	4,221,517 IDR
  Days to Ship:	8 Day(s) or more

• 

  DRT2 Analog Input/Output Terminal

  OMRON

  DRT2 Analog Input/Output Terminal

  Standard Price:	6,590,303 IDR
  Days to Ship:	8 Day(s) or more

• 

  DRT2 environmental terminal

  OMRON

  A lineup of remote I/O terminals with high environmental resistance (IP67) and mixed input, output, and input/output types with an emphasis on economy.
  [Features]
  ・ Abnormal diagnosis such as sensor power supply short circuit detection is also possible
  ・ Equipped with a common function for smart slaves, it strongly supports monitoring of the operating status of the device and effective maintenance
  ・ Achieves high environmental resistance dust-proof and drip-proof (IP67)
  ・ For input/output. PNP compatible (input (-) common / output (+) common). 8 points for input / 8 points for output
  ・ I/O connection form: Sensor I/O connector
  ・ Internal circuit power supply rated voltage: Supplied from communication connector
  ・ Rated voltage of I/O power supply: DC24V

  Standard Price:	7,729,888 IDR
  Days to Ship:	8 Day(s) or more

• 

  DRT2 temperature input terminal

  OMRON

  DRT2 Temperature Input Terminal

  Standard Price:	6,590,303 IDR-
  Days to Ship:	8 Day(s) or more

• 

  G70D relay terminal

  OMRON

  [Features]
  · G70D relay terminal.

  Standard Price:	1,877,899 IDR-
  Days to Ship:	Same day or more

• 

  Analog input/output unit GT1-AD / DA

  OMRON

  Analog Input/Output Unit GT1-AD / DA

  Standard Price:	7,020,699 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Digital I/O Unit GT1-ID / OD

  OMRON

  Digital I/O unit compatible with multiple I/O terminals.
  [Features]
  ·Lineup of terminal block type, connector type, and multi-point connector type.
  ·With the terminal block type, the circuit part can be detached. Maintenance can be performed without disconnecting the wiring.
  ·DIN rail mounting.
  ·Total external load current for GT1-OD16/GT1-OD32ML (-1): 4 A.
  ·GT1-OD16ML total external load current: 2.5 A.

  Standard Price:	3,236,650 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Temperature input unit GT1-TS04□

  OMRON

  Temperature Input Unit GT1-TS04□

  Standard Price:	7,441,771 IDR
  Days to Ship:	8 Day(s) or more

• 

  GX analog I/O terminal

  OMRON

  EtherCAT compatible analog I/O terminal with screw type terminal block.
  [Features]
  ·The input range (or output range) can be easily changed by simply setting the switch.
  ·Equipped with a detachable screw-type terminal block for improved maintainability.
  ·Equipped with a moving average calculation function. Configurable from 100µs to 64 ms (input only).
  ·Wire break detection function (input only, when used with 1-5 V, 4-20 mA).
  ·Rotary switch setting and tool setting can be selected for the node address.
  ·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.

  Standard Price:	8,406,324 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Digital I/O Terminal GX

  OMRON

  EtherCAT compatible screw type terminal block type high-speed digital I/O terminal.
  [Features]
  ・ Equipped with a removable screw terminal block for improved maintainability
  ·Expansion unit can be installed. (One extension unit is installed per unit)
  ・ Flexible input/output points can be expanded according to the equipment
  ・ Input response time can be switched to achieve high-speed processing
  ・ Node address can be selected from rotary switch setting and tool setting
  ・ In the case of rotary switch setting, it can be set easily and node identification during maintenance is easy

  Standard Price:	5,392,892 IDR
  Days to Ship:	8 Day(s) or more

• 

  GX digital I/O terminal

  OMRON

  A remote I/O terminal that realizes high-speed communication for various purposes.
  [Features]
  ·Digital I/O terminal: Executes input/output of digital ON/OFF signals.
  ·Equipped with a detachable screw terminal block for improved maintainability.
  ·Expansion units can be installed (one expansion unit can be installed per unit).
  ·The input response time can be switched to achieve high-speed processing.
  [Applications]
  ·Remote I/O terminal for EtherCAT.

  Standard Price:	5,372,653 IDR-
  Days to Ship:	8 Day(s) or more

• 

  EtherCATJunction Slave GX-JC03 / JC06

  OMRON

  EtherCATJunction Slave GX-JC03 / JC06

  Standard Price:	3,047,063 IDR-
  Days to Ship:	Same day or more

• 

  Safety Network Controller NE1A-SCPU Series

  OMRON

  Safety Network Controller NE1A-SCPU Series

  Standard Price:	36,329,532 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Terminal SRT2

  OMRON

  OMRON Terminal SRT2. Ultra compact remote I/O terminal.

  Standard Price:	2,412,857 IDR
  Days to Ship:	Same day

Loading...