Incubator IC Type
Part Number: 61-9660-45

·It is an air jacket natural convection incubator equipped with a temperature controller equipped with a dedicated operation menu key and can be set quickly.
·Due to the air jacket method, a uniform temperature distribution can be obtained.
·Due to the double door structure, heat loss is small and a stable constant temperature can be maintained.
Since the inner door is a reinforced glass door, you can observe the inside.
·Easy-to-operate fixed-value operation, quick auto stop operation, auto stop operation, and auto start operation are possible.
·Calibration offset setting, key lock setting, and overheating prevention temperature setting are possible.
·Fully equipped with safety functions such as self-diagnosis circuit (temperature sensor abnormality, heater disconnection, SSR short circuit, memory abnormality, internal communication abnormality, temperature input circuit abnormality, automatic overheating prevention function), overheating prevention device, earth leakage circuit breaker with overcurrent, etc.

Specificationtitle

• Internal volume (L)

  159

• External Dimensions(mm)

  710×656×870

• Operating Temperature Range(°C)

  Room temperature +5 to 80

• Temperature control accuracy

  ±0.5°C (at 37°C)

• Temperature Distribution Accuracy

  ±1.0°C (at 37°C)

• Maximum Temperature Attained Time

  -

• Shelf Bracket Increment

  30mm

• Number of Shelf Bracket (Stages)

  13

• Shelf Plate Load-Bearing Capacity

  Approx. 15 kg/sheet

• Power supply (50/60 Hz)(V)

  AC100

• Inner Tank Dimensions

  -

• Inner Tank Dimensions (Width × Depth × Height mm)

  600×530×500

• Method

  Air jacket natural convection