Laser Robo, Neo E Sensor
Part Number: 71505

Specifications of 71505

• Product Type

  Laser marking device

• Laser Irradiation

  Horizontal (horizontal line) / Ground marking / 4 vertical directions / Large Model / Base line

• Accuracy

  ±1 mm / 7.5 m

• Power Supply

  -

• Automatic compensation range(°)

  ±3

• Degree of protection for enclosure

  IP54

• Base line accuracy(mm)

  ±1 at 7,500

• Continuous Usable Time(Time)

  (1) Approx. 44.5 (2) Approx. 22 (F) Approx. 7.5 (3) Approx. 9

• Main Body Size(mm)

  128 diameter × 190 height (body section: 105 width and 96 depth)

• Light Source

  Visible semiconductor laser

• Output

  1 mW or less (JIS class 2)

• Wavelength(nm)

  635, lower spot 650

• Vertical point accuracy

  ±1 mm at 3 m

• Right angle accuracy

  90° ±0.03°

• Horizontal line exit angle(°)

  Approx. 115

• Vertical line emission angle(°)

  Approx. 120

• Inclination alarm

  Laser light will blink upon exceeding automatic compensation range (intervals of approx. 1 second)

• Rotation Fine Adjustable Range

  360°

• Damping Method

  Sensor + motor system

• Maximum Distance Achieved(m)

  Approx. 35 (when light receiver is used)

• Accessory

  AC adapter, laser goggles, tripod leveling adapter, aluminum case, AA alkaline batteries × 4

• Mass(g)

  Approx. 1,280

• Battery depletion warning

  The power lamp will blink during use and laser light will blink for 8 seconds (approx. 0.5 second intervals) when powered on. Further battery drain will stop automatic leveling and the light will blink at approx. 1 second intervals.

• Line Light Width(mm)

  Approx. 1.5 mm at 5 m (approx. 2 mm at 7.5 m)

Please check the type/dimensions/specifications of the part 71505 in the Laser Robo, Neo E Sensor series.