(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Pivot Drill Semi-Long Blade (ADRSL-0082)

Pivot Drill Semi-Long Blade ADRSL-0082

Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm).
[Features]
· Blade diameter tolerance +0 to -0.005.
[Applications]
· A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.

Part Number

Configured Part Number is shown.

ADRSL-0082

Pivot Drill Semi-Long Blade Features

Dimensions

Dimensional Drawing

Dimensional Drawing

Unit: mm

Model Number
CODE NUMBER
Diameter
øD
Blade Length
l
Overall Length
L
Shank
d
ADRSL-00040.040.6383
ADRSL-00050.050.8383
ADRSL-00060.060.8383
ADRSL-00090.091.2383
ADRSL-00200.24383
ADRSL-00250.255383
ADRSL-00300.37383
ADRSL-00350.357383
ADRSL-00360.367383
ADRSL-00370.377383
ADRSL-00380.387383
ADRSL-00390.397383
ADRSL-00400.49383
ADRSL-00450.459383
ADRSL-00500.59383
ADRSL-00660.6611383
ADRSL-00670.6711383
ADRSL-00680.6811383
ADRSL-00690.6911383
ADRSL-00700.711383
ADRSL-00710.7111383
ADRSL-00720.7211383

Unit: mm

Model Number
CODE NUMBER
Diameter
øD
Blade Length
l
Overall Length
L
Shank
d
ADRSL-00730.7311383
ADRSL-00740.7411383
ADRSL-00750.7511383
ADRSL-00760.7611383
ADRSL-00770.7711383
ADRSL-00780.7811383
ADRSL-00790.7911383
ADRSL-00800.811383
ADRSL-00810.8111383
ADRSL-00820.8211383
ADRSL-00830.8311383
ADRSL-00840.8411383
ADRSL-00850.8511383
ADRSL-00860.8611383
ADRSL-00870.8711383
ADRSL-00880.8811383
ADRSL-00890.8911383
ADRSL-00900.911383
ADRSL-00910.9111383
ADRSL-00920.9211383
ADRSL-00930.9311383
ADRSL-00940.9411383
  • * Refer to the catalog for model numbers other than those listed above.

Carbide End Mill Cutting Conditions

Work Material
Work
Materials
Carbon Steel / Alloy Steel / Tool SteelStainless SteelNon-Ferrous MetalResin
Carbon Steel
Carbon steel
SS S50C
Alloy Steel
Alloy Steel
SCM SKS
Heat-treated steel
Hardened Steel
NAK SKD
(HRC30-38)
SUS304
Austenitic
SUS304/316
Austenitic
Martensitic/
Ferritic
SUS420/430
Martensitic & Ferritic
Aluminum Alloy
Aluminum Alloy
Copper Alloy
Copper Alloy
Engineering Plastic
Engineering
Plastic
Tip DiameterConditions
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
Number of Rotations
Rotation
(min-1)
Feed
Feed
(mm/rev)
ø0.02 to 0.0910,000 → 20,0000.001 to 0.001510,000 → 20,0000.001 to 0.001510,000 → 20,0000.00110,000 → 20,0000.0005 to 0.00110,000 → 20,0000.001 to 0.001510,000 → 30,0000.001 to 0.00310,000 → 20,0000.001 to 0.00510,000 → 20,0000.001 to 0.003
ø0.1 to 0.2919,000 to 13,0000.002 to 0.0116,000 to 11,0000.0014 to 0.00713,000 to 8,8000.001 to 0.00410,000 to 5,0000.0005 to 0.00113,000 to 8,8000.0005 to 0.00122,200 to 16,5000.005 to 0.0216,000 to 11,0000.002 to 0.00820,000 to 15,0000.005 to 0.01
ø0.3 to 0.4913,000 to 12,0000.01 to 0.0211,000 to 9,7000.007 to 0.018,800 to 6,5000.003 to 0.0055,000 to 4,5000.001 to 0.0058,800 to 6,5000.001 to 0.00516,500 to 13,0000.02 to 0.0411,000 to 11,5000.008 to 0.01515,0000.01 to 0.02
ø0.5 to 0.9912,000 to 9,6000.02 to 0.049,700 to 6,4000.01 to 0.026,500 to 4,8000.005 to 0.014,500 to 3,2000.005 to 0.016,500 to 4,8000.005 to 0.0113,000 to 12,7000.04 to 0.0611,500 to 9,6000.015 to 0.0415,000 to 10,0000.02 to 0.04
ø1 to 1.999,600 to 6,4000.03 to 0.066,400 to 4,0000.02 to 0.053,100 to 2,4000.01 to 0.033,200 to 2,4000.01 to 0.034,800 to 3,2000.01 to 0.0312,700 to 6,4000.06 to 0.129,600 to 4,8000.04 to 0.0810,000 to 6,0000.05 to 0.07
ø2.0 to 3.06,400 to 4,2000.07 to 0.14,000 to 3,2000.05 to 0.082,400 to 1,6000.02 to 0.042,400 to 1,8000.03 to 0.053,200 to 2,1000.03 to 0.056,400 to 5,3000.12 to 0.24,800 to 4,2000.08 to 0.156,000 to 5,0000.07 to 0.1
  • When drilling fine holes, especially ø1.0 (diameter 1.0 mm) or less, first create a guide hole (center hole) prior to drilling. This prevents breakage or chipping when the drill bit bites in.
  • Reduce the drill bit runout when chucking to 0.003 mm or less.
  • If the maximum number of rotations of the machinery used does not reach the above cutting conditions, use at the highest speed possible while still maintaining stability. In this case, the feed rate should also be decreased proportionally.
  • If using with a ø0.5 (diameter 0.5 mm) drill or smaller, prioritize a number of rotations which permits the most stable spindle accuracy over the above cutting conditions.

Related Products

Shrink Fit Holder, Slim Line, Straight Arbor

Shrink Fit Holder, Slim Line, Straight Arbor

Firmly holds small-diameter tools, preventing tool breakage when rotating in idle.

Spray Unit for Mini Cool and Noga Cool

Spray Unit for Mini Cool and Noga Cool

Use to adjust the machining fluid in the workpiece hole when drilling.

Excalibur MT3200

Excalibur MT3200

MISUMI recommends this high performance cutting and machining fluid.

Part Number
ADRSL-0082
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipDiameter φD
(mm)
Blade length ℓ
(mm)
work material Overall Length L
(mm)
Blade diameter tolerance
(mm)

529,124 IDR

1 Piece(s) 12 Day(s) or more 0.8211general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]38+0~-0.005

Loading...

  1. 1

Basic Information

Tool Material Type Carbide Shank Type Pivot Type Coating Y/N NA
Coating Type Non-Coated With/without Oil Hole NA shank d(mm) 3
tip angle(°) 120 Torsion(°) 30

Please check the type/dimensions/specifications of the part ADRSL-0082 in the Pivot Drill Semi-Long Blade series.

Products like this...

Part Number
ADRSL-0006
ADRSL-0007
ADRSL-0008
ADRSL-0083
ADRSL-0084
ADRSL-0085
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipDiameter φD
(mm)
Blade length ℓ
(mm)
work material Overall Length L
(mm)
Blade diameter tolerance
(mm)

1,279,381 IDR

1 Piece(s) 8 Day(s) or more 0.060.8Aluminum[◯] / Quenched and tempered steel[◎] / general steel[◎] / Stainless Steel[◯] / high hardness steel[◯] / Resin[◯]38+0~-0.005

1,153,400 IDR

1 Piece(s) 8 Day(s) or more 0.071.1Aluminum[◯] / Copper[◯] / Quenched and tempered steel[◯] / general steel[◯] / Stainless Steel[◯] / Resin[◯]38+0 to -0.005

986,991 IDR

1 Piece(s) 8 Day(s) or more 0.081.2Aluminum[◯] / Copper[◯] / Quenched and tempered steel[◯] / general steel[◯] / Stainless Steel[◯] / Resin[◯]38+0 to -0.005

458,685 IDR

1 Piece(s) 8 Day(s) or more 0.8311Aluminum[◯] / Quenched and tempered steel[◎] / general steel[◎] / Stainless Steel[◯] / high hardness steel[◯] / Resin[◯]38+0~-0.005

458,685 IDR

1 Piece(s) 8 Day(s) or more 0.8411Aluminum[◯] / Quenched and tempered steel[◎] / general steel[◎] / Stainless Steel[◯] / high hardness steel[◯] / Resin[◯]38+0~-0.005

529,124 IDR

1 Piece(s) 8 Day(s) or more 0.8511Aluminum[◯] / Quenched and tempered steel[◎] / general steel[◎] / Stainless Steel[◯] / high hardness steel[◯] / Resin[◯]38+0~-0.005

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)