Filtration device filter housing made of plastic
Part Number: K-1A-S

filter housing for filtration aimed at removing residual chlorine, turbidity, and iron rust in water.
[Features]
- Tomei plastic body that allows you to check the clogging status of the filter at a glance.
・Cartridges can be replaced by simply turning and screwing the lightweight housing by hand.
・We have a wide range of products, including single-stage ST-1S type and two-stage ST-2S type stand type housing sets.
[Applications]
・Ideal for various types of filtration.
- Convenient for pre-treatment to remove impurities from water purifiers, such as removing dirt from water and removing chlorine from tap water.

Specifications of K-1A-S

• Product Type

  Housing

• Cartridge Replacement

  Corresponds To

• Height(mm)

  315

• Outside Diameter(mm)

  φ189

• Connector Diameter

  One-Touch Joint (Hose End B)

• Trusco Cords

  451-5412

• Weights(g)

  1300

• Standard Flow Rate(L/h)

  1200

• Maximum Usable Output

  0.5 MPa or Less

• Applicable Filter

  CA10M､W-M

• Specifications

  The cartridge is sold separately

• Materials

  Synthetic Resin

• Characteristics

  The transparent plastic body allows for the filter clogging status to be confirmed at a glance. Replacing the cartridge is easy with a simple hand turn of the lightweight housing and screw.

• Applications

  Removal of foreign particles from water. Softening of tap water etc. pre-processing of water purification using a water purifier.

Please check the type/dimensions/specifications of the part K-1A-S in the Filtration device filter housing made of plastic series.