(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Phoenix Series PHC Insert for High Feed Radius Cutter (SDMT09T308SR-GM-XC3020)
Economical through the use of 4 corners. The breaker shape emphasizes sharpness while maintaining cutting-edge rigidity.
Part Number
Configured Part Number is shown.
SDMT09T308SR-GM-XC3020
Product features and specifications
Basic specifications and features of the product
Wide Variations
- A wide variety of small to large diameters makes it possible to handle a wide range of machining areas
- Achieves shortening of machining time in roughing
- Highly efficient machining is possible even in a compact machining center due to low resistance specifications
Optimal specifications for roughing
- Economical 4-corner specifications
- Breaker shape that emphasizes sharpness while maintaining the rigidity of the cutting edge
- Good chip removal capability by smooth cutting chip control
PHC thick flute type
- The thick blade type has a larger tool outer diameter than the shank diameter, making it ideal for deep standing wall machining and pocket machining of mold parts, etc.
Example
Performance/test information
Cutting force by change in notch (ae) - low resistance flute shape -
Low resistance compared to other companies' products.
[Proper Tool Selection]
- PHC09 type: Highly efficient machining with multi-flute specifications
- PHC12 type: Intermittent processing and processing with long protrusions
PHC φ50 cutting data
| Tools to use | PHC09R050M22-5 (5-flute) | PHC12R050M22-4 (4-flute) |
|---|---|---|
| Insert used (grade) | SDMT09T308SR-GM (XP3035) | SXMT120410SR-GM (XP3035) |
| Work material | S50C | |
| Cutting speed | 180 m/minute (1,150 minutes^-1) | |
| Feed speed | 5,000 mm/min | |
| Depth of cut | ap = 1 mm, ae = 5, 10, 20, 30, 35 mm | |
| Protrusion length | 200 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT50) | |
Number of simultaneous contact flutes
Due to the low resistance cutting edge design, the PHC09 type with cross pitch specifications can suppress cutting force even if the depth of cut (ae) increases.
Therefore, machine load and vibration can be suppressed, and highly efficient machining is realized.
Processing data
Mold base roughing
The XC3020, which has high abrasion resistance, can suppress the progress of wear and can increase the durability by approx. 1.5 times.
| Tools to use | PHC07R020SS20-3S (φ20 × 3 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SPMT070305SR-GM (XC3020) | Carbide coating insert |
| Work material | S50C | |
| Cutting speed | 157 m/minute (2,500 minutes^-1) | |
| Feed speed | 6,000 mm/minute (0.8 mm/t) | |
| Depth of cut | ap = 0.5 mm, ae = 14 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT50) | |
Cutting length
Photograph when processing PHC 900 m
Die-cast mold roughing
Roughing of die-cast mold. It was able to do processing twice as efficiently as other companies' products, and had twice the durability. In addition, the color of cutting chips was brown and stable because the calorific value could be suppressed by the low resistance specifications.
| Tools to use | PHC09R063M22-6 (φ63 × 6 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SDMT09T308SR-GM (XP2040) | Carbide coating insert |
| Work material | DAC55 (48HRC) | |
| Cutting speed | 75 m/minute (379 minutes^-1) | 118 m/minute (596 minutes^-1) |
| Feed speed | 1,250 mm/minute (0.55 mm/t) | 600 mm/minute (0.25 mm/t) |
| Depth of cut | ap = 0.7 mm, ae = 25.5 mm | |
| Cutting Oil | N/A (air blow) | |
| Protrusion length | 145 mm | |
| Machine used | Vertical machining center (BT50) | |
Cutting length
Due to the low resistance flute shape, it was possible to process 1.7 times more efficiently compared to other companies' products, and 1.4 times more durability was obtained. In addition, with other companies' products, the workpiece was distorted due to heat generated by processing, but with PHC, the amount of heat generated could be suppressed, so it has been possible to improve the workpiece distortion.
| Tools to use | PHC09R050M22-5 (φ50 × 5 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SDMT09T308SR-GM (XP2040) | Carbide coating insert |
| Work material | SKD61 (48HRC) | |
| Cutting speed | 80 m/minute (510 minutes^-1) | 110 m/minute (700 minutes^-1) |
| Feed speed | 1,360 mm/minute (0.53 mm/t) | 800 mm/minute (0.28 mm/t) |
| Depth of cut | ap = 0.5 mm, ae = 25 mm | |
| Cutting Oil | N/A (air blow) | |
| Protrusion length | 145 mm | |
| Machine used | Horizontal machining center (BT50) | |
Cutting length
Roughing of plastic molds
In roughing the shape of the mold, the durability was approx. twice that of other companies' products.
| Tools to use | PHC12R050M22-4 (φ50 × 4 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SXMT120410SR-GM (XP2040) | Carbide coating insert |
| Work material | PX5 (30HRC) | |
| Cutting speed | 157 m/minute (1,000 minutes^-1) | |
| Feed speed | 3,000 mm/minute (0.75 mm/t) | |
| Depth of cut | ap = 0.75 mm, ae = 25 mm | |
| Cutting Oil | Water-soluble cutting oil | |
| Machine used | Vertical machining center (HSK-A100) | |
Time
Other companies' products had defects at an early stage, but PHC was able to do processing stably, and it was possible to process approx. 3 times as long as them under the same conditions.
| Tools to use | PHC12R063M22-5 (φ63 × 5 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SXMT120410SR-GM (XP2040) | Carbide coating insert |
| Work material | HPM7 (33HRC) | |
| Cutting speed | 100 m/minute (505 minutes^-1) | |
| Feed speed | 2,500 mm/minute (1 mm/t) | |
| Depth of cut | ap = 1.5 mm, ae = 40 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Vertical machining center (BT50) | |
Cutting length
Roughing of press mold
Roughing of steel materials in press mold. The feed couldn't be raised because the other company's product would cause chipping, but with PHC, stable processing was possible under the condition of 20% UP, and 1.5 times the durability was possible.
| Tools to use | PHC12R050M22-4 (φ50 × 4 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SXMT120410SR-GM (XP2040) | Carbide coating insert |
| Work material | SKD11 equivalent | |
| Cutting speed | 112 m/minute (713 minutes^-1) | |
| Feed speed | 2,400 mm/minute (0.84 mm/t) | 2,000 mm/minute (0.7 mm/t) |
| Depth of cut | ap = 1.25 mm, ae = 32.2 mm | |
| Cutting Oil | N/A (air blow) | |
| Machine used | Double-column machining center (BT50) | |
Time
PHC
Long lifespan machining of Inconel 718
With PHC (XC5040) was able to be made more durable by suppressing wear. In addition, there is no cutting chip jam during grooving, and the surface is excellent due to its good chip removal capability.
| Tools to use | PHC07R025SS25-4S (φ25 × 4 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SPMT070305ER-SM (XC5040) | Carbide coating insert |
| Work material | Inconel 718 (41HRC) | |
| Cutting speed | 30 m/min (382 minutes^-1) | |
| Feed speed | 764 mm/minute (0.5 mm/t) | |
| Depth of cut | ap = 0.5 mm, ae = 25 mm | |
| Cutting Oil | Water-soluble cutting oil | |
| Machine used | Horizontal machining center (BT50) | |
Cutting length
PHC (at the time of 13.2 m processing)
Blade roughing
A comparison was made under the same conditions for roughing of the blade, and a durability of 1.75 times was obtained. The insert could do machining stably with normal wear in a state where continuous machining was possible.
| Tools to use | PHC09R032SS32-3S (φ32 × 3 flutes) | Products made by other manufacturers |
|---|---|---|
| Insert used (grade) | SDMT09T308ER-SM (XC5040) | Carbide coating insert |
| Work material | SUS630 | |
| Cutting speed | 80 m/minute (796 minutes^-1) | |
| Feed speed | 800 mm/minute (0.33 mm/t) | |
| Depth of cut | ap = 0.5 mm, ae = 32 mm or less | |
| Cutting Oil | Water-soluble cutting oil | |
| Machine used | Vertical machining center (BT40) | |
Number of workpieces for processing
PHC / other company's product
Drawing
Recommended cutting conditions
Recommended cutting condition table
Maximum tilt angle during ramping (E)
Cutting edge shape definition for program creation
| Insert size | RE | Maximum Notch | Simulated R rt | Remaining allowance Z |
|---|---|---|---|---|
| SPMT07: | 0.5 | 0.8 | 1.2 | 0.35 |
| SDMT09: | 0.8 | 1 | 2 | 0.7 |
| SXMT12: | 1 | 2 | 3 | 1.15 |
When machining, please create a machining program respectively as a simulated R radius cutter.
Precautions for cutting conditions
The values in the recommended cutting condition table show general values at actual cutting speed. Please adjust appropriately according to the cutting environment.
Compatible work material
Recommended material for each work material
◎: First recommended material○: Second recommended material
| Insert material | Breaker | Cutting Oil | P | M | K | N | S | H |
|---|---|---|---|---|---|---|---|---|
| XC3020 | GM | No | ◎ | — | ○ | — | — | — |
| XP3025 | GM | Available | ◎ | — | ○ | — | — | — |
| XC3030 | GM | No | ◎ | — | ○ | — | — | — |
| XP3035 | GM | No | ◎ | ○ | ○ | — | — | — |
| Available | ||||||||
| XP2025 | GM | Available | ○ | ◎ | — | — | ○ | — |
| XP2040 | GM | No | ○ | ○ | — | — | — | ○ |
| Available | ○ | ◎ | — | — | ○ | — | ||
| XC1015 | GM | No | — | — | ◎ | — | — | — |
| XC5035 | SM | No | — | ◎ | — | — | — | — |
| Available | — | ○ | — | — | ○ | — | ||
| XC5040 | SM | Available | — | ○ | — | — | ◎ | — |
GM: For medium cutting · SM: For heat-resistant alloys
Selection support information
High feed radius cutter, straight shank type, PHC SS
Type 1
With oil hole
Type 2
With oil hole
PHC07 type
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Shank diameter DCON | Overall length LF | Body length LH | APMX | Weight (kg) | Compatible insert | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7800750 | PHC07R016SS16-2S | 16 | 7.4 | 2 | 16 | 100 | 30 | 0.8 | 0.13 | (1) | 1 |
| 7800755 | PHC07R016SS16-2L | 16 | 7.4 | 2 | 16 | 150 | 50 | 0.8 | 0.20 | 1 | |
| 7800756 | PHC07R017SS16-2L | ※ 17 | 8.4 | 2 | 16 | 150 | 25 | 0.8 | 0.21 | 2 | |
| 7800757 | PHC07R018SS16-2L | ※ 18 | 9.4 | 2 | 16 | 150 | 25 | 0.8 | 0.21 | 2 | |
| 7800751 | PHC07R020SS20-3S | 20 | 11.4 | 3 | 20 | 130 | 50 | 0.8 | 0.27 | 1 | |
| 7800758 | PHC07R020SS20-3L | 20 | 11.4 | 3 | 20 | 160 | 80 | 0.8 | 0.33 | 1 | |
| 7800759 | PHC07R021SS20-3L | ※ 21 | 12.4 | 3 | 20 | 160 | 30 | 0.8 | 0.35 | 2 | |
| 7800760 | PHC07R022SS20-3L | ※ 22 | 13.4 | 3 | 20 | 160 | 30 | 0.8 | 0.35 | 2 | |
| 7800752 | PHC07R025SS25-4S | 25 | 16.4 | 4 | 25 | 140 | 60 | 0.8 | 0.47 | 1 | |
| 7800761 | PHC07R025SS25-4L | 25 | 16.4 | 4 | 25 | 200 | 100 | 0.8 | 0.67 | 1 | |
| 7800762 | PHC07R026SS25-4L | ※ 26 | 17.4 | 4 | 25 | 200 | 40 | 0.8 | 0.67 | 2 | |
| 7800763 | PHC07R028SS25-4L | ※ 28 | 19.4 | 4 | 25 | 200 | 40 | 0.8 | 0.67 | 2 | |
| 7800753 | PHC07R030SS32-4S | 30 | 21.4 | 4 | 32 | 150 | 70 | 0.8 | 0.79 | 1 | |
| 7800764 | PHC07R030SS32-4L | 30 | 21.4 | 4 | 32 | 200 | 120 | 0.8 | 1.05 | 1 | |
| 7800754 | PHC07R032SS32-5S | 32 | 23.4 | 5 | 32 | 150 | 70 | 0.8 | 0.83 | 1 | |
| 7800765 | PHC07R032SS32-5L | 32 | 23.4 | 5 | 32 | 200 | 120 | 0.8 | 1.11 | 1 | |
| 7800766 | PHC07R033SS32-5L | ※ 33 | 24.4 | 5 | 32 | 200 | 50 | 0.8 | 1.15 | 2 | |
| 7800767 | PHC07R035SS32-5L | ※ 35 | 26.4 | 5 | 32 | 200 | 50 | 0.8 | 1.17 | 2 |
PHC09 type
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Shank diameter DCON | Overall length LF | Body length LH | APMX | Weight (kg) | Compatible insert | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7800700 | PHC09R025SS25-2S | 25 | 13.2 | 2 | 25 | 140 | 60 | 1 | 0.43 | (2) | 1 |
| 7800704 | PHC09R025SS25-2L | 25 | 13.2 | 2 | 25 | 200 | 120 | 1 | 0.61 | 1 | |
| 7800724 | PHC09R025SS25-2LL | 25 | 13.2 | 2 | 25 | 300 | 180 | 1 | 0.97 | 1 | |
| 7800701 | PHC09R025SS25-3S | 25 | 13.2 | 3 | 25 | 140 | 60 | 1 | 0.43 | 1 | |
| 7800705 | PHC09R025SS25-3L | 25 | 13.2 | 3 | 25 | 200 | 120 | 1 | 0.61 | 1 | |
| 7800742 | PHC09R026SS25-2LL | ※ 26 | 14.2 | 2 | 25 | 300 | 40 | 1 | 1.03 | 2 | |
| 7800740 | PHC09R026SS25-3L | ※ 26 | 14.2 | 3 | 25 | 200 | 40 | 1 | 0.65 | 2 | |
| 7800725 | PHC09R028SS25-2LL | ※ 28 | 16.2 | 2 | 25 | 300 | 40 | 1 | 1.01 | 2 | |
| 7800716 | PHC09R028SS25-3S | ※ 28 | 16.2 | 3 | 25 | 140 | 40 | 1 | 0.45 | 2 | |
| 7800720 | PHC09R028SS25-3L | ※ 28 | 16.2 | 3 | 25 | 200 | 40 | 1 | 0.66 | 2 | |
| 7800726 | PHC09R030SS32-2LL | 30 | 18.2 | 2 | 32 | 300 | 180 | 1 | 1.54 | 1 | |
| 7800717 | PHC09R030SS32-3S | 30 | 18.2 | 3 | 32 | 150 | 70 | 1 | 0.76 | 1 | |
| 7800721 | PHC09R030SS32-3L | 30 | 18.2 | 3 | 32 | 200 | 120 | 1 | 1.00 | 1 | |
| 7800727 | PHC09R032SS32-2LL | 32 | 20.2 | 2 | 32 | 300 | 180 | 1 | 1.66 | 1 | |
| 7800702 | PHC09R032SS32-3S | 32 | 20.2 | 3 | 32 | 150 | 70 | 1 | 0.79 | 1 | |
| 7800706 | PHC09R032SS32-3L | 32 | 20.2 | 3 | 32 | 200 | 120 | 1 | 1.05 | 1 | |
| 7800743 | PHC09R033SS32-2LL | ※ 33 | 21.2 | 2 | 32 | 300 | 50 | 1 | 1.71 | 2 | |
| 7800741 | PHC09R033SS32-3L | ※ 33 | 21.2 | 3 | 32 | 200 | 50 | 1 | 1.11 | 2 | |
| 7800728 | PHC09R035SS32-2LL | ※ 35 | 23.2 | 2 | 32 | 300 | 50 | 1 | 1.73 | 2 | |
| 7800718 | PHC09R035SS32-3S | ※ 35 | 23.2 | 3 | 32 | 150 | 50 | 1 | 0.83 | 2 | |
| 7800722 | PHC09R035SS32-3L | ※ 35 | 23.2 | 3 | 32 | 200 | 50 | 1 | 1.12 | 2 | |
| 7800729 | PHC09R040SS42-2LL | 40 | 28.2 | 2 | 42 | 300 | 70 | 1 | 2.91 | 1 | |
| 7800723 | PHC09R040SS42-3L | 40 | 28.2 | 3 | 42 | 250 | 70 | 1 | 2.37 | 1 | |
| 7800703 | PHC09R040SS32-4S | 40 | 28.2 | 4 | 32 | 150 | 50 | 1 | 0.86 | 2 | |
| 7800719 | PHC09R040SS42-4S | 40 | 28.2 | 4 | 42 | 150 | 50 | 1 | 1.38 | 1 | |
| 7800707 | PHC09R040SS32-4L | 40 | 28.2 | 4 | 32 | 250 | 50 | 1 | 1.45 | 2 |
PHC12 type
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Shank diameter DCON | Overall length LF | Body length LH | APMX | Weight (kg) | Compatible insert | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 7800730 | PHC12R030SS32-2S | 30 | 13.4 | 2 | 32 | 150 | 70 | 2 | 0.74 | (3) | 1 |
| 7800733 | PHC12R030SS32-2L | 30 | 13.4 | 2 | 32 | 200 | 120 | 2 | 0.97 | 1 | |
| 7800736 | PHC12R030SS32-2LL | 30 | 13.4 | 2 | 32 | 300 | 180 | 2 | 1.52 | 1 | |
| 7800708 | PHC12R032SS32-2S | 32 | 15.4 | 2 | 32 | 150 | 70 | 2 | 0.80 | 1 | |
| 7800712 | PHC12R032SS32-2L | 32 | 15.4 | 2 | 32 | 200 | 120 | 2 | 1.06 | 1 | |
| 7800737 | PHC12R032SS32-2LL | 32 | 15.4 | 2 | 32 | 300 | 180 | 2 | 1.65 | 1 | |
| 7800744 | PHC12R033SS32-2L | ※ 33 | 16.4 | 2 | 32 | 200 | 50 | 2 | 1.11 | 2 | |
| 7800745 | PHC12R033SS32-2LL | ※ 33 | 16.4 | 2 | 32 | 300 | 50 | 2 | 1.70 | 2 | |
| 7800738 | PHC12R035SS32-2LL | ※ 35 | 18.4 | 2 | 32 | 300 | 50 | 2 | 1.71 | 2 | |
| 7800731 | PHC12R035SS32-3S | ※ 35 | 18.4 | 3 | 32 | 150 | 50 | 2 | 0.81 | 2 | |
| 7800734 | PHC12R035SS32-3L | ※ 35 | 18.4 | 3 | 32 | 200 | 50 | 2 | 1.11 | 2 | |
| 7800739 | PHC12R040SS42-2LL | 40 | 23.4 | 2 | 42 | 300 | 70 | 2 | 2.88 | 1 | |
| 7800709 | PHC12R040SS32-3S | 40 | 23.4 | 3 | 32 | 150 | 50 | 2 | 0.85 | 2 | |
| 7800732 | PHC12R040SS42-3S | 40 | 23.4 | 3 | 42 | 150 | 50 | 2 | 1.37 | 1 | |
| 7800713 | PHC12R040SS32-3L | 40 | 23.4 | 3 | 32 | 250 | 50 | 2 | 1.44 | 2 | |
| 7800735 | PHC12R040SS42-3L | 40 | 23.4 | 3 | 42 | 250 | 70 | 2 | 2.36 | 1 | |
| 7800710 | PHC12R050SS42-4S | 50 | 33.4 | 4 | 42 | 150 | 50 | 2 | 1.50 | 2 | |
| 7800714 | PHC12R050SS42-4L | 50 | 33.4 | 4 | 42 | 250 | 50 | 2 | 2.55 | 2 | |
| 7800711 | PHC12R063SS42-5S | 63 | 46.4 | 5 | 42 | 150 | 50 | 2 | 1.67 | 2 | |
| 7800715 | PHC12R063SS42-5L | 63 | 46.4 | 5 | 42 | 250 | 50 | 2 | 2.71 | 2 |
* Thick flute type
High feed radius cutter, bore type, PHC BORE
Type 1 (power screw specification)
With oil hole
Type 2
With oil hole
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Cutter Height LF | Boss diameter DCSFMS | Hole diameter DCON | Flange keyway | APMX | Weight (kg) | Compatible insert | Shape Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width KWW | Depth b | ||||||||||||
| 7800600 | PHC09R040M16-4 | 40 | 28.2 | 4 | 40 | 38 | 16 | 8.4 | 5.6 | 1 | 0.23 | (2.) | 1 |
| 7800601 | PHC09R050M22-5 | 50 | 38.2 | 5 | 50 | 47 | 22 | 10.4 | 6.3 | 1 | 0.43 | 2 | |
| 7800605 | PHC09R050M22.2-5 | 50 | 38.2 | 5 | 50 | 47 | 22.225 | 8.4 | 5 | 1 | 0.44 | 2 | |
| 7800603 | PHC09R063M22-6 | 63 | 51.2 | 6 | 50 | 60 | 22 | 10.4 | 6.3 | 1 | 0.79 | 2 | |
| 7800606 | PHC09R063M22.2-6 | 63 | 51.2 | 6 | 50 | 60 | 22.225 | 8.4 | 5 | 1 | 0.79 | 2 | |
| 7800607 | PHC12R040M16-3 | 40 | 23.4 | 3 | 40 | 38 | 16 | 8.4 | 5.6 | 2 | 0.21 | (3) | 1 |
| 7800608 | PHC12R050M22-4 | 50 | 33.4 | 4 | 50 | 47 | 22 | 10.4 | 6.3 | 2 | 0.41 | 2 | |
| 7800614 | PHC12R050M22.2-4 | 50 | 33.4 | 4 | 50 | 47 | 22.225 | 8.4 | 5 | 2 | 0.41 | 2 | |
| 7800610 | PHC12R063M22-5 | 63 | 46.4 | 5 | 50 | 60 | 22 | 10.4 | 6.3 | 2 | 0.75 | 2 | |
| 7800615 | PHC12R063M22.2-5 | 63 | 46.4 | 5 | 50 | 60 | 22.225 | 8.4 | 5 | 2 | 0.75 | 2 | |
| 7800618 | PHC12R080M31.7-5 | 80 | 63.4 | 5 | 63 | 76 | 31.75 | 12.7 | 8 | 2 | 1.54 | 2 | |
| 7800612 | PHC12R080M27-7 | 80 | 63.4 | 7 | 50 | 76 | 27 | 12.4 | 7 | 2 | 1.24 | 2 | |
| 7800616 | PHC12R080M31.7-7 | 80 | 63.4 | 7 | 63 | 76 | 31.75 | 12.7 | 8 | 2 | 1.50 | 2 | |
| 7800617 | PHC12R100M31.7-8 | 100 | 83.4 | 8 | 63 | 96 | 31.75 | 12.7 | 8 | 2 | 2.72 | 2 | |
| 7800613 | PHC12R100M32-8 | 100 | 83.4 | 8 | 63 | 96 | 32 | 14.4 | 8 | 2 | 2.72 | 2 | |
High feed radius cutter, screw-in type, PHC SF
With oil hole
| Tool No. | Nominal | Cutter Outer diameter DCX | Outer diameter DC | Number of flutes ZEFP | Mounting diameter DCON | Screw size CRKS | Wrench Size | Overall length LF | End face diameter DCSFMS | APMX | Weight (kg) | Compatible insert |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7801520 | PHC07R016SF8-2 | 16 | 7.4 | 2 | 8.5 | M8 | 10 | 27 | 14.5 | 0.8 | 0.03 | (1) |
| 7801521 | PHC07R017SF8-2 | ※ 17 | 8.4 | 2 | 8.5 | M8 | 10 | 27 | 14.5 | 0.8 | 0.03 | |
| 7801522 | PHC07R018SF8-2 | ※ 18 | 9.4 | 2 | 8.5 | M8 | 10 | 27 | 14.5 | 0.8 | 0.03 | |
| 7801523 | PHC07R020SF10-3 | 20 | 11.4 | 3 | 10.5 | M10 | 14 | 33 | 18 | 0.8 | 0.06 | |
| 7801524 | PHC07R021SF10-3 | ※ 21 | 12.4 | 3 | 10.5 | M10 | 14 | 33 | 18 | 0.8 | 0.06 | |
| 7801525 | PHC07R022SF10-3 | ※ 22 | 13.4 | 3 | 10.5 | M10 | 14 | 33 | 18 | 0.8 | 0.06 | |
| 7801526 | PHC07R025SF12-4 | 25 | 16.4 | 4 | 12.5 | M12 | 17 | 35 | 23 | 0.8 | 0.10 | |
| 7801527 | PHC07R026SF12-4 | ※ 26 | 17.4 | 4 | 12.5 | M12 | 17 | 35 | 23 | 0.8 | 0.10 | |
| 7801528 | PHC07R028SF12-4 | ※ 28 | 19.4 | 4 | 12.5 | M12 | 17 | 35 | 23 | 0.8 | 0.11 | |
| 7801529 | PHC07R030SF16-4 | 30 | 21.4 | 4 | 17 | M16 | 22 | 40 | 28 | 0.8 | 0.20 | |
| 7801530 | PHC07R032SF16-5 | 32 | 23.4 | 5 | 17 | M16 | 22 | 40 | 28 | 0.8 | 0.18 | |
| 7801531 | PHC07R033SF16-5 | ※ 33 | 24.4 | 5 | 17 | M16 | 22 | 40 | 28 | 0.8 | 0.18 | |
| 7801532 | PHC07R035SF16-5 | ※ 35 | 26.4 | 5 | 17 | M16 | 22 | 40 | 28 | 0.8 | 0.20 | |
| 7801500 | PHC09R025SF12-3 | 25 | 13.2 | 3 | 12.5 | M12 | 17 | 35 | 23 | 1 | 0.10 | (2) |
| 7801510 | PHC09R026SF12-3 | ※ 26 | 14.2 | 3 | 12.5 | M12 | 17 | 35 | 23 | 1 | 0.11 | |
| 7801501 | PHC09R028SF12-3 | ※ 28 | 16.2 | 3 | 12.5 | M12 | 17 | 35 | 23 | 1 | 0.11 | |
| 7801502 | PHC09R030SF16-3 | 30 | 18.2 | 3 | 17 | M16 | 22 | 40 | 28 | 1 | 0.17 | |
| 7801503 | PHC09R032SF16-3 | 32 | 20.2 | 3 | 17 | M16 | 22 | 40 | 28 | 1 | 0.18 | |
| 7801511 | PHC09R033SF16-3 | ※ 33 | 21.2 | 3 | 17 | M16 | 22 | 40 | 28 | 1 | 0.19 | |
| 7801504 | PHC09R035SF16-3 | ※ 35 | 23.2 | 3 | 17 | M16 | 22 | 40 | 28 | 1 | 0.19 | |
| 7801505 | PHC09R040SF16-4 | 40 | 28.2 | 4 | 17 | M16 | 22 | 40 | 28 | 1 | 0.22 | |
| 7801506 | PHC12R030SF16-2 | 30 | 13.4 | 2 | 17 | M16 | 22 | 40 | 28 | 2 | 0.17 | (3) |
| 7801507 | PHC12R032SF16-2 | 32 | 15.4 | 2 | 17 | M16 | 22 | 40 | 28 | 2 | 0.18 | |
| 7801512 | PHC12R033SF16-2 | ※ 33 | 16.4 | 2 | 17 | M16 | 22 | 40 | 28 | 2 | 0.19 | |
| 7801508 | PHC12R035SF16-3 | ※ 35 | 18.4 | 3 | 17 | M16 | 22 | 40 | 28 | 2 | 0.18 | |
| 7801509 | PHC12R040SF16-3 | 40 | 23.4 | 3 | 17 | M16 | 22 | 40 | 28 | 2 | 0.22 |
* Thick flute type
(1) to (3) are equivalent to the compatible insert numbers in the parts table.
Part
Please purchase the wrench separately.
| Part Number |
|---|
| SDMT09T308SR-GM-XC3020 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Clearance Angle | Work Material | Data for CAM / Tool Management Software | Material Type | Nominal | Work material details | Tool No. | Tool No | Dimension Thickness T (mm) | A x B (mm) | R (mm) | Sub Blade B (mm) | Availability of CAD Data (2D/3D) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
169,016 IDR | 10 Piece(s) | 8 Day(s) or more | D (15°) | Steel / Cast Iron | zoller | XC3020 | SDMT09T308SR-GM | - | 7827020 | - | 3.97 | 9.52×9.52 | 0.8 | - | 2D/3D |
Loading...
Basic Information
| Shape (First Character in Model Number) | S (Square) | Material | Coating | Number of Teeth | 4 |
|---|
Specification/Dimensions
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Heat-Resistant Alloy, Titanium Alloy
-
Work material details
- Heat-resistant steel
-
type
- SDMT
- SPMT
- SXMT
-
Clearance Angle
- P (11°)
- D (15°)
- Others
-
Data for CAM / Tool Management Software
- zoller
-
Material Type
-
Nominal
-
Tool No.
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy