(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Deep Hole Inner Diameter Measuring Instrument

Deep Hole Inner Diameter Measuring Instrument

Can measure deep internal diameters (maximum length 10 m). Using the digital display, anyone can take measurements easily without any special skills. Internal diameter dimensions are measurable within ±0.6 mm.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
EMCC-2
EMCC-3
EMCC-4
EMCC-5
EMCC-6
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipMeasuring Range (inner diameter)
(mm)
Measuring depth Attached Interchangeable Rod Attached Gauge Head Size A
(mm)
Size B
(mm)
Dimension C
(mm)
Size D
(mm)
Size E
(mm)
Dimension F
(mm)
Dimension G MIN
(mm)
Dimension G MAX
(mm)
Interchangeable Washer Thickness
((mm) x number)

17,861,122 IDR

1 Piece(s) 10 Day(s) or more 35~6070mm~10m5 mm Jumps: 6 PiecesL=33 m (Flat Manufacture)70203062152235601・2・3×1

19,412,929 IDR

1 Piece(s) 10 Day(s) or more 50~10090mm~10m5 mm Jumps: 11 PiecesL=33 m (Flat Manufacture)713040822030501001・2・3×1

23,802,728 IDR

1 Piece(s) 10 Day(s) or more 100~160120mm~10m10 mm increments, 7L=44 mm (Flat Manufacture)77405511538501001601・2・3・4×1

30,063,324 IDR

1 Piece(s) 10 Day(s) or more 160~250130mm~10m10 mm increments, 10L=44 mm (Flat Manufacture)77456012558701602501・2・3・4×1

34,972,934 IDR

1 Piece(s) 10 Day(s) or more 250~400150mm~10m10 mm increments, 16L=44 mm (Flat Manufacture)775070140881002504001・2・3・4×1

Loading...

  1. 1

Basic Information

Gauge Head Travel / Measuring Force 1.4 mm 2 N or less Extension Rod EMCC-L (1 m rod x 10 = 10 m): Sold separately. Applicable linear gauge (1) D-5B When Minimum Display Amount = 10 μm/D-5SB When Minimum Display Amount = 1 μm
Applicable counter (2) C-500 (10 μm, 1 μm compatible type) Operation Upon matching to the master, measurement is completed by simply slowly pushing the workpiece forward, inserting it into the head. There is no need to shake the head due to the automatic centering mechanism. Function Measurement is executed with workpiece in horizontal position (measurement in vertical position is not available).
Option Printer (PDP-1N) / Printer Connection Cable KB-C232 Features It can measure deep internal diameters (maximum 10 m deep). With the digital display, anyone can use it to measure without requiring special skills. Measurements within a ±0.6 mm range of the internal diameter dimensions is possible.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)