Preset Type Torque Wrench (insertion angle 6.3 to 25.4 mm)
Part Number: CMPB1003

[Features]
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.

Specifications of CMPB1003

• Specifications

  • STOCK

• Product Type

  Preset Mold

• Torque adjustment range(N·m)

  20~100

• Insertion Angle(mm)

  9.5

• Minimum graduation(N·m)

  0.5

• Overall Length(mm)

  397

• Torque Precision(±%)

  4

• Main body: option

  Main Body

• Trusco Code

  330-9118

• Mass(g)

  900

• Features

  The torque value to be measured can be pre-set in advance, and this is especially effective for use when work is continuous, and when gradations are difficult to read. A locking function after the measuring value has been set is included. Measuring action not only on the right torque but also on the left torque is enabled. As the head width is narrow, this can also be used to measure areas where no other devices in the past could measure. A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and keeping high accuracy.

• Application

  For general tightening tasks.

• Load direction

  Left/ right

Please check the type/dimensions/specifications of the part CMPB1003 in the Preset Type Torque Wrench (insertion angle 6.3 to 25.4 mm) series.