α Tapping Spray for Difficult-to-Cut Materials
Part Number: ALP-TS-JB

Refill for "α Tapping" spray, a non-chlorine tapping cutting agent (for difficult-to-machine materials).
[Features]
· Nonchlorinated cutting oil that causes almost no chlorine gas generation or peripheral corrosion.
· Provides a beautiful processed surface for cutting hard-to-cut material such as stainless steel.
· Does not cause galling or cracks on hard-to-cut material and enables machining with low torque.
[Applications]
· For tapping and die processing: Demonstrates efficacy with fine-pitched screws, deep screws, and small-diameter screws.
· For reamer processing: Effective for finishing small diameter holes and deep holes.
· For drilling: Smooth cutting can be done with deep drilling as well, and it has good chip removal.

Specifications of ALP-TS-JB

• Type

  Spray

• Properties

  Cut Resistant

• Color

  Yellow

• Trusco Code

  370-9973

• Mass(g)

  810

• Application

  For tapping, die processing, drilling, and reaming. For difficult-to-cut materials.

• Main Ingredient

  Mineral Oil, Synthetic Oil, Extreme-pressure Additives

• Operating Temperature Range(°C)

  100 or Less

• Features

  Provides a beautiful processed surface for cutting hard-to-cut material such as stainless steel. Does not cause galling or cracks on hard-to-cut material and enables processing with low torque.

• Specifications

  Chlorine-free type

Please check the type/dimensions/specifications of the part ALP-TS-JB in the α Tapping Spray for Difficult-to-Cut Materials series.