(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Insert (For Cut-Off)
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Preferred Hand | Material Type | Sizes W (mm) | Specification Details | Material | Applicable Casing |
|---|---|---|---|---|---|---|---|---|---|---|---|
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Left Handed | AC830P | 2 | For Small Diameter / Low Resistance Type | Carbide Coating | STFH 26-2、STFH32-2、STFS L 1010-2、STFS L 2020-2、STFS L1212-2、STFS L1616-2、WCFH26-2、WCFH32-2、WCFS L 1010-2、WCFS L 1212-2、WCFS L 1616-2 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Left Handed | AC830P | 3 | For general steel | Carbide Coating | STFH 26-3、STFH32-3、STFS L 1616-3、STFS L 2525-3、STFS L2020-3、STFS L2012-3、WCFH26-3、WCFH32-3、WCFS L 1616-3、WCFS L 20-3、WCFS L 25-3 | ||
287,909 IDR | 10 Piece(s) | 12 Day(s) or more | Steel / Stainless Steel | Left Handed | AC225 | 3 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-3、STFH32-3、STFS L 1616-3、STFS L 2525-3、STFS L2020-3、STFS L2012-3、WCFH26-3、WCFH32-3、WCFS L 1616-3、WCFS L 20-3、WCFS L 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | Left Handed | G10E | 3 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-3、STFH32-3、STFS L 1616-3、STFS L 2525-3、STFS L2020-3、STFS L2012-3、WCFH26-3、WCFH32-3、WCFS L 1616-3、WCFS L 20-3、WCFS L 25-3 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Left Handed | AC1030U | 3 | For difficult-to-cut materials / low feed rates (with left/right handedness) | Coating | STFH 26-3, STFH 32-3, STFS L1616-3, STFS L2012-3, STFS L2020-3, STFS L2525-3, WCFH 26-3, WCFH 32-3, WCFS L1616-3, WCFS L20-3, WCFS L25-3 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Left Handed | AC830P | 4 | For general steel | Carbide Coating | STFH 26-4、STFH32-4、STFS L 2020-4、STFS L 2525-4、WCFH26-4、WCFH32-4、WCFS L 20-4、WCFS L 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Left Handed | AC225 | 4 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-4、STFH32-4、STFS L 2020-4、STFS L 2525-4、WCFH26-4、WCFH32-4、WCFS L 20-4、WCFS L 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Left Handed | AC1030U | 4 | For difficult-to-cut materials / low feed rates (with left/right handedness) | Coating | STFH 26-4, STFH 32-4, STFS L2020-4, STFS L2525-4, WCFH 26-4, WCFH 32-4, WCFS L20-4, WCFS L25-4 | ||
202,407 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Left Handed | AC830P | 5 | For general steel | Carbide Coating | STFH 26-5、STFH32-5、STFS L 2020-5、STFS L 2525-5、WCFH26-5、WCFH32-5、WCFS L 20-5、WCFS L 25-5 | ||
159,545 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | Left Handed | G10E | 5 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-5、STFH32-5、STFS L 2020-5、STFS L 2525-5、WCFH26-5、WCFH32-5、WCFS L 20-5、WCFS L 25-5 | ||
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC225 | 2 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-2、STFH32-2、STFS R/L 1010-2、STFS R/L 2020-2、STFS R/L1212-2、STFS R/L1616-2、WCFH26-2、WCFH32-2、WCFS R/L 1010-2、WCFS R/L 1212-2、WCFS R/L 1616-2 | ||
261,234 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | AC1030U | 2 | For difficult-to-cut materials / low feed rates | Coating | STFH 26-2, STFH 32-2, STFS R/L1010-2, STFS R/L1212-2, STFS R/L1616-2, STFS R/L2020-2, WCFH 26-2, WCFH 32-2, WCFS R/L1010-2, WCFS R/L1212-2, WCFS R/L1616-2 | ||
261,234 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 2 | General purpose | Coating | STFH 26-2, STFH 32-2, STFS R/L1010-2, STFS R/L1212-2, STFS R/L1616-2, STFS R/L2020-2, WCFH 26-2, WCFH 32-2, WCFS R/L1010-2, WCFS R/L1212-2, WCFS R/L1616-2 | ||
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 2 | For Small Diameter / Low Resistance Type | Carbide Coating | STFH 26-2、STFH32-2、STFS R/L 1010-2、STFS R/L 2020-2、STFS R/L1212-2、STFS R/L1616-2、WCFH26-2、WCFH32-2、WCFS R/L 1010-2、WCFS R/L 1212-2、WCFS R/L 1616-2 | ||
176,362 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 3 | For general steel | Carbide Coating | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | A30 | 3 | Difficult to Cut Materials / for Low Feed | Carbide alloy | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC225 | 3 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | No Preferred Hand | G10E | 3 | Difficult to Cut Materials / for Low Feed | Carbide alloy | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | T1500A | 3 | Difficult to Cut Materials / for Low Feed | Cermet | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | No Preferred Hand | G10E | 3 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-3、STFH32-3、STFS R/L 1616-3、STFS R/L 2525-3、STFS R/L2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R/L 1616-3、WCFS R/L 20-3、WCFS R/L 25-3 | ||
287,909 IDR | 10 Piece(s) | 10 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | AC1030U | 3 | For difficult-to-cut materials / low feed rates | Coating | STFH 26-3, STFH 32-3, STFS R/L1616-3, STFS R/L2012-3, STFS R/L2020-3, STFS R/L2525-3, WCFH 26-3, WCFH 32-3, WCFS R/L1616-3, WCFS R/L20-3, WCFS R/L25-3 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 3 | General purpose | Coating | STFH 26-3, STFH 32-3, STFS R/L1616-3, STFS R/L2012-3, STFS R/L2020-3, STFS R/L2525-3, WCFH 26-3, WCFH 32-3, WCFS R/L1616-3, WCFS R/L20-3, WCFS R/L25-3 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 4 | For general steel | Carbide Coating | STFH 26-4、STFH32-4、STFS R/L2020-4、STFS R/L2525-4、WCFH26-4、WCFH32-4、WCFS R/L 20-4、WCFS R/L 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC225 | 4 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-4、STFH32-4、STFS R/L2020-4、STFS R/L2525-4、WCFH26-4、WCFH32-4、WCFS R/L 20-4、WCFS R/L 25-4 | ||
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | T1500A | 4 | Difficult to Cut Materials / for Low Feed | Cermet | STFH 26-4、STFH32-4、STFS R/L2020-4、STFS R/L2525-4、WCFH26-4、WCFH32-4、WCFS R/L 20-4、WCFS R/L 25-4 | ||
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | No Preferred Hand | G10E | 4 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-4、STFH32-4、STFS R/L2020-4、STFS R/L2525-4、WCFH26-4、WCFH32-4、WCFS R/L 20-4、WCFS R/L 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | AC1030U | 4 | For difficult-to-cut materials / low feed rates | Coating | STFH 26-4, STFH 32-4, STFS R/L2020-4, STFS R/L2525-4, WCFH 26-4, WCFH 32-4, WCFS R/L20-4, WCFS R/L25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 4 | General purpose | Coating | STFH 26-4, STFH 32-4, STFS R/L2020-4, STFS R/L2525-4, WCFH 26-4, WCFH 32-4, WCFS R/L20-4, WCFS R/L25-4 | ||
202,407 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 5 | For general steel | Carbide Coating | STFH 26-5、STFH32-5、STFS R/L2020-5、STFS R/L2525-5、WCFH26-5、WCFH32-5、WCFS R/L 20-5、WCFS R/L 25-5 | ||
314,584 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC225 | 5 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-5、STFH32-5、STFS R/L2020-5、STFS R/L2525-5、WCFH26-5、WCFH32-5、WCFS R/L 20-5、WCFS R/L 25-5 | ||
159,545 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | No Preferred Hand | G10E | 5 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-5、STFH32-5、STFS R/L2020-5、STFS R/L2525-5、WCFH26-5、WCFH32-5、WCFS R/L 20-5、WCFS R/L 25-5 | ||
202,407 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | No Preferred Hand | AC1030U | 5 | For difficult-to-cut materials / low feed rates | Coating | STFH 26-5, STFH 32-5, STFS R/L2020-5, STFS R/L2525-5, WCFH 26-5, WCFH 32-5, WCFS R/L20-5, WCFS R/L25-5 | ||
202,407 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | No Preferred Hand | AC830P | 5 | General purpose | Coating | STFH 26-5, STFH 32-5, STFS R/L2020-5, STFS R/L2525-5, WCFH 26-5, WCFH 32-5, WCFS R/L20-5, WCFS R/L25-5 | ||
261,234 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC830P | 2 | For Small Diameter / Low Resistance Type | Carbide Coating | STFH 26-2、STFH32-2、STFS R 1010-2、STFS R 2020-2、STFS R 1212-2、STFS R 1616-2、WCFH26-2、WCFH32-2、WCFS R 1010-2、WCFS R 1212-2、WCFS R 1616-2 | ||
287,909 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC830P | 3 | For general steel | Carbide Coating | STFH 26-3、STFH32-3、STFS R 1616-3、STFS R 2525-3、STFS R 2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R 1616-3、WCFS R 20-3、WCFS R 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | A30 | 3 | Difficult to Cut Materials / for Low Feed | Carbide alloy | STFH 26-3、STFH32-3、STFS R 1616-3、STFS R 2525-3、STFS R 2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R 1616-3、WCFS R 20-3、WCFS R 25-3 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC225 | 3 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-3、STFH32-3、STFS R 1616-3、STFS R 2525-3、STFS R 2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R 1616-3、WCFS R 20-3、WCFS R 25-3 | ||
138,341 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | Right Handed | G10E | 3 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-3、STFH32-3、STFS R 1616-3、STFS R 2525-3、STFS R 2020-3、STFS R/L2012-3、WCFH26-3、WCFH32-3、WCFS R 1616-3、WCFS R 20-3、WCFS R 25-3 | ||
175,732 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Right Handed | AC1030U | 3 | For difficult-to-cut materials / low feed rates (with left/right handedness) | Coating | STFH 26-3, STFH 32-3, STFS R1616-3, STFS R2012-3, STFS R2020-3, STFS R2525-3, WCFH 26-3, WCFH 32-3, WCFS R1616-3, WCFS R20-3, WCFS R25-3 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC830P | 4 | For general steel | Carbide Coating | STFH 26-4、STFH32-4、STFS R 2020-4、STFS R 2525-4、WCFH26-4、WCFH32-4、WCFS R 20-4、WCFS R 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC225 | 4 | Difficult to Cut Materials / for Low Feed | Carbide Coating | STFH 26-4、STFH32-4、STFS R 2020-4、STFS R 2525-4、WCFH26-4、WCFH32-4、WCFS R 20-4、WCFS R 25-4 | ||
149,057 IDR | 10 Piece(s) | 8 Day(s) or more | Cast Iron / Non-Ferrous Metal | Right Handed | G10E | 4 | For Cast Iron/Light Alloy | Carbide alloy | STFH 26-4、STFH32-4、STFS R 2020-4、STFS R 2525-4、WCFH26-4、WCFH32-4、WCFS R 20-4、WCFS R 25-4 | ||
189,412 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Right Handed | AC1030U | 4 | For difficult-to-cut materials / low feed rates (with left/right handedness) | Coating | STFH 26-4, STFH 32-4, STFS R2020-4, STFS R2525-4, WCFH 26-4, WCFH 32-4, WCFS R20-4, WCFS R25-4 | ||
202,407 IDR | 10 Piece(s) | 8 Day(s) or more | Steel / Stainless Steel | Right Handed | AC830P | 5 | For general steel | Carbide Coating | STFH 26-5、STFH32-5、STFS R 2020-5、STFS R 2525-5、WCFH26-5、WCFH32-5、WCFS R 20-5、WCFS R 25-5 |
Loading...
Basic Information
| Shape | Others | Use | Grooving / Parting |
|---|
Specification/Dimensions
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
-
Preferred Hand
- Right Handed
- Left Handed
- No Preferred Hand
-
Material Type
-
Sizes W(mm)
-
Specification Details
- Difficult to Cut Materials / for Low Feed
- For Cast Iron/Light Alloy
- For Small Diameter / Low Resistance Type
- For difficult-to-cut materials / low feed rates
- For difficult-to-cut materials / low feed rates (with left/right handedness)
- For general steel
- General purpose
-
type
- WCF□2T
- WCF□□
- WCF□□A
- WCF□□B
Days to Ship
-
- All
- 8 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy