Socket for Electric Drills EDS-8 to EDS-24
Part Number: EDS-17

[Features]
· The hex shank is press fit for resistance to torsion and breakage (supports 7.2 V, 14.4 V, 18 V).
· The socket part is a hexagonal surface type that does not damage the corners of bolts and nuts.
· It has a deep socket design for quick fastening of double nuts and preventing nuts from falling.
· A standard type with a socket part with a depth dimension of 62 mm that supports the bolts used in construction.
· Uses carefully selected materials made in Japan.
· EDS-821AS comes with a plastic case

Specifications of EDS-17

• Specifications

  • STOCK

• Product Type

  Socket Bit (For Electric Drill)

• Opposite side dimensions(mm)

  17

• Overall Length(mm)

  105

• Shaft measurements(mm)

  6.35

• Single Item / Set Classification

  Single Item

• Socket Depth(mm)

  62

• Material

  SCM435

• Weight(g)

  115

• Socket Section Outer Diameter(mm)

  23.5

• Hexagonal Section Depth(mm)

  30

• Packing Dimensions (Height x Width)(mm)

  157×35

• Guaranteed Torque(N·m)

  75

• Features

  The socket part is of a hexagonal surface type that does not damage the corners of bolts and nuts. It has a deep socket design that considers quick fastening of double nut and falling of the nuts. The depth dimension of the socket part is 62 mm and it is a standard type compatible with construction bolts.

Please check the type/dimensions/specifications of the part EDS-17 in the Socket for Electric Drills EDS-8 to EDS-24 series.