Hanging Band Wrench (PHW)
Part Number: PHW-1013-3

For installation of hanging and standing bands

[Features]
· The socket part is a long 27 mm type with a deep pocket.
· The tip eyelet is 12 mm, and can be used for turning hanging brackets.
· The tip eyelet part has a unique shape.
· Rapid turning without falling out is possible even when released from the hand.
· The tip eyelet part is bent by 15° to make work easy from below.
· Both the body and the claw are forged for excellent strength.
· The 13 mm socket part on PHW-1013-3 can be connected to multi-sockets.
· The body has a φ40 hole for the safety cord.

Specifications of PHW-1013-3

• Specifications

  • STOCK

• Type

  Combination

• Ratchet mechanism

  Included

• Swivel (flex)

  Not Included

• Overall Length(mm)

  174

• Offset Angle(°)

  15

• Width across flat dimension(mm)

  10×13×12

• Single Product/Set Classification

  Single Item

• Socket Outer Diameter(mm)

  Small: 14/ large: 18

• Double Box End Part Dimensions(mm)

  12

• Guaranteed Torque(N·m)

  Small: 78.5, large: 94.1

• Weight(g)

  210

• Material

  Cr-V

• Specifications

  12-Sided Surface

• Features

  The socket part is a long type with a deep pocket of 27 mm. The tip box wrenches are 12 mm wide and can be used for turning the hanging brackets. The tip box wrench part can be rotated quickly without falling even if the hands are released.The tip box wrench part is bent 15° and makes it easier to work from the bottom. The main body, and even the pawls, are forged and have outstanding strength. The 13 mm socket part can be connected to multi sockets. The main body has two φ4.0 safety cord holes.

Please check the type/dimensions/specifications of the part PHW-1013-3 in the Hanging Band Wrench (PHW) series.