Ball End and L-Wrench Set Long (Standard: Metric)
Part Number: BLX6M

[Features]
· Designed so that the gap between the wrench and bolt is 0.0127 mm, very difficult to be stripped and can be used for a long time.
· The developed ball end can be continuously turned without damaging the wrench and bolt even at an angle of 25 degrees.
· There is no need to worry about the wrench falling apart with a holder having fall prevention function.
· If you turn the bolt while holding the wrench in the holder, you can apply torque with less force.
· When removing the wrench from the holder, twisting the wrench a little and the lock will be unlocked for easy removal.
· "Protanium steel alloy" Bondhus steel specially formulated for hex key achieves a strength 20% or higher than that of general steel.
[Application]
· Used for tightening hex bolts and nuts.

Specifications of BLX6M

• Type

  L-shaped Hex Wrench

• Tip Type

  Ball Point

• Width across flat dimension(mm)

  1.5 ～ 5

• Single Product/Set Classification

  Set Parts

• Material

  Protanium Special Alloy

• Set Content

  1.5, 2, 2.5, 3, 4, 5mm

• Surface Processing

  Proguard Processing

Please check the type/dimensions/specifications of the part BLX6M in the Ball End and L-Wrench Set Long (Standard: Metric) series.