(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Air Impact Wrench (360° Swing Type)

Air Impact Wrench (360° Swing Type)

Air Impact Wrench (360° Swing Type)
[Features]
Head is rotated 360degrees the position is determined for each 90degrees suitable for work in every part.
With high-tech resin body it is lightweight.
[Specification]
Usage air pressure: 0.48 to 0.68MPa
Bolt Diameter:14 to 16mm
Socket Insertion Depth:12.7mm
Total Length:264mm

  • STOCK

PDF

Part Number

Configured Part Number is shown.

SI-1650AH

Features

●Head is rotated 360degrees the position is determined for each 90degrees suitable for work in every part.
●With high-tech resin body it is lightweight.
●Left and right rotation can be switched over in one touch.

Specification

●Usage air pressure: 0.48 to 0.68MPa
●Bolt Diameter(mm):14 to 16
●Socket Insertion Depth(mm):12.7
●Maximum Tightening Torque(N/m):300
●No Load Speed(min[[Minus 1st power]]):7500
●Air Consumption(cubic meter/min):0.38
●Hose Fitting:Rc1/4
●Exhaust:Backward
●Total Length(mm):264

Warning

●Tightening torque is am aim value. Torque values change depending on the conditions.
Part Number
SI-1650AH
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

16,533,385 IDR

1 Piece(s) 1 Day(s)

Loading...

  1. 1
 

Basic Information

Maximum Tightening Torque(N▪m) 300 Socket Insertion Angle(mm) 12.7 Suitable Bolt Diameter(φ/mm) 14 to 16
Hammer Type Twin Number of Turns(rpm) 7500 Operating Air Pressure(Mpa) 0.48~0.68
Hose Fixing Port Rc1/4 Air Consumption(m³/min) 0.38 Exhaust Rear
Total Length(mm) 264 Trusco Code 292-5729 Mass(g) 2500
Advantages Head rotates 360°. Locks in every 90° to support work with a variety of components. Ultra-lightweight high-tech resin body. Clockwise/anti-clockwise rotation can be switching with one-touch. Use For tightening corners.

Please check the type/dimensions/specifications of the part SI-1650AH in the Air Impact Wrench (360° Swing Type) series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)