(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

CFLB, UT Coat 3-Flute Long Neck Ball End Mill (CFLB3030-160)

CFLB, UT Coat 3-Flute Long Neck Ball End Mill CFLB3030-160

[Features]
· Provides amazing high feed compared to the conventional 2-flute long neck ball.
· With new UTCOAT, outstanding lubricity and long life are achieved.
· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
· O.D. Tolerance: 0/-0.02

PDF

Japanese Only

Part Number

Configured Part Number is shown.

CFLB3030-160

 
Part Number
CFLB3030-160
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipR Size
(mm)
Blade length
(mm)
Overall Length (L)
(mm)
Underneck length
(mm)
Shank diameter (d)
(mm)
R Precision
(μm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

740,208 IDR

1 Piece(s) 8 Day(s) or more 1.52.460166-0.005~0.0052.7316°16.8917.3917.9318.5019.78

Loading...

  1. 1

Basic Information

Type Long Neck Bore work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Titanium Number of flutes(sheet) 3
Coating TiCN Machining Application Curved Surface / Side Surface / Carving / R-Groove Torsion Availability Available

Please check the type/dimensions/specifications of the part CFLB3030-160 in the CFLB, UT Coat 3-Flute Long Neck Ball End Mill series.

Products like this...

Part Number
CFLB3010-025
CFLB3010-030
CFLB3010-040
CFLB3030-200
CFLB3030-250
CFLB3040-120
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipR Size
(mm)
Blade length
(mm)
Overall Length (L)
(mm)
Underneck length
(mm)
Shank diameter (d)
(mm)
R Precision
(μm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

591,583 IDR

1 Piece(s) 9 Day(s) or more 0.50.8502.54-0.005~0.0050.9616°2.712.792.872.953.14

591,583 IDR

1 Piece(s) 9 Day(s) or more 0.50.85034-0.005~0.0050.9616°3.233.323.423.523.75

614,030 IDR

1 Piece(s) 9 Day(s) or more 0.50.85044-0.005~0.0050.9616°4.264.384.524.664.98

748,207 IDR

1 Piece(s) 8 Day(s) or more 1.52.470206-0.005~0.0052.7316°21.0221.6522.3323.0624.68

748,207 IDR

1 Piece(s) 9 Day(s) or more 1.52.470256-0.005~0.0052.7316°26.1726.9827.8328.75No Interference

688,609 IDR

1 Piece(s) 9 Day(s) or more 23.270126-0.007~0.0073.6316°12.9313.2913.6714.0814.99

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)