(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead (CXS4100-300)

CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead CXS4100-300

[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance

PDF

Japanese Only

Part Number

Configured Part Number is shown.

CXS4100-300

 
Part Number
CXS4100-300
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
work material Blade length (ℓ)
(mm)
Number of flutes
(sheet)
Type Coating Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Machining Application Blade tip shape Torsion Angle (θ) JAN Code Trusco Code Tool Material Standard / alteration classification Pitch
(Blades)
Corner type Helix angle Neck Gradient
(°)
Coating details Blade diameter tolerance Neck Diameter
(mm)
Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

1,153,612 IDR

1 Piece(s) 9 Day(s) or more 10General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Cast Iron[○] / Titanium[○] / Copper[◎]154Long Neck Square-107030Flat Surface / Side Surface / Groove / Inclined CuttingWith LeadStandard Helix (30 to 40°)-----------0~-0.039.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

Loading...

  1. 1

Please check the type/dimensions/specifications of the part CXS4100-300 in the CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead series.

Products like this...

Part Number
CXS4025-075
CXS4030-090
CXS4030-160
CXS4100-520
CXS4120-360
CXS4120-620
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
work material Blade length (ℓ)
(mm)
Number of flutes
(sheet)
Type Coating Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Underneck length (ℓ1)
(mm)
Machining Application Blade tip shape Torsion Angle (θ) JAN Code Trusco Code Tool Material Standard / alteration classification Pitch
(Blades)
Corner type Helix angle Neck Gradient
(°)
Coating details Blade diameter tolerance Neck Diameter
(mm)
Flute Diameter Tolerance
(mm)
Neck Diameter φd1
(mm)
Shank Taper Angle Bta
(°)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depending on Inclined Angle of Workpiece 1°30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

572,490 IDR

1 Piece(s) 10 Day(s) or more 2.5Titanium[◯] / Copper[◎] / Cast Iron[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◎] / Heat-Treated Steel[◎]3.754Long Neck Square-4507.5Inclined Cutting / Groove / Flat Surface / Side SurfaceWith LeadStandard Helix (30 to 40°)-----------0~-0.022.4416°7.798.048.318.609.25

654,295 IDR

1 Piece(s) 9 Day(s) or more 3Titanium[◯] / Copper[◎] / Cast Iron[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◎] / Heat-Treated Steel[◎]4.54Long Neck Square-6509Inclined Cutting / Groove / Flat Surface / Side SurfaceWith LeadStandard Helix (30 to 40°)-----------0~-0.022.9516°9.349.649.9710.3111.09

975,385 IDR

1 Piece(s) 12 Day(s) 3Titanium[◯] / Copper[◯] / Cast Iron[◯] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◯] / Heat-Treated Steel[◯]4.5--For General Steel (AlCrN etc.)67016Groove / Side Surface-[IKOU] 37 to 404560295088337698-5700CarbideManufacturer standard product4StandardUnequal lead / unequal division16UT coat-0.02 to 02.95--------

1,672,308 IDR

1 Piece(s) 12 Day(s) 10Titanium[◯] / Copper[◯] / Cast Iron[◯] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◯] / Heat-Treated Steel[◯]15--For General Steel (AlCrN etc.)1010052Groove / Side Surface-[IKOU] 37 to 404560295088382698-5751CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.03 to 09.82--------

1,632,200 IDR

1 Piece(s) 9 Day(s) or more 12Titanium[◯] / Copper[◎] / Cast Iron[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◎] / Heat-Treated Steel[◎]184Long Neck Square-129036Inclined Cutting / Groove / Flat Surface / Side SurfaceWith LeadStandard Helix (30 to 40°)-----------0~-0.0311.82-No interferenceNo interferenceNo interferenceNo interferenceNo interference

2,341,538 IDR

1 Piece(s) 12 Day(s) 12Titanium[◯] / Copper[◯] / Cast Iron[◯] / Stainless Steel[◯] / High-Hardness Steel ~ HRC55[◯] / General Steel[◯] / Heat-Treated Steel[◯]18--For General Steel (AlCrN etc.)1211062Groove / Side Surface-[IKOU] 37 to 404560295088399698-5769CarbideManufacturer standard product4StandardUnequal lead / unequal division-UT coat-0.03 to 011.82--------

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)