(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

KTD, Cobalt High-Speed Steel Taper Drill Bit

KTD, Cobalt High-Speed Steel Taper Drill Bit

Taper shank drill bit (high speed steel) ideal for drilling difficult-to-cut materials.
[Features]
· The M.T.No. of ø12.1 to ø14, ø20.1 to ø23, and ø27.5 to ø32 is thicker than the standard to increase the rigidity of the tool during heavy cutting.
[Application]
· Ideal for drilling difficult-to-cut materials.

Part Number

Configured Part Number is shown.

KTDD1500M2

Dimensions
 

Recommended cutting conditions

  • These cutting conditions are based on the manufacturer's recommended conditions and describe the rotation speed, feed rate, and depth of cut for each work material (general steel, alloy steel, tempered steel, hardened steel, stainless steel, aluminum, cast iron, etc.). Thing.
  • Optimum machining conditions change depending on the machining environment (machine tools, tooling, etc.), so please check the machining conditions (machined surface, chatter, etc.) and make corrections before using.
KTD Cobalt High Taper Drill Recommended Cutting Conditions Table
Part Number
KTDD1500M2
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

2,187,846 IDR

1 Piece(s) 1 Day(s)

Loading...

  1. 1

Basic Information

Hole diameter (drill diameter) D(mm) 15 LCF(mm) 128.7 work material General Steel / Stainless Steel / Cast Iron / Aluminum
Tool Material Type Cobalt High-Speed Steel LF(mm) 225 Shank Type Tapered Link
Coating Y/N None With/without Oil Hole None OAL(mm) 228.7
Point Angle(°) 128° M.T.No.(No.) M2

Please check the type/dimensions/specifications of the part KTDD1500M2 in the KTD, Cobalt High-Speed Steel Taper Drill Bit series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)