Conductivity Colored Mat Gray
Part Number: F-712

An anti-static mat to be spread mainly on work benches and shelf boards in EPA (static electricity protection area) to prevent static.
[Features]
· NBR (rubber) is used for the material, and there is almost no effect even if the melted solder drops during the soldering work.
· The surface is finely textured, which makes the work piece less slippery and enables stable work.
· The glare caused by the illumination reflection is reduced since the surface is not glossy and has little reflection.
· Can be easily separated with a cutter, etc. The product is generally cut and used according to the size of each work bench or shelf board.
· Integrates a conductive rubber mat (black) and a color layer for antistatic measures.
· A conductive mat with low cost by removing reinforcing fibers.
[Application]
· Convenient as a work bench for assembly lines, storage racks and work desk mats for office equipment.

Specifications of F-712

• Thickness(mm)

  2

• Width(mm)

  1000

• Product Type

  Antistatic Countermeasures - Mat

• Length(m)

  1

• Color

  Gray

• Mass(g)

  3500

• ESD Control Value(Ω)

  Resistance between points Rp≤1X10⁸

• Supplementary explanation

  The cost is reduced by removing the reinforcing fibers

Please check the type/dimensions/specifications of the part F-712 in the Conductivity Colored Mat Gray series.