(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping
68.800 Stock items for Same Day Shipping
8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama
68.800 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Magnetic valve, VUVG Series【1-10 Pieces Per Package】 (Part Numbers)
- Solenoid valves VUVG series from FESTO.
- Can be set to internal or external pilot air supply for manifold assemblies with sub-base valves.
- The maximum pressure is 10 bar.
- Compact universal valve
- Connection technology via electrical connection box (E-box)
- High flow rate relative to its size
- In-line valves can be used as individual valves or manifold valves
- Perfect for allhigh-speed applications requiring a particularly high flow rate combined witha compact size, e.g. in small parts assembly and the electronics industry or inthe food and packaging industry.
Magnetic valve, VUVG Series
VUVG-LK10, in-line valves M5
Specifications
| Valve function | T32-A | M52-A | B52 |
|---|---|---|---|
| Normal position | C | - | - |
| Stable position | Monostable | Bistable | |
| Reset method: pneumatic spring | Yes | Yes | - |
| Design | Piston spool | ||
| Sealing principle | Soft | ||
| Actuation type | Electric | ||
| Type of control | Piloted | ||
| Pilot air supply | Internal | ||
| Exhaust air function | Can be throttled | ||
| Manual override | Detenting, non-detenting | ||
| Type of mounting | Optionally via through-holes or on manifold rail | ||
| Mounting position | Any | ||
| Standard nominal flow rate [l/min] | 180 | 195 | 195 |
| Switching time on/off [ms] | 12/14 | 14/17 | - |
| Switching time changeover [ms] | - | 7 | |
| Size [mm] | 10 | ||
| Port 2, 4 | M5 | ||
| Product weight [g] | 55 | 45 | 57 |
| Corrosion resistance class CRC | 2 | ||
VUVG-LK10, in-line valves M7
Specifications
| Valve function | T32-A | M52-A | B52 |
|---|---|---|---|
| Normal position | C | - | - |
| Stable position | Monostable | Bistable | |
| Reset method: pneumatic spring | Yes | Yes | - |
| Design | Piston spool | ||
| Sealing principle | Soft | ||
| Actuation type | Electric | ||
| Type of control | Piloted | ||
| Pilot air supply | Internal | ||
| Exhaust air function | Can be throttled | ||
| Manual override | Detenting, non-detenting | ||
| Type of mounting | Optionally via through-holes or on manifold rail | ||
| Mounting position | Any | ||
| Standard nominal flow rate [l/min] | 280 | 340 | 340 |
| Switching time on/off [ms] | 12/14 | 14/17 | - |
| Switching time changeover [ms] | - | 7 | |
| Size [mm] | 10 | ||
| Port 2, 4 | M 7 | ||
| Product weight [g] | 55 | 45 | 57 |
| Corrosion resistance class CRC | 2 | ||
VUVG-L10 and VUVG-S10, in-line valves M5
Specifications
| Valve function | T32-A | T32-M | M52-R | B52 | M52-M | P53 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal position | C | U | H | C | U | H | - | - | - | C | U | E | |
| Stable position | Monostable | Bistable | Monostable | Monostable | |||||||||
| Reset method: pneumatic spring | Yes | No | Yes | - | No | - | |||||||
| Reset method: mechanical spring | No | Yes | Yes | - | Yes | Yes | |||||||
| Vacuum operation at port 1 | No | Only with external pilot air supply | |||||||||||
| Design | Piston spool | ||||||||||||
| Sealing principle | Soft | ||||||||||||
| Actuation type | Electric | ||||||||||||
| Type of control | Piloted | ||||||||||||
| Pilot air supply | Internal or external | ||||||||||||
| Exhaust air function | Can be throttled | ||||||||||||
| Manual override | Choice of non-detenting, covered, non-detenting/detenting or detenting | ||||||||||||
| Type of mounting | Optionally via through-holes or on manifold rail | ||||||||||||
| Mounting position | Any | ||||||||||||
| Nominal size [mm] | 2.7 | 1.9 | 1.8 | 3.2 | 2.2 | 3.2 | |||||||
| Standard nominal flow rate [l/min] | 150 | 135 | 125 | 125 | 220 | 190 | 210 | ||||||
| Flow rate on manifold rail [l/min] | 150 | 135 | 125 | 125 | 220 | 190 | 210 | ||||||
| Switching time on/off [ms] | 6/16 | 8/11 | 7/19 | - | 8/24 | 10/30 | |||||||
| Switching time changeover [ms] | - | 7 | - | 15 | |||||||||
| Size [mm] | 10 | ||||||||||||
| Port | 1, 2, 3, 4, 5 | M5 | |||||||||||
| 12/14 | M3 | ||||||||||||
| Product weight [g] | 55 | 54 | 45 | 55 | 44 | 55 | |||||||
| Certification | c UL us - Recognized (OL) | ||||||||||||
| c CSA us (OL) | |||||||||||||
| RCM | |||||||||||||
| CE marking | To EU EMC Directive | ||||||||||||
| Corrosion resistance class CRC | 2 | ||||||||||||
VUVG-L10 and VUVG-S10, in-line valves M7
Specifications
| Valve function | T32-A | T32-M | M52-R | B52 | M52-M | P53 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal position | C | U | H | C | U | H | - | - | - | C | U | E | |
| Stable position | Monostable | Bistable | Monostable | Monostable | |||||||||
| Reset method: pneumatic spring | Yes | No | Yes | - | No | - | |||||||
| Reset method: mechanical spring | No | Yes | Yes | - | Yes | Yes | |||||||
| Vacuum operation at port 1 | No | Only with external pilot air supply | |||||||||||
| Design | Piston spool | ||||||||||||
| Sealing principle | Soft | ||||||||||||
| Actuation type | Electric | ||||||||||||
| Type of control | Piloted | ||||||||||||
| Pilot air supply | Internal or external | ||||||||||||
| Exhaust air function | Can be throttled | ||||||||||||
| Manual override | Choice of non-detenting, covered, non-detenting/detenting or detenting | ||||||||||||
| Type of mounting | Optionally via through-holes or on manifold rail | ||||||||||||
| Mounting position | Any | ||||||||||||
| Nominal size [mm] | 2.7 | 2.0 | 1.9 | 1.9 | 4.0 | 2.8 | 3.5 | ||||||
| Standard nominal flow rate [l/min] | 190 | 150 | 140 | 140 | 330 | 380 | 220 | 320 | |||||
| Flow rate on manifold rail [l/min] | 170 | 140 | 130 | 130 | 330 | 340 | 220 | 300 | |||||
| Switching time on/off [ms] | 6/16 | 8/11 | 7/19 | - | 8/24 | 10/30 | |||||||
| Switching time changeover [ms] | - | 7 | - | 15 | |||||||||
| Size [mm] | 10 | ||||||||||||
| Port | 1, 2, 3, 4, 5 | M7 | |||||||||||
| 12/14 | M3 | ||||||||||||
| Product weight [g] | 55 | 54 | 45 | 55 | 44 | 55 | |||||||
| Certification | c UL us - Recognized (OL) | ||||||||||||
| c CSA us (OL) | |||||||||||||
| RCM | |||||||||||||
| CE marking | To EU EMC Directive | ||||||||||||
| Corrosion resistance class CRC | 2 | ||||||||||||
VUVG-LK14, in-line valves G1/8
Specifications
| Valve function | T32-A | M52-A | B52 |
|---|---|---|---|
| Normal position | C | - | - |
| Stable position | Monostable | Bistable | |
| Reset method: pneumatic spring | Yes | Yes | - |
| Design | Piston spool | ||
| Sealing principle | Soft | ||
| Actuation type | Electric | ||
| Type of control | Piloted | ||
| Pilot air supply | Internal | ||
| Exhaust air function | Can be throttled | ||
| Manual override | Non-detenting, detenting | ||
| Type of mounting | Optionally via through-holes or on manifold rail | ||
| Mounting position | Any | ||
| Standard nominal flow rate [l/min] | 570 | 660 | 660 |
| Switching time on/off [ms] | 13/20 | 14/24 | - |
| Switching time changeover [ms] | - | 8 | |
| Size [mm] | 14 | ||
| Port 2, 4 | G1/8 | ||
| Product weight [g] | 75 | 65 | 85 |
| Corrosion resistance class CRC | 2 | ||
VUVG-L14 and VUVG-S14, in-line valves G1/8
Specifications
| Valve function | T32-A | T32-M | M52-A | B52 | M52-M | P53 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal position | C | U | H | C | U | H | - | - | - | C | U | E | |
| Stable position | Monostable | Bistable | Monostable | ||||||||||
| Reset method: pneumatic spring | Yes | No | Yes | - | No | - | |||||||
| Reset method: mechanical spring | No | Yes | No | - | Yes | Yes | |||||||
| Vacuum operation at port 1 | No | Only with external pilot air supply | |||||||||||
| Size [mm] | 14 | ||||||||||||
| Design | Piston spool | ||||||||||||
| Sealing principle | Soft | ||||||||||||
| Actuation type | Electric | ||||||||||||
| Type of control | Piloted | ||||||||||||
| Pilot air supply | Internal or external | ||||||||||||
| Exhaust air function | Can be throttled | ||||||||||||
| Manual override | Choice of non-detenting, covered, non-detenting/detenting or detenting | ||||||||||||
| Type of mounting | Optionally via through-holes or on manifold rail | ||||||||||||
| Mounting position | Any | ||||||||||||
| Nominal size [mm] | 4.6 | 4.3 | 5.6 | 5.6 | 5.6 | 5.6 | |||||||
| Standard nominal flow rate [l/min] | 560 | 600 | 590 | 550 | 500 | 500 | 780 | 780 | 780 | 650 | 560 | ||
| Flow rate on manifold rail [l/min] | 560 | 580 | 520 | 480 | 480 | 680 | 700 | 700 | 620 | 560 | |||
| Switching time [ms] | On/off | 8/23 | 15/11 | 14/22 | - | 13/40 | 12/40 | ||||||
| Changeover | - | 8 | - | 20 | |||||||||
| Pneumatic connection | 1, 2, 3, 4, 5 | G1/8 | |||||||||||
| 12/14 | M5 | ||||||||||||
VUVG-L18 and VUVG-S18, in-line valves G1/4
Specifications
| Valve function | T32-A | T32-M | M52-R | B52 | M52-M | P53 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal position | C | U | H | C | U | H | - | - | - | C | U | E | |
| Stable position | Monostable | Bistable | Monostable | ||||||||||
| Reset method: pneumatic spring | Yes | No | Yes | - | No | - | |||||||
| Reset method: mechanical spring | No | Yes | Yes | - | Yes | Yes | |||||||
| Vacuum operation at port 1 | No | Only with external pilot air supply | |||||||||||
| Size [mm] | 18 | ||||||||||||
| Design | Piston spool | ||||||||||||
| Sealing principle | Soft | ||||||||||||
| Actuation type | Electric | ||||||||||||
| Type of control | Piloted | ||||||||||||
| Pilot air supply | Internal/external | ||||||||||||
| Exhaust air function | Can be throttled | ||||||||||||
| Manual override | Choice of non-detenting, covered, non-detenting/detenting or detenting | ||||||||||||
| Type of mounting | Optionally via through-holes or on manifold rail | ||||||||||||
| Mounting position | Any | ||||||||||||
| Nominal size [mm] | 5.7 | 6.9 | 7.3 | 6.9 | 6.5 | 6.3 | |||||||
| Standard nominal flow rate [l/min] | 880 | 970 | 950 | 870 | 990 | 920 | 1300 | 1380 | 1300 | 1200 | 1000 | 910 | |
| Flow rate on manifold rail | 780 | 980 | 820 | 780 | 960 | 820 | 1300 | 1370 | 1300 | 1180 | 1220 | 1050 | |
| Switching time [ms] | On/off | 13/25 | 15/22 | 15/31 | - | 10/45 | 15/48 | ||||||
| Changeover | - | - | - | 11 | - | 29 | |||||||
| Pneumatic connection | 1, 2, 3, 4, 5 | G1/4 | |||||||||||
| 12/14 | M5 | ||||||||||||
| Product weight [g] | 164 | 164 | 154 | 164 | 154 | 160 | |||||||
| Certification | c UL us - Recognized (OL) | ||||||||||||
| c CSA us (OL) | |||||||||||||
| RCM | |||||||||||||
| CE marking (see declaration of conformity) | To EU EMC Directive | ||||||||||||
| Corrosion resistance class CRC | 2 | ||||||||||||
VUVG-BK10, sub-base valves M5/M7
Specifications
| Valve function | T32-A | M52-A | B52 |
|---|---|---|---|
| Normal position | C | - | - |
| Stable position | Monostable | Bistable | |
| Reset method: pneumatic spring | Yes | Yes | - |
| Design | Piston spool | ||
| Sealing principle | Soft | ||
| Actuation type | Electric | ||
| Type of control | Piloted | ||
| Pilot air supply | Internal | ||
| Exhaust air function | Can be throttled | ||
| Manual override | Non-detenting, detenting | ||
| Type of mounting | On manifold rail | ||
| Mounting position | Any | ||
| Standard nominal flow rate [l/min] | 160 | 160 | 160 |
| Switching time on/off [ms] | 12/14 | 14/17 | - |
| Switching time changeover [ms] | - | 7 | |
| Size [mm] | 10 | ||
| Port 2, 4 | M5/M7 in manifold rail | ||
| Product weight [g] | 55 | 45 | 57 |
| Corrosion resistance class CRC | 2 | ||
VUVG-BK14, sub-base valves G1/8
Specifications
| Valve function | T32-A | M52-A | B52 |
|---|---|---|---|
| Normal position | C | - | - |
| Stable position | Monostable | Bistable | |
| Reset method: pneumatic spring | Yes | Yes | - |
| Design | Piston spool | ||
| Sealing principle | Soft | ||
| Actuation type | Electric | ||
| Type of control | Piloted | ||
| Pilot air supply | Internal | ||
| Exhaust air function | Can be throttled | ||
| Manual override | Non-detenting, detenting | ||
| Type of mounting | On manifold rail | ||
| Mounting position | Any | ||
| Standard nominal flow rate [l/min] | 350 | 380 | 380 |
| Switching time on/off [ms] | 13/20 | 14/24 | - |
| Switching time changeover [ms] | - | 8 | |
| Size [mm] | 14 | ||
| Port 2, 4 | G1/8 in manifold rail | ||
| Product weight [g] | 75 | 65 | 85 |
| Corrosion resistance class CRC | 2 | ||
VUVG-B14, sub-base valves G1/8
Specifications
| Valve function | T32-A | T32-M | M52-A | B52 | M52-M | P53 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Normal position | C | U | H | C | U | H | - | - | - | C | U | E | |
| Stable position | Monostable | Bistable | Monostable | Monostable | |||||||||
| Reset method: pneumatic spring | Yes | No | Yes | - | No | - | |||||||
| Reset method: mechanical spring | No | Yes | No | - | Yes | Yes | |||||||
| Vacuum operation at port 1 | No | Only with external pilot air supply | |||||||||||
| Size | 14 | ||||||||||||
| Design | Piston spool | ||||||||||||
| Sealing principle | Soft | ||||||||||||
| Actuation type | Electric | ||||||||||||
| Type of control | Piloted | ||||||||||||
| Pilot air supply | External, internal; can be selected via sub-base | ||||||||||||
| Exhaust air function | Can be throttled | ||||||||||||
| Manual override | Choice of non-detenting, covered, non-detenting/detenting or detenting | ||||||||||||
| Type of mounting | On manifold rail | ||||||||||||
| Mounting position | Any | ||||||||||||
| Nominal size | 4.6 | 4.3 | 5.6 | ||||||||||
| Standard nominal flow rate | 600 | 580 | 470 | 450 | 630 | 680 | 600 | 580 | 580 | ||||
| Flow rate on manifold rail G1/8 | 510 | 430 | 410 | 520 | 570 | 520 | 500 | 460 | |||||
| Switching time | On/off | 8/23 | 15/11 | 14/22 | - | 13/40 | 12/40 | ||||||
| Changeover | - | 8 | - | 20 | |||||||||
| Pneumatic connection | 1, 3, 5 | G1/4 in manifold rail | |||||||||||
| 2, 4 | G1/8 in manifold rail | ||||||||||||
| 12/14, 82/84 | M5 in manifold rail | ||||||||||||
| Product weight | 89 | 80 | 78 | 89 | 70 | 89 | |||||||
| Certification | c UL us - Recognized (OL) | ||||||||||||
| c CSA us (OL) | |||||||||||||
| RCM | |||||||||||||
| CE marking (see declaration of conformity) | To EU EMC Directive | ||||||||||||
| to EU Low Voltage Directive | |||||||||||||
| Corrosion resistance class CRC | 2 | ||||||||||||
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Housing material | Seals material | Pneumatic connection 1 | Pneumatic connection 2 | Pneumatic connection 3 | Pneumatic connection 4 | Pneumatic connection 5 | Pneumatic working port | Pilot air port 12/14 | Degree of protection | Max. switching frequency (Hz) | Valve function | Lap | Width (mm) | Nominal width (mm) | Standard nominal flow rate (l/min) | Pilot air supply port | Flow direction | Changeover time (ms) | Reset method | Switching time off (ms) | Switching time on (ms) | Valve size (mm) | Operating voltage (V) | Min. Operating pressure (bar) | Max. Operating pressure (bar) | Min. Pilot pressure (bar) | Max. Pilot pressure (bar) | Min. Temperature of medium (°C) | Max. Temperature of medium (°C) | Min. Ambient temperature (°C) | Max. Ambient temperature (°C) | Suitability for vacuum | Max. positive test pulse with 0 signal (µs) | Max. negative test pulse on 1 signal (µs) | Operating medium | Pilot medium | Corrosion resistance class (CRC) | Electrical connection | Manual override | Mounting Type | Actuation type | Assembly position | Authorization | Coil characteristics | Duty cycle | Exhaust air function | Information on operating and pilot media | LABS (PWIS) conformity | Max. negative test pulse with logic 1 (µs) | Max. positive test pulse with logic 0 (µs) | Mounting position | Nominal size | Note on materials | Note on operating and pilot medium | Overlap | PWIS conformity | Restricted ambient and media temperature | Sealing principle | Shock resistance | Signal status display | Structural design | Switching time reversal (ms) | Type of actuation | Type of control | Type of piloting | Vibration resistance | Manufacturer part # | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2,389,286 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | M7 | - | M7 | - | M7 | - | IP67, IP65 | 3 | 2x3/2, open/closed, monostable | Overlap | - | - | 140 | External | Reversible | - | Mechanical spring | 20 | 10 | 10 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573403 | 59 | ||
2,157,851 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | M5 | - | M5 | - | M5 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 150 | External | - | - | Pneumatic spring | 20 | 8 | 10 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573387 | 59 | ||
2,244,544 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | M7 | - | M7 | - | M7 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 160 | External | - | - | Pneumatic spring | 20 | 8 | 10 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573399 | 59 | ||
2,302,340 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | M5 | - | M5 | - | M5 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 130 | External | Reversible | - | Mechanical spring | 20 | 10 | 10 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573390 | 59 | ||
2,389,286 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | M7 | - | M7 | - | M7 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 140 | External | Reversible | - | Mechanical spring | 20 | 10 | 10 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573402 | 59 | ||
2,215,391 IDR | 1 Piece(s) | 20 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
1,694,212 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminium alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 5/2, monostable | Overlap | - | - | 620 | External | Reversible | - | Pneumatic spring | 26 | 13 | 14 | 24 DC | -0.9 | 10 | 2.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573470 | 91 | ||
1,766,584 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 5/2, monostable | Overlap | - | - | 620 | External | Reversible | - | Mechanical spring | 38 | 10 | 14 | 24 DC | -0.9 | 8 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573471 | 89 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminium alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 5/3, closed | Overlap | - | - | 590 | External | Reversible | 25 | Mechanical spring | 42 | 15 | 14 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573473 | 95 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 5/3, exhausted | Overlap | - | - | 590 | External | Reversible | 25 | Mechanical spring | 42 | 15 | 14 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573474 | 95 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 5/3, pressurized | Overlap | - | - | 590 | External | Reversible | 25 | Mechanical spring | 42 | 15 | 14 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573475 | 95 | ||
2,331,492 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminium alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, closed, monostable | Overlap | - | - | 610 | External | - | - | Pneumatic spring | 29 | 10 | 14 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573464 | 102 | ||
2,475,981 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminium alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, closed, monostable | Overlap | - | - | 520 | External | Reversible | - | Mechanical spring | 21 | 13 | 14 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573467 | 100 | ||
2,331,492 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, open/closed, monostable | Overlap | - | - | 610 | External | - | - | Pneumatic spring | 29 | 10 | 14 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573466 | 102 | ||
2,475,981 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, open/closed, monostable | Overlap | - | - | 520 | External | Reversible | - | Mechanical spring | 21 | 13 | 14 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573469 | 100 | ||
2,331,492 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 610 | External | - | - | Pneumatic spring | 29 | 10 | 14 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573465 | 102 | ||
2,475,981 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/8 | - | G1/8 | - | G1/8 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 520 | External | Reversible | - | Mechanical spring | 21 | 13 | 14 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 573468 | 100 | ||
2,302,340 IDR | 1 Piece(s) | 20 Day(s) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
1,853,788 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 5/2, monostable | Indefinite overlap | - | - | 1150 | External | Reversible | - | Mechanical spring | 40 | 10 | 18 | 24 DC | -0.9 | 8 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004880 | 138 | ||
1,781,160 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 5/2, monostable | Indefinite overlap | - | - | 1150 | External | Reversible | - | Pneumatic spring Mechanical spring | 30 | 15 | 18 | 24 DC | -0.9 | 10 | 2.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004879 | 138 | ||
2,650,132 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 5/3, closed | Overlap | - | - | 900 | External | Reversible | 31 | Mechanical spring | 57 | 17 | 18 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004882 | 140 | ||
2,650,132 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 5/3, exhausted | Indefinite overlap | - | - | 900 | External | Reversible | 31 | Mechanical spring | 57 | 17 | 18 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004883 | 140 | ||
2,650,132 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 5/3, pressurized | Indefinite overlap | - | - | 900 | External | Reversible | 31 | Mechanical spring | 57 | 17 | 18 | 24 DC | -0.9 | 10 | 3 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004884 | 140 | ||
2,418,440 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, closed, monostable | Overlap | - | - | 900 | External | - | - | Pneumatic spring | 34 | 15 | 18 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004873 | 145 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, closed, monostable | Overlap | - | - | 900 | External | Reversible | - | Mechanical spring | 25 | 15 | 18 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004876 | 147 | ||
2,418,440 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, open/closed, monostable | Overlap | - | - | 900 | External | - | - | Pneumatic spring | 34 | 15 | 18 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004875 | 145 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, open/closed, monostable | Overlap | - | - | 900 | External | Reversible | - | Mechanical spring | 25 | 15 | 18 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004878 | 147 | ||
2,418,440 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 900 | External | - | - | Pneumatic spring | 34 | 15 | 18 | 24 DC | 1.5 | 10 | 1.5 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004874 | 145 | ||
2,563,184 IDR | 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy | NBR, HNBR | - | G1/4 | - | G1/4 | - | G1/4 | - | IP67, IP65 | 3 | 2x3/2, open, monostable | Overlap | - | - | 900 | External | Reversible | - | Mechanical spring | 25 | 15 | 18 | 24 DC | -0.9 | 10 | 2 | 8 | -5 | 60 | -5 | 60 | - | 1600 | 3000 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8004877 | 147 |
Loading...
Specification/Dimensions
-
Housing material
- PA
- Wrought aluminium alloy
- Wrought aluminum alloy
-
Seals material
- HNBR, NBR
- NBR, HNBR
-
Pneumatic connection 1
-
Pneumatic connection 2
- G1/4
- G1/8
- M3
- M5
- M7
- Flange
-
Pneumatic connection 3
-
Pneumatic connection 4
-
Pneumatic connection 5
-
Pneumatic working port
-
Pilot air port 12/14
-
Degree of protection
-
Max. switching frequency(Hz)
-
Valve function
-
Lap
- Indefinite overlap
- Overlap
- Positive overlap
-
Width(mm)
-
Nominal width(mm)
- 1.4
- 1.7
- 1.8
- 1.9
- 2
- 2.2
- 2.3
- 2.7
- 2.8
- 3.2
- 3.5
- 4
- 4.3
- 4.6
- 5.6
- 5.7
- 6.3
- 6.5
- 6.9
- 7.3
-
Standard nominal flow rate(l/min)
- 80
- 90
- 100
- 125
- 130
- 135
- 140
- 150
- 150 ... 170
-
150 ...
170 - 160
- 170
- 170-190
- 170 ... 190
-
170 ...
190 - 180
- 190
- 195
- 200 ... 300
-
200 ...
300 - 210
-
210 ...
330 - 220
- 230
- 280
- 300-320
- 300 ... 320
-
300 ...
320 - 320
- 330
- 340
- 340-380
-
340 ...
380 - 350
- 380
-
410 ...
450 -
430 ...
470 - 440
-
460 ...
600 - 470
-
480 ...
500 - 490
- 500
-
500 ...
600 - 510
-
510 ...
580 -
510 ...
600 - 510 ... 600
- 520
- 520-630
-
520 ...
550 - 520 ... 600
-
520 ...
600 -
520 ...
630 - 560
- 570
-
570 ...
680 -
580 ...
590 -
580 ...
600 - 590
- 610
- 620
- 620-650
-
620 ...
650 - 660
- 680-730
-
680 ...
730 - 700-780
-
700 ...
780 - 750
- 770
- 790
- 800
- 870
- 880
- 900
- 910
- 920
- 950
- 970
- 990
- 1000
- 1150
- 1200
- 1300
- 1380
-
Pilot air supply port
- External
- Internal
-
Flow direction
- Non-reversible
- Reversible
-
Changeover time(ms)
-
Reset method
- Air spring
- Mechanical spring
-
Mechanical spring
Pneumatic spring - Pneumatic spring
-
Pneumatic spring
Mechanical spring
-
Switching time off(ms)
-
Switching time on(ms)
-
Valve size(mm)
-
Operating voltage(V)
-
Min. Operating pressure(bar)
-
Max. Operating pressure(bar)
-
Min. Pilot pressure(bar)
-
Max. Pilot pressure(bar)
- 8
-
Min. Temperature of medium(°C)
- -5
-
Max. Temperature of medium(°C)
- 50
- 60
-
Min. Ambient temperature(°C)
- -5
-
Max. Ambient temperature(°C)
- 50
- 60
-
Suitability for vacuum
- No
- Yes
-
Max. positive test pulse with 0 signal(µs)
- 700
- 1600
-
Max. negative test pulse on 1 signal(µs)
- 900
- 3000
-
Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Compressed air in accordance with ISO8573-1:2010 [7:4:4]
- Compressed air to ISO 8573-1:2010 [7:4:4]
-
Pilot medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Compressed air in accordance with ISO8573-1:2010 [7:4:4]
- Compressed air to ISO 8573-1:2010 [7:4:4]
-
Corrosion resistance class (CRC)
-
Electrical connection
-
Manual override
- Detenting Non-detenting
- Detenting Non-detenting Covered
- Detenting Pushing Covered
- Detenting, Non-detenting
- Non-detenting, Detenting
-
Mounting Type
-
Actuation type
- Electrical
-
Assembly position
- Any
-
Authorization
- RCM Mark c UL us - Recognized (OL)
- RCM trademark c UL us - Recognized (OL)
- c UL us - Recognized (OL)
-
Coil characteristics
- 22 V DC: 1.0 W
- 24 V DC: 1 W
-
Duty cycle
- 100
-
Exhaust air function
- With flow control option
- throttleable
-
Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
-
LABS (PWIS) conformity
- VDMA24364-B1/B2-L
- VDMA24364-B2-L
-
Max. negative test pulse with logic 1(µs)
- 900
-
Max. positive test pulse with logic 0(µs)
- 700
-
Mounting position
- Any
- optional
-
Nominal size
- 2.7 mm
- 3.5 mm
- 4 mm
- 4.6 mm
- 5.6 mm
- 6.5 mm
-
Note on materials
- RoHS-compliant
-
Note on operating and pilot medium
- Lubricated operation possible (in which case lubricated operation will always be required)
- Lubricated operation possible (subsequently required for further operation)
-
Overlap
- Positive overlap
-
PWIS conformity
- VDMA24364-B1/B2-L
-
Restricted ambient and media temperature
- Without holding current reduction -5 - 50 °C
-
Sealing principle
- Hard
- Soft
-
Shock resistance
- Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Shock test with severity level 2 in accordance with FN 942017-5 and EN 60068-2-27
-
Signal status display
- LED
-
Structural design
- Piston gate valve
- Piston slide
-
Switching time reversal(ms)
- 14
- 20
- 29
-
Type of actuation
- Electric
-
Type of control
- Pilot-controlled
-
Type of piloting
- Piloted
-
Vibration resistance
- Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6
- Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Days to Ship
-
- All
- 4 Day(s) or Less
- 15 Day(s) or Less
- 20 Day(s) or Less
- 25 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy