(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 24/11/2024 sampai dengan 6:00 pada tanggal 25/11/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (WIB) 25/11/2024. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Lubricator AL10-A to AL60-A Series
- On Sale Till 31/12/2024
[Features]
· Improved visibility and environmental resistance.
& nbsp Bowl is completely covered by a transparent bowl guard.
(i)Caution
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Configured Part Number is shown.
Lubricator Series AL10-A To AL60-A Specifications
AL10-A to AL60-A Series JIS symbol
| Model | AL10-A | AL20-A | AL30-A | AL40-A | AL40-06-A | AL50-A | AL60-A |
|---|---|---|---|---|---|---|---|
| Piping connection port diameter | M5 × 0.8 | 1/8, 1/4 | 1/4, 3/8 | 1/4, 3/8, 1/2 | 3/4 | 3/4, 1 | 1 |
| Applicable fluids | Air | ||||||
| Ambient temperature and working fluid temperature | -5 to +60°C (no freezing) | ||||||
| Proof pressure | 1.5 MPa | ||||||
| Maximum operating pressure | 1.0 MPa | ||||||
| Minimum dripping flow rate [L/min (ANR)]Note) | 4 | 15 | 1/4: 30 3/8: 40 | 1/4: 30 3/8: 40 1/2: 50 | 50 | 190 | 220 |
| Oil capacity (cm3) | 7 | 25 | 55 | 135 | |||
| Recommended lubricant | Type 1 turbine oil (ISO VG32) | ||||||
| Bowl material | Polycarbonate | ||||||
| Bowl guard | - | Semi-standard (steel) | Standard equipment (polycarbonate) | ||||
| Weight (kg) | 0.07 | 0.10 | 0.20 | 0.38 | 0.43 | 0.94 | 1.09 |
Outline dimensional drawing
AL10-A dimensional drawing
AL20-A dimensional drawing
AL30-A to AL40-06-A dimensional drawing
AL50-A, AL60-A dimensional drawing
(Unit: mm)
| Model | Standard specifications | Optional specifications | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bracket mounting dimensions | ||||||||||||||||
| P | A | B | C | D | E | G | J | M | N | Q | R | S | T | U | V | |
| AL10-A | M5 × 0.8 | 25 | 51.5 | 25.5 | 12.5 | - | 35 | 12.5 | - | - | - | - | - | - | - | - |
| AL20-A | 1/8, 1/4 | 40 | 79.3 | 35.9 | 20 | - | 60 | 20 | 30 | 27 | 22 | 5.4 | 8.4 | 40 | 2.3 | 28 |
| AL30-A | 1/4, 3/8 | 53 | 104.1 | 38.1 | 26.7 | 30 | 80 | 26.7 | 41 | 35 | 23 | 6.5 | 13 | 53 | 2.3 | 30 |
| AL40-A | 1/4 / 3/8 / 1/2 | 70 | 136.1 | 39.8 | 35.5 | 38.4 | 110 | 35.5 | 50 | 52 | 26 | 8.5 | 12.5 | 70 | 2.3 | 35 |
| AL40-06-A | 3/4 | 75 | 138.1 | 37.8 | 35.5 | 38.4 | 110 | 35.5 | 50 | 52 | 25 | 8.5 | 12.5 | 70 | 2.3 | 34 |
| AL50-A | 3/4, 1 | 90 | 209.1 | 41.2 | 45 | - | 110 | 45 | 70 | 66 | 35 | 11 | 13 | 90 | 3.2 | 47 |
| AL60-A | 1 | 95 | 223.1 | 44.7 | 47.5 | - | 110 | 47.5 | 70 | 66 | 35 | 11 | 13 | 90 | 3.2 | 47 |
| Model | Semi-standard specifications | |||||
|---|---|---|---|---|---|---|
| With drain guide | With barb fitting | With bowl guard | With bowl guard With drain guide | With level gauge With bowl guard | With level gauge With bowl guard With drain guide | |
| B | B | B | B | B | B | |
| AL10-A | 59.9 | - | 56.3 | 59.3 | - | - |
| AL20-A | 87.7 | - | 84.5 | 87.5 | - | - |
| AL30-A | 115.1 | 123.6 | 104.1 | 117.6 | 124.1 | 137.6 |
| AL40-A | 147.1 | 155.6 | 136.1 | 149.6 | 156.1 | 169.6 |
| AL40-06-A | 149.1 | 157.6 | 138.1 | 151.6 | 158.1 | 171.6 |
| AL50-A | 220.1 | 228.6 | 209.1 | 222.6 | 229.1 | 246.2 |
| AL60-A | 234.1 | 242.6 | 223.1 | 236.6 | 243.1 | 256.6 |
Structural drawing
AL10-A structure drawing
AL20-A structure drawing
AL30-A/AL40-A structure drawing
AL50-A/AL60-A structure drawing
Component parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Zinc diecast | Urban white |
| Die-cast aluminum | |||
| 8 | Housing | Die-cast aluminum | Urban white |
Replacement parts
| Number | Part name | Material |
|---|---|---|
| 2 | Sight dome assembly | Polycarbonate |
| 3 | Lubrication plug assembly | - |
| 4 | Damper retainer assembly | - |
| 5 | Damper (assembly) | Synthetic resin |
| 6 | Bowl O-ring | NBR |
| 7 | Bowl assemblyNote) | Polycarbonate |
Note) Bowl O-ring is included for the AL20-A to AL60-A. Contact the manufacturer regarding the bowl assembly supply for psi and °F unit specifications.
Bowl assembly for the AL30-A to AL60-A models comes with a bowl guard (steel band material).
AL10 Type Working Principle
AL10 type structure drawing
A portion of the air introduced from the IN side pressurizes the lubricant inside the bowl.
The remainder of the air passes through needle (9), and flows to the OUT side. The differential pressure between the inside of the bowl and the inside of sight dome (2), causes the lubricant inside the bowl to drip into oil passage (10). The lubricant drips from dripping tube (11), and lubricates the OUT side.
The amount of lubricant is adjusted by needle (9) on the front face. Turning the needle clockwise increases the amount of the lubricant, and turning it counterclockwise until fully open shuts off the lubricant. The needle on the side that is not used should be left fully open.
Precautions
Selection and Mounting/Adjustment
- *Use a check valve (AKM series) to prevent back flow of the lubricant when redirecting the air flow before the lubricator.
- *Do not introduce air from the outlet side as this can damage the bumper.
- *The standard bowl for the air filter, filter regulator, and lubricator, as well as the sight dome for the lubricator are made of polycarbonate. Do not use in an environment where they are exposed to or come in contact with organic solvents, chemicals, cutting oil, synthetic oil, alkali, and thread lock solutions.
Maintenance and Inspection
- *For the AL10-A/AL20-A type, the lubricant cannot be replenished while it is pressurized. Lubrication cannot take place under a pressurized condition.
- *Adjustment of the oil regulating valve for models AL20-A to AL60-A should be carried out manually. Turning the valve counterclockwise increases the dripping amount, and turning it clockwise reduces the dripping amount. The use of tools, etc. can result in damage to the unit. From the fully closed position, three rotations will bring it to the fully open position. Do not rotate it any further than this. Note that the numbered scale markings are guidelines for adjusting the position, and not indicators of the dripping amount.
- *Check the dripping amount once a day. Drip failure can cause damage to the components that need lubrication.
Other precautions
- *When the bowl is installed on the AL30-A to AL60-A, make sure the lock button lines up with the groove of the front (or the back) of the body to prevent falling or damage to the bowl.
- *See the manufacturer's catalog for product information other than the above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Oil Storage Capacity (cm3) | IN Side, Connection Type | IN Side, Plumbing Thread Nominal | Drain Exhaust | Case | OUT Side, Connection Type | OUT Side, Plumbing Thread Nominal | Min. Dripping Flow Rate (l/min) | Flow Direction | Size of Body | Accessory | Pressure Unit | Case Guard | Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 7 | M | M5 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | M | M5 | 4 | [(Right)] Left→Right | 10 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 7 | M | M5 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | M | M5 | 4 | [(Left)] Right→Left | 10 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 7 | M | M5 | [Manual] With Drain Cock | [Nylon] Nylon Case | M | M5 | 4 | [(Left)] Right→Left | 10 | Without optional mounting parts | MPa | None | - | ||
484,755 IDR | 1 Piece(s) | 31 Day(s) | 25 | Rc | 1/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/8 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/8 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/8 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | With bowl guard | - | ||
484,755 IDR | 1 Piece(s) | 31 Day(s) | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | MPa | With bowl guard | - | ||
484,755 IDR | 1 Piece(s) | 31 Day(s) | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Left)] Right→Left | 20 | With Bracket | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 15 | [(Left)] Right→Left | 20 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | G | 1/8 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/8 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 25 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 15 | [(Right)] Left→Right | 20 | With Bracket | MPa | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/8 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | psi, °F | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | psi, °F | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Left)] Right→Left | 20 | Without optional mounting parts | psi, °F | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | psi, °F | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | With Bracket | psi, °F | With bowl guard | - | ||
- | 1 Piece(s) | Quote | 25 | NPT | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 15 | [(Right)] Left→Right | 20 | With Bracket | psi, °F | With bowl guard | - | ||
617,525 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
617,525 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Left)] Right→Left | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Left)] Right→Left | 30 | Without optional mounting parts | MPa | None | - | ||
654,415 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Left)] Right→Left | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Left)] Right→Left | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 1/4 | [Manual] With Drain Cock, Barb Fitting | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Left)] Right→Left | 30 | With Bracket | MPa | None | - | ||
617,525 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
617,610 IDR | 1 Piece(s) | 20 Day(s) | 55 | Rc | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Left)] Right→Left | 30 | Without optional mounting parts | MPa | None | - | ||
642,855 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 3/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 3/8 | [Manual] With Drain Cock, Barb Fitting | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
654,415 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Left)] Right→Left | 30 | With Bracket | MPa | None | - | ||
678,640 IDR | 1 Piece(s) | 31 Day(s) | 55 | Rc | 3/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 3/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Left)] Right→Left | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | Rc | 3/8 | [Manual] With Drain Cock, Barb Fitting | [Nylon] Nylon Case | Rc | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 30 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 30 | [(Left)] Right→Left | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 1/4 | 30 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 3/8 | 40 | [(Left)] Right→Left | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | G | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | G | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 30 | [(Right)] Left→Right | 30 | Without optional mounting parts | MPa | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 30 | [(Right)] Left→Right | 30 | Without optional mounting parts | psi, °F | None | - | ||
642,855 IDR | 1 Piece(s) | 31 Day(s) | 55 | NPT | 1/4 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 1/4 | 30 | [(Right)] Left→Right | 30 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 3/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Left)] Right→Left | 30 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 3/8 | [Manual] With Drain Cock, Barb Fitting | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | psi, °F | None | - | ||
642,855 IDR | 1 Piece(s) | 31 Day(s) | 55 | NPT | 3/8 | [Manual] With Drain Cock | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Right)] Left→Right | 30 | Without optional mounting parts | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 3/8 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | psi, °F | None | - | ||
- | 1 Piece(s) | Quote | 55 | NPT | 3/8 | [Manual] With Drain Cock, Barb Fitting | [Nylon] Nylon Case | NPT | 3/8 | 40 | [(Right)] Left→Right | 30 | With Bracket | psi, °F | None | - | ||
751,400 IDR | 1 Piece(s) | 31 Day(s) | 135 | Rc | 1/4 | [Not Provided] No Drain Cock | [Nylon] Nylon Case | Rc | 1/4 | 30 | [(Right)] Left→Right | 40 | Without optional mounting parts | MPa | None | - |
Loading...
Specification/Dimensions
-
Oil Storage Capacity(cm3)
-
IN Side, Connection Type
- Rc
- NPT
- G
- M
-
IN Side, Plumbing Thread Nominal
- 1/8
- 1/4
- 3/8
- 1/2
- 3/4
- 1
- M5
-
Drain Exhaust
- Not Provided
- Manual
- Not Provided
-
OUT Side, Connection Type
- Rc
- NPT
- G
- M
-
OUT Side, Plumbing Thread Nominal
- 1/8
- 1/4
- 3/8
- 1/2
- 3/4
- 1
- M5
-
Flow Direction
- (Right)
- (Left)
- (Right)
-
Size of Body
-
Accessory
- With Bracket
- Without optional mounting parts
-
Pressure Unit
- MPa
- psi, °F
-
Case Guard
- None
- With bowl guard
-
Specifications
- Long bowl setting
- None
-
type
- AL10
- AL20
- AL30
- AL40
- AL50
- AL60
-
Case
- Plastic
- Nylon
- Aluminum with Level Gauge
- Metal
- Plastic
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Day(s) or Less
- 15 Day(s) or Less
- 20 Day(s) or Less
- 31 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy