(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Low Profile Air Gripper MHF2 Series (Part Numbers)
[Features]
· Low profile: Height is approximately 1/3 smaller (compared to product with equivalent gripping force from the MHZ2 Series).
· Contributes to device space saving measures.
· Reduces bending moments.
· Operates smoothly, providing improved accuracy.
· The stroke length can be selected.
& nbsp3 standard stroke lengths (short, middle and length) are available for each bore size.
& nbspYou can select the optimal stroke for each workpiece.
· Improved mounting repeatability.
· Piping from either direction.
· Easy positioning for mounting attachments.
· Wiring and piping can be centralized.
· High degree of mounting flexibility.
& nbspBracket not required.
& nbspCan help keep mounting height to a minimum.
· A compact design in which a large amount of gripping force is provided through the use of a double piston mechanism.
(i)Caution
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Configured Part Number is shown.
MHF2 Series Low Profile Air Gripper Specifications
Double acting, inner-diameter grip JIS symbol
Double acting, outer-diameter grip JIS symbol
Body option: axial ported (Nil) external appearance
Body option: side ported (R) external appearance
| Fluid | Air | |
|---|---|---|
| Operating pressure | ø8 (diameter 8 mm): 0.15 to 0.7 MPa | |
| ø12 to 20 (diameter 12 to 20 mm): 0.1 to 0.7 MPa | ||
| Ambient and fluid temperature | -10°C to +60℃ (no freezing) | |
| Repeatability | ±0.05 mm*1 | |
| Maximum operating frequency | Short stroke | 120 c.p.m. |
| Middle stroke | 120 c.p.m. | |
| Long stroke | 60 c.p.m. | |
| Lubrication | Non-lube | |
| Action | Double acting | |
| Auto switch (option)*2 | Solid state auto switch (3-wire, 2-wire) | |
*1 Value when no unbalanced load is applied to the finger. If the finger is subjected to an unbalanced load, the backlash of the rack pinion can be up to ±0.15 mm.
*2 See the manufacturer's catalog for detailed specifications of auto switches.
Model
| Action | Model | Bore size (mm) | Gripping force*1 | Opening/closing stroke (Both sides) mm | Weight*2 g | Internal capacity (cm3) | |
|---|---|---|---|---|---|---|---|
| Gripping force per finger effective value N | Finger opening side | Finger closing side | |||||
| Double acting | MHF2-8D | 8 | 19 | 8 | 65 | 0.7 | 0.6 |
| MHF2-8D1 | 16 | 85 | 1.1 | 1.0 | |||
| MHF2-8D2 | 32 | 120 | 2.0 | 1.9 | |||
| MHF2-12D | 12 | 48 | 12 | 155 | 1.9 | 1.6 | |
| MHF2-12D1 | 24 | 190 | 3.3 | 3.0 | |||
| MHF2-12D2 | 48 | 275 | 6.1 | 5.8 | |||
| MHF2-16D | 16 | 90 | 16 | 350 | 4.9 | 4.1 | |
| MHF2-16D1 | 32 | 445 | 8.2 | 7.4 | |||
| MHF2-16D2 | 64 | 650 | 14.9 | 14.0 | |||
| MHF2-20D | 20 | 141 | 20 | 645 | 8.7 | 7.3 | |
| MHF2-20D1 | 40 | 850 | 15.1 | 13.7 | |||
| MHF2-20D2 | 80 | 1,225 | 28.0 | 26.6 | |||
*1 Values based on pressure of 0.5 MPa, gripping point L = 20 mm.
*2 Values above do not include auto switch weight.
Structure drawing
MHF2-8D, MHF2-8D1 structure drawing
MHF2-8D2 structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodizing |
| 2 | Piston | Stainless steel | - |
| 3 | Joint | Stainless steel | Heat treated |
| 4 | Guide rail | Stainless steel | Heat treated |
| 5 | Finger | Stainless steel | Heat treated |
| 6 | Roller stopper | Stainless steel | - |
| 7 | Pinion | Carbon steel | Nitrided |
| 8 | Cap A | Aluminum alloy | Clear anodized |
| 9 | Cap B | Aluminum alloy | Clear anodized |
| 10 | Cap C | Aluminum alloy | Clear anodized |
| No. | Description | Material | Note |
|---|---|---|---|
| 11 | Head bumper | Urethane rubber | - |
| 12 | Clip | Stainless steel wire | - |
| 13 | Rack | Stainless steel | Nitrided |
| 14 | Magnet | - | Nickel plating |
| 15 | Steel ball | High carbon chrome bearing steel | - |
| 16 | Wear ring | Synthetic resin | - |
| 17 | Cylindrical roller | High carbon chrome bearing steel | - |
| 18 | Needle roller | High carbon chrome bearing steel | - |
| 19 | Parallel pin | Stainless steel | - |
| 20 | Piston seal | NBR | - |
| 21 | Gasket | NBR | - |
MHF2-12D□ to 20D□ structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodizing |
| 2 | Piston | Aluminum alloy | Clear anodized |
| 3 | Joint | Stainless steel | Heat treated |
| 4 | Guide rail | Stainless steel | Heat treated |
| 5 | Finger | Stainless steel | Heat treated |
| 6 | Roller stopper | Stainless steel | - |
| 7 | Pinion | Carbon steel | Nitrided |
| 8 | Cap A | Aluminum alloy | Clear anodized |
| 9 | Cap B | Aluminum alloy | Clear anodized |
| 10 | Cap C | Aluminum alloy | Clear anodized |
| 11 | Head bumper | Urethane rubber | - |
| 12 | Rack | Stainless steel | Nitrided |
| 13 | Magnet | - | Nickel plating |
| 14 | Steel ball | High carbon chrome bearing steel | - |
| 15 | Wear ring | Synthetic resin | - |
| 16 | ø12 (diameter 12 mm): cylindrical roller | High carbon chrome bearing steel | - |
| ø16 to 20 (diameter 16 to 20 mm): parallel pin | Stainless steel | - | |
| 17 | Needle roller | High carbon chrome bearing steel | - |
| 18 | ø12 (diameter 12 mm): round R-shaped retaining ring | Carbon steel | Phosphate coated |
| ø16 to 20 (diameter 16 to 20 mm): C-shaped retaining ring | |||
| 19 | Parallel pin | Stainless steel | - |
| 20 | Piston seal | NBR | - |
| 21 | Gasket | NBR | - |
| 22 | Gasket | NBR | - |
External dimensional drawing
(Unit: mm)
MHF2-8D dimensional drawing
*If mounting holes are used, use the hex socket head cap screw (accessory).
(Unit: mm)
MHF2-8D A detail dimensional drawing
(Unit: mm)
MHF2-8D auto switch mounting groove dimensional drawing
Precautions
- *Be sure to read the product precautions in the manufacturer's catalog before use.
- *See the manufacturer's catalog for information other than the above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Dimensions when open (mm) | Dimensions when closed (mm) | Gripping Force (when 0.5Mpa at opening) (N) | Gripping Force (when 0.5Mpa at closing) (N) | Environment, Applications | Additional Functions | Stroke Adjustment Mechanism | Operating Pressure Range (MPa) | Cylinder internal diameter (mm) | Body options | Auto switch | Number of switches | Lead wire length | Stroke (mm) | Made to order specifications | Connector type for gripper opening/closing | Stroke adjustment width (mm) | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 3 pcs. | 1 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 1 m | 16 | Fluoroelastomer seal | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 1 m | 16 | None | M8 3-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 1 m | 16 | None | M12 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 1 pc. | 1 m | 16 | Grease for food processing machines / fluorine grease | None | None | - | ||
6,374,250 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 1 pc. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9BW | 1 pc. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 14 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 0.5 m | 16 | None | M8 3-pin | None | - | ||
7,594,110 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 0.5 m | 16 | None | M8 4-pin | None | - | ||
7,593,660 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 0.5 m | 16 | None | M12 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 3 pcs. | 0.5 m | 16 | None | M12 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | M12 4-pin | 10 | - | ||
6,984,360 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 3 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
7,095,240 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 3 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 3 m | 16 | Fluoroelastomer seal | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 1 pc. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 1 pc. | 3 m | 16 | Fluorine grease | None | None | - | ||
7,704,990 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 0.5 m | 16 | None | M8 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 0.5 m | 16 | None | M12 4-pin | None | - | ||
7,206,030 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | 0.1～0.7 | 16 | Axial piping | M9BWV | 2 pcs. | 5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
7,094,970 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
- | 1 Piece(s) | 15 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | - | 16 | Axial piping | M9BW | 2 pcs. | 5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 14 | Standard | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | 0.1～0.7 | 16 | Axial piping | M9BW | 2 pcs. | 5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
- | 1 Piece(s) | 15 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide | Not Provided | - | 16 | Axial piping | M9BW | 1 pc. | 5 m | 16 | None | None | None | Standard | ||
7,012,440 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9B | 2 pcs. | 5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9B | 3 pcs. | 5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9B | 1 pc. | 5 m | 16 | None | None | None | - | ||
6,818,310 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 3 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 3 pcs. | 0.5 m | 16 | Fluorine grease | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 0.5 m | 16 | Heat resistance (100°C) | None | None | - | ||
- | 1 Piece(s) | 15 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide | Not Provided | - | 16 | Axial piping | M9N | 2 pcs. | - | 16 | Fluoroelastomer seal | None | None | Standard | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 0.5 m | 16 | Fluorine grease | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 14 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NA | 2 pcs. | 5 m | 16 | None | None | None | - | ||
6,928,740 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 3 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 4 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 6 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | 15 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | - | 16 | Axial piping | M9N | 2 pcs. | 3 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | Standard | ||
6,402,330 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 1 pc. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 1 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 1 m | 16 | With adjuster for finger opening/closing width adjustment | None | 14 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 1 m | 16 | None | M8 3-pin | None | - | ||
6,346,890 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 1 pc. | 0.5 m | 16 | None | None | None | - | ||
6,928,740 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 3 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 6 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | 15 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | - | 16 | Axial piping | M9NV | 2 pcs. | - | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | Standard | ||
7,040,340 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 2 pcs. | 3 m | 16 | None | None | None | - | ||
6,457,770 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 1 pc. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 2 pcs. | 1 m | 16 | None | None | None | - | ||
6,402,330 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 1 pc. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NV | 2 pcs. | 5 m | 16 | None | None | None | - | ||
6,874,020 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
6,984,540 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 3 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 1 pc. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 1 pc. | 3 m | 16 | Heat resistance (100°C) | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 1 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 1 pc. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 0.5 m | 16 | None | M8 3-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 2 pcs. | 0.5 m | 16 | None | M12 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NWV | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
7,095,240 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NWV | 2 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NWV | 1 pc. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9NW | 1 pc. | 5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9N | 2 pcs. | 5 m | 16 | None | None | None | - | ||
6,818,310 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | - | ||
6,928,740 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 3 m | 16 | None | None | None | - | ||
7,455,330 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 3 pcs. | 3 m | 16 | None | None | None | - | ||
7,926,210 IDR | 1 Piece(s) | 20 Day(s) | - | - | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | - | 16 | Axial piping | M9P | 2 pcs. | 3 m | 16 | With adjuster for finger opening/closing width adjustment | None | 10 | Standard | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 1 m | 16 | None | M8 3-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | None | M8 3-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Open/Close Dual Adjustment | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | M8 3-pin | 10 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide / Stroke Adjustment Function | Close Direction Adjustment | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | With adjuster for finger opening/closing width adjustment | M8 3-pin | 10 | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 1 pc. | 0.5 m | 16 | None | M8 4-pin | None | - | ||
7,538,670 IDR | 1 Piece(s) | 20 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9P | 2 pcs. | 0.5 m | 16 | None | M12 4-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9PV | 2 pcs. | 0.5 m | 16 | None | None | None | - | ||
7,040,340 IDR | 1 Piece(s) | 31 Day(s) | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9PV | 2 pcs. | 3 m | 16 | None | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9PV | 2 pcs. | 3 m | 16 | Heat resistance (100°C) | None | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9PV | 2 pcs. | 0.5 m | 16 | None | M8 3-pin | None | - | ||
- | 1 Piece(s) | Quote | 16 | 0 | 90 | 90 | Standard | With Linear Guide | Not Provided | 0.1～0.7 | 16 | Axial piping | M9PW | 2 pcs. | 0.5 m | 16 | None | None | None | - |
Loading...
Basic Information
| Type | Main body | Gripping Methods | Pinch, Chuck Type / Open, Chuck Type | Number of Fingers | 2 pcs. |
|---|---|---|---|---|---|
| Main Body Shape | Square Shape (Flat Shape) | Operation Method | Double Acting Type |
Specification/Dimensions
-
Dimensions when open(mm)
-
Dimensions when closed(mm)
-
Gripping Force (when 0.5Mpa at opening)(N)
-
Gripping Force (when 0.5Mpa at closing)(N)
-
Environment, Applications
- Standard
- Copper-free/Fluorine-free Specification
-
Stroke Adjustment Mechanism
- Not Provided
- Open Direction Adjustment
- Close Direction Adjustment
- Open/Close Dual Adjustment
-
Cylinder internal diameter(mm)
-
Body options
- Axial piping
- Side piping
-
Auto switch
-
Number of switches
-
Lead wire length
- 0.5 m
- 1 m
- 3 m
- 5 m
- None
-
Stroke(mm)
-
Made to order specifications
- Heat resistance (100°C)
- Heat resistance specification (100°C)
- EPDM seal / fluorine grease
- Fluorine grease
- Fluoroelastomer seal
- Grease for food processing machines
- Grease for food processing machines / fluorine grease
- No magnet
- None
- With adjuster for finger opening/closing width adjustment
-
Connector type for gripper opening/closing
- M8 3-pin
- M8 4-pin
- M12 4-pin
- None
-
Stroke adjustment width(mm)
-
Type
- Copper and Fluorine Unavailable Specifications
- Standard
-
type
- 20-MHF2-12D
- 20-MHF2-16D
- 20-MHF2-20D
- 20-MHF2-8D
- MHF2-12D
- MHF2-16D
- MHF2-20D
- MHF2-8D
-
Additional Functions
- With Linear Guide
- Stroke Adjustment Function
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 15 Day(s) or Less
- 20 Day(s) or Less
- 31 Day(s) or Less
- 40 Day(s) or Less
- 47 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy