(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping
68.800 Stock items for Same Day Shipping
8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama
68.800 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series (Part Numbers)
Compact Cylinder, Standard Type, Double Acting, Double Rod that that is ideal for machine designs with small space requirements.
[Features]
· Square body shape that gives you flexibility for designing machines.
· 2-way basic mounting.
· Non-rotating rod with high non-rotating accuracy.
(i)Caution
- See catalog for specification details.
- Product pictures are representations. CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Details
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series product image
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Specifications
Model Number Notation
Model number example
Individual Made-to-Order Specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -X235 | Change of piston rod end of double rod cylinder |
| -X271 | Fluororubber seals |
| -X633 | Intermediate stroke of double rod cylinder |
Made to order specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -XA□ | Change of rod-end shape |
| -XB6 | Heat-resistant cylinder (-10 to 150°C) without an auto switch |
| -XB7 | Cold-resistant cylinder (-40 to 70°C) without an auto switch |
| -XB9 | Low speed cylinder (10 to 50 mm/s) |
| -XB10 | Intermediate stroke (using exclusive body) |
| -XB13 | Low speed cylinder (5 to 50 mm/s) |
| -XC6 | Piston rod, retaining ring, rod-end nut made of stainless steel |
| -XC36 | With boss on rod side |
| -XC85 | Grease for food processing equipment |
Standard specification
| Tube Internal Diameter (mm) | 12 | 16 | 20 | 25 | |
|---|---|---|---|---|---|
| Operating method | Double acting, double rod | ||||
| Applicable fluids | Air | ||||
| Lubrication | Not required (non-lube) | ||||
| Proof pressure | 1.5 MPa | ||||
| Maximum operating pressure | 1.0 MPa | ||||
| Minimum operating pressure | 0.07 MPa | 0.05 MPa | |||
| Ambient and working fluid temperature | Without auto switch: -10°C to 70°C (No freezing) | ||||
| With auto switch: -10°C to 60°C (No freezing) | |||||
| Cushioning | None, rubber bumper | ||||
| Rod-end thread | Female thread | ||||
| Stroke length tolerance | +1.0 mm* 0 | ||||
| Operating piston speed | 50 to 500 mm/s | ||||
| Allowable kinetic energy J | Standard type | 0.022 | 0.038 | 0.055 | 0.09 |
| With rubber bumper | 0.043 | 0.075 | 0.11 | 0.18 | |
- *Stroke length tolerance does not include the amount of bumper change.
Structural drawing
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Structural Drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Cylinder tube | Aluminum Alloy | Hard Anodize |
| 2 | Collar | Aluminum Alloy | Anodized |
| 3 | Piston | Aluminum Alloy | - |
| 4 | Piston rod A | Stainless steel | - |
| 5 | Piston rod B | Stainless steel | - |
| 6 | Retaining Ring | Carbon tool steel | Phosphate coated |
| 7 | Rod-end nut | Carbon steel | Zinc chromate |
| 8 | Dampers | Urethane | - |
| 9 | Spacer for switch | Aluminum Alloy | Chromate |
| 10 | Magnet | - | - |
| 11 | Rod Gasket | NBR | - |
| 12 | Piston Gasket | NBR | - |
| 13 | Tube gasket | NBR | - |
Replacement Parts / Seal Kit
| Tube Internal Diameter (mm) | Order number | Content |
|---|---|---|
| 12 | CQSWB12-PS | A set of (11), (12), (13) listed above |
| 16 | CQSWB16-PS | |
| 20 | CQSWB20-PS | |
| 25 | CQSWB25-PS |
- *Seal kit includes (11), (12) and (13). Order the seal kit based on each bore size.
- *The seal kit does not include a grease pack, so please order a grease pack separately.
Grease pack part number: GR-S-010 (10 g)
Compact Cylinder, Standard Type, Double Acting, Double Rod CQSW Series Example Dimensions
(Unit: mm)
Standard type (through-hole / both ends tapped common): CQSWB/CDQSWB dimensional drawing
Male rod end
(Unit: mm)
| Bore size (mm) | Without auto switch | With auto switch | B1 | C1 | H1 | L1 | MM | X |
|---|---|---|---|---|---|---|---|---|
| A1 | A1 | |||||||
| 12 | 50 | 55 | 8 | 9 | 4 | 14 | M5 × 0.8 | 10.5 |
| 16 | 53 | 58 | 10 | 10 | 5 | 15.5 | M6 × 1.0 | 12 |
| 20 | 63 | 73 | 13 | 12 | 5 | 18.5 | M8 × 1.25 | 14 |
| 25 | 74 | 84 | 17 | 15 | 6 | 22.5 | M10 × 1.25 | 17.5 |
Standard type
(Unit: mm)
| Bore size (mm) | Stroke range (mm) | Without auto switch | With auto switch | C | D | E | H | I | K | L | M | N | OA | OB | Q | RA | RB | T | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | A | B | |||||||||||||||||
| 12 | 5 to 30 | 29 | 22 | 34 | 27 | 6 | 6 | 25 | M3 × 0.5 | 32 | 5 | 3.5 | 15.5 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 16 | 5 to 30 | 29 | 22 | 34 | 27 | 8 | 8 | 29 | M4 × 0.7 | 38 | 6 | 3.5 | 20 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 20 | 5 to 50 | 35 | 26 | 45 | 36 | 7 | 10 | 36 | M5 × 0.8 | 47 | 8 | 4.5 | 25.5 | 5.4 | M6 × 1.0 | 9 | 8 | 10 | 7 | 1 |
| 25 | 5 to 50 | 39 | 29 | 49 | 39 | 12 | 12 | 40 | M6 × 1.0 | 52 | 10 | 5 | 28 | 5.4 | M6 × 1.0 | 9 | 9 | 10 | 7 | 1 |
- *Note 1) For the following bore/stroke sizes, the through-hole is threaded: Standard type: ø20 (20‑mm diameter), ø25 (25‑mm diameter) 5 stroke.
- *Note 2) Rubber bumper type has the same dimensions as those indicated above.
- *Note 3) The positions of the width across flats are not the same on both sides.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Environment, Applications | Cushion | Operating Pressure (MPa) | Specifications | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Rod Tip Shape | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9B | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9N | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9N | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9NV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 25 | 50 | Standard | None | 0.05 to 1.0 | Built-in magnet | M9NV | 1 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 1 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93V | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BWV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9NV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BWV | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 15 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9N | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 20 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BW | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9B | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9B | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 25 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9NW | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 1 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | None | 0.07 to 1.0 | Built-in magnet | A90 | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93V | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BA | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 12 | 30 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93V | 0.5 | 1 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 5 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9NV | 0.5 | 2 | Flange type | Male rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A90 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A90 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A90V | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A90V | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93V | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A93V | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A96 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A96 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | A96V | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9BV | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | M9NV | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | None | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | Fluoroelastomer seals | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Without switch | - | - | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A90 | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A90 | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A90V | 0.5 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A90V | 3 | 2 | Flange type | Female rod end | None | ||
- | 1 Piece(s) | Quote | 16 | 10 | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | A93 | 0.5 | 2 | Flange type | Female rod end | None |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Double rod | Main Body Shape | Plate Cylinder |
|---|---|---|---|---|---|
| Additional Function | High rigidity / high precision high class guide |
Specification/Dimensions
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Environment, Applications
- Standard
- Low Speed
- Heat Resistant
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 3
- 5
-
The number of the switches
-
Type of Mount Support
- Compact foot type
- Flange type
- Foot
- Through-Hole / Both Ends Tapped Common (Standard)
-
Rod Tip Shape
- Female rod end
- Male rod end
-
Custom-made Specifications
- Heat-resistant cylinder (-40 to 70°C)
- Heat-resistant cylinder (-10 to 150°C)
- Low-speed cylinder (5 to 50 mm/s)
- Extend the length of the rod tip 10 mm
- Low speed cylinder (10 to 50 mm/s)
- Change of piston rod end of double rod cylinder
- Fluoroelastomer seals
- Grease for food processing equipment
- Intermediate stroke (using dedicated body)
- Intermediate stroke of double rod cylinder
- None
- Piston rod, retaining ring, rod-end nut made of stainless steel
- With boss on rod side
-
type
- CDQSW
- CQSW
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 20 Day(s) or Less
- 31 Day(s) or Less
- 40 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy