(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping
68.800 Stock items for Same Day Shipping
8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama
68.800 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/3/2025 sampai dengan 23:00. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 23:00 (WIB) 9/3/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series (Part Numbers)
- On Sale Till 31/12/2025
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series that is ideal for machine designs with small space requirements.
[Features]
· Square body shape that gives you flexibility for designing machines.
· Auto switch mounting direction allows for flexible design requirements.
· 2-way basic mounting.
· Non-rotating rod with high non-rotating accuracy.
(i)Caution
- See catalog for specification details.
- Product pictures are representations. CAD data is not supported for some model numbers.
Part Number
Configured Part Number is shown.
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series Details
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series product image
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series Specifications
| Tube Internal Diameter (mm) | 12 | 16 | 20 | 25 | |
|---|---|---|---|---|---|
| Operating method | Double acting, single rod | ||||
| Applicable fluids | Air | ||||
| Lubrication | Not required (non-lube) | ||||
| Proof pressure | 1.5 MPa | ||||
| Maximum operating pressure | 1.0 MPa | ||||
| Minimum operating pressure | 0.07 MPa | 0.05 MPa | |||
| Ambient and working fluid temperature | Without auto switch: -10°C to 70°C (No freezing) | ||||
| With auto switch: -10°C to 60°C (No freezing) | |||||
| Cushioning | None, rubber bumper* | ||||
| Rod-end thread | Female thread | ||||
| Stroke length tolerance | Standard stroke: (0 to +1.0 mm) Long stroke: (0 to +1.4 mm)* | ||||
| Operating piston speed | 50 to 500 mm/s | ||||
| Allowable kinetic energy J | Standard type | 0.022 | 0.038 | 0.055 | 0.09 |
| With rubber bumper | 0.043 | 0.075 | 0.11 | 0.18 | |
- *Stroke length tolerance does not include the amount of bumper change.
- *Only rubber bumper is available for the long stroke type.
Model Number Notation
Model number example
Individual Made-to-Order Specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -X271 | Fluororubber seals |
| -X525 | Long stroke of adjustable extension stroke cylinder (-XC8) |
| -X526 | Long stroke of adjustable extension stroke cylinder (-XC9) |
| -X1876 | With concave shape end boss on the cylinder tube head side |
Made to order specifications
| Indicator symbol | Specifications/contents |
|---|---|
| -XB6 | Heat-resistant cylinder (-10 to 150°C) without an auto switch |
| -XB7 | Cold-resistant cylinder (-40 to 70°C) without an auto switch |
| -XB9 | Low speed cylinder (10 to 50 mm/s) |
| -XB10 | Intermediate stroke (using exclusive body) |
| -XB13 | Low speed cylinder (5 to 50 mm/s) |
| -XC6 | Piston rod, retaining ring, rod-end nut made of stainless steel |
| -XC8 | Adjustable stroke cylinder / Adjustable extension type |
| -XC9 | Adjustable stroke cylinder / Adjustable retraction type |
| -XC36 | With boss on rod side |
| -XC85 | Grease for food processing equipment |
| -XC92 | Dust-resistant actuator |
Structural drawing
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series Structural Drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Cylinder tube | Aluminum Alloy | Hard Anodize |
| 2 | Collar | Aluminum Alloy | Anodized |
| 3 | Piston | Aluminum Alloy | - |
| 4 | Piston rod | Stainless steel | - |
| 5 | Retaining Ring | Carbon tool steel | Phosphate coated |
| 6 | Rod-end nut | Carbon steel | Zinc chromate |
| 7 | Spacer for switch type | Aluminum Alloy | Chromate |
| 8 | Bumper A | Urethane | - |
| 9 | Damper B | Urethane | - |
| 10 | Bottom plate | Aluminum Alloy | Anodized |
| 11 | Collar | Aluminum Alloy | Anodized |
| 12 | Bushing | Oil-impregnated sintered alloy | - |
| 13 | Wear ring | Resin | - |
| 14 | Magnet | - | - |
| 15 | Centering location ring | Aluminum Alloy | Anodized |
| *16 | Rod Gasket | NBR | - |
| *17 | Piston Gasket | NBR | - |
| *18 | Tube gasket | NBR | - |
Replacement Parts: Seal Kit (Basic Type)
| Tube Internal Diameter (mm) | Order number | Content |
|---|---|---|
| 12 | CQSB12-PS | Seal kit includes (16), (17) and (18) |
| 16 | CQSB16-PS | |
| 20 | CQSB20-PS | |
| 25 | CQSB25-PS |
Replacement Parts: Seal Kit (Long Stroke)
| Tube Internal Diameter (mm) | Order number | Content |
|---|---|---|
| 12 | CQSB12-L-PS | Seal kit includes (16), (17) and (18) |
| 16 | CQSB16-L-PS | |
| 20 | CQSB20-L-PS | |
| 25 | CQSB25-L-PS |
- *Seal kit includes (16), (17) and (18). Order the seal kit based on each bore size. (The long stroke type includes 2 tube gaskets)
- *Since the seal kit does not include a grease pack, order it separately.
Grease pack part number: GR-S-010 (10 g)
Compact Cylinder, Standard Type, Double Acting, Single Rod CQS Series Example Dimensions
Standard type (through-hole / both ends tapped common): CQSB/CDQSB dimensional drawing
Male rod end
(Unit: mm)
| Bore size (mm) | B1 | C1 | H1 | Standard stroke | Long stroke | MM | X |
|---|---|---|---|---|---|---|---|
| L1 | L1 | ||||||
| 12 | 8 | 9 | 4 | 14 | 24 | M5 × 0.8 | 10.5 |
| 16 | 10 | 10 | 5 | 15.5 | 25.5 | M6 × 1.0 | 12 |
| 20 | 13 | 12 | 5 | 18.5 | 28.5 | M8 × 1.25 | 14 |
| 25 | 17 | 15 | 6 | 22.5 | 32.5 | M10 × 1.25 | 17.5 |
With Boss on Head End
(Unit: mm)
| Bore size (mm) | G | Th9 |
|---|---|---|
| 12 | 1.5 | 15 (-0.043 to 0) |
| 16 | 1.5 | 20 (-0.052 to 0) |
| 20 | 2 | 13 (-0.043 to 0) |
| 25 | 2 | 15 (-0.043 to 0) |
- *The product with boss on head end is applicable only to standard stroke.
- *With boss on rod end: option. (Suffix -XC36 to the end of the part number.) Note that only bore sizes ø12 (12‑mm diameter) and ø16 (16‑mm diameter) are applicable to the long stroke.
Standard type
(Unit: mm)
| Bore size (mm) | Standard stroke range (mm) | Standard stroke | Long stroke range (mm) | Long stroke | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Without auto switch | With auto switch | With/without auto switch | ||||||||||||
| A | B | F | L | A | B | F | L | A | B | F | L | |||
| 12 | 5 to 30 | 20.5 | 17 | 5 | 3.5 | 25.5 | 22 | 5 | 3.5 | 35 to 200 | 45.5 | 32 | 7.5 | 13.5 |
| 16 | 5 to 30 | 20.5 | 17 | 5 | 3.5 | 25.5 | 22 | 5 | 3.5 | 35 to 200 | 45.5 | 32 | 7.5 | 13.5 |
| 20 | 5 to 50 | 24 | 19.5 | 5.5 | 4.5 | 34 | 29.5 | 5.5 | 4.5 | 75 to 200 | 55.5 | 41 | 8 | 14.5 |
| 25 | 5 to 50 | 27.5 | 22.5 | 5.5 | 5 | 37.5 | 32.5 | 5.5 | 5 | 75 to 300 | 59 | 44 | 9 | 15 |
(Unit: mm)
| Bore size (mm) | C | D | E | H | I | K | M | N | OA | OB | Q | RA | RB | T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 6 | 6 | 25 | M3 × 0.5 | 32 | 5 | 15.5 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 16 | 8 | 8 | 29 | M4 × 0.7 | 38 | 6 | 20 | 3.5 | M4 × 0.7 | 6.5 | 7.5 | 7 | 4 | 0.5 |
| 20 | 7 | 10 | 36 | M5 × 0.8 | 47 | 8 | 25.5 | 5.4 | M6 × 1.0 | 9 | 8 | 10 | 7 | 1 |
| 25 | 12 | 12 | 40 | M6 × 1.0 | 52 | 10 | 28 | 5.4 | M6 × 1.0 | 9 | 9 | 10 | 7 | 1 |
- *For the following bore/stroke sizes, the through-hole is threaded: Standard switch: ø12 (12‑mm diameter) and ø16 (16‑mm diameter) 5 stroke; ø20 (20‑mm diameter) 5 to 15 stroke, ø25 (25‑mm diameter) 5 and 10 stroke. Built-in magnet with auto switch: ø20 (20‑mm diameter) 5 mm stroke.
- *Rubber bumper type has the same dimensions as those indicated above.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Main Body Shape | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Additional Function | Environment, Applications | Cushion | Operating Pressure (MPa) | Specifications | Stroke Type | Body Options | Auto Switches | Lead Wire | The number of the switches | Type of Mount Support | Rod Tip Shape | Custom-made Specifications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M8 4-pin plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M8 4-pin plug connector) | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
1,628,900 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
1,049,800 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Fluoroelastomer seals | ||
1,042,110 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
1,107,990 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
765,450 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
1,158,400 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9PV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
1,107,990 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9PV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
814,500 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9PV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9PV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Fluoroelastomer seals | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low speed cylinder (10 to 50 mm/s) | ||
488,500 IDR | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Female rod end | Piston rod, retaining ring, rod-end nut made of stainless steel | ||
436,590 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A90V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A90V | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
668,340 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,176,500 IDR | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Piston rod, retaining ring, rod-end nut made of stainless steel | ||
1,123,560 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Fluoroelastomer seals | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | With boss on rod side | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,212,700 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 1 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,683,200 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 1 (M12 4-pin A-cord [normal-key] plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
850,700 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 1 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
1,647,000 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 (M12 4-pin A-cord [normal-key] plug connector) | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,321,300 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Piston rod, retaining ring, rod-end nut made of stainless steel | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
782,190 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,176,500 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9PV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Fluoroelastomer seals | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Piston rod, retaining ring, rod-end nut made of stainless steel | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Dust-resistant actuator | ||
380,100 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
1,140,300 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
760,200 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
724,000 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
1,067,900 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | Rubber cushion | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end female thread + boss on head end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Rod end male thread + boss on head end | None | ||
742,100 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Rod end male thread + boss on head end | None | ||
358,200 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | Without switch | - | - | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Low Speed | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A90V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low speed cylinder (10 to 50 mm/s) | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A90V | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
586,890 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable extension type | ||
553,410 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable extension type | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A93V | 5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | A96V | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
895,950 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | F8B | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | F9G | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
977,400 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 3 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard / Low Speed | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Low-speed cylinder (5 to 50 mm/s) | ||
1,665,000 IDR | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable extension type | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable retraction type | ||
1,042,110 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,738,100 IDR | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable extension type | ||
700,740 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 3 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | Adjustable stroke cylinder / Adjustable retraction type | ||
1,009,800 IDR | 1 Piece(s) | 31 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 1 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
760,200 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 1 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
668,340 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 0.5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
1,230,800 IDR | 1 Piece(s) | 20 Day(s) | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9BV | 5 | 1 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None | ||
- | 1 Piece(s) | Quote | [Block Shape] Plate Cylinder | 16 | 5 | High rigidity / high precision high class guide | Standard | None | 0.07 to 1.0 | Built-in magnet | Standard stroke | - | M9NV | 0.5 | 2 | Through-Hole / Both Ends Tapped Common (Standard) | Male rod end | None |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods |
|---|
Specification/Dimensions
-
Main Body Shape
- Block Shape
- Block Shape
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 102
- 104
- 105
- 106
- 107
- 108
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 118
- 120
- 124
- 125
- 126
- 127
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 144
- 145
- 148
- 150
- 152
- 154
- 155
- 156
- 158
- 159
- 160
- 162
- 165
- 166
- 168
- 170
- 172
- 173
- 175
- 176
- 180
- 182
- 185
- 186
- 187
- 188
- 190
- 193
- 195
- 199
- 200
- 202
- 206
- 210
- 212
- 214
- 215
- 218
- 220
- 225
- 230
- 233
- 235
- 240
- 245
- 250
- 252
- 254
- 255
- 258
- 260
- 263
- 265
- 268
- 270
- 275
- 280
- 285
- 290
- 295
- 299
- 300
-
Additional Function
- High rigidity / high precision high class guide
-
Environment, Applications
- Standard
- Low Speed
- Heat Resistant
-
Cushion
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Stroke Type
- Long stroke
- Standard stroke
-
Body Options
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (SC type)
- 0.5 (SE type)
- 0.5 (M8 3-pin plug connector)
- 0.5 (M8 4-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 1 (M8 3-pin plug connector)
- 1 (M8 4-pin plug connector)
- 1 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
-
The number of the switches
-
Type of Mount Support
- Compact foot type
- Foot
- Head-end flange
- Rod-end flange type
- Through-Hole / Both Ends Tapped Common (Standard)
- U-Shaped Clevis Type
-
Rod Tip Shape
- Female rod end
- Male rod end
- Rod end female thread + boss on head end
- Rod end male thread + boss on head end
-
Custom-made Specifications
- Cold-resistant cylinder (-40 to 70°C) without an auto switch
- Heat-resistant cylinder (-10 to 150°C) without an auto switch
- Low-speed cylinder (5 to 50 mm/s)
- Long stroke of adjustable extension stroke cylinder (-XC8)
- Long stroke of adjustable extension stroke cylinder (-XC9)
- Extend the length of the rod tip 10 mm
- Low speed cylinder (10 to 50 mm/s)
- Adjustable stroke cylinder / Adjustable extension type
- Adjustable stroke cylinder / Adjustable retraction type
- Double clevis pin and double knuckle pin material: stainless steel
- Dust-resistant actuator
- Fluoroelastomer seals
- Grease for food processing equipment
- Intermediate stroke (using dedicated body)
- None
- Piston rod, retaining ring, rod-end nut made of stainless steel
- With boss on rod side
- With concave shape end boss on the cylinder tube head side
- With split pin for double clevis pin and double knuckle pin and flat washer
-
type
- CDQS
- CQS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 20 Day(s) or Less
- 31 Day(s) or Less
- 34 Day(s) or Less
- 36 Day(s) or Less
- 37 Day(s) or Less
- 40 Day(s) or Less
- 41 Day(s) or Less
- 45 Day(s) or Less
- 47 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy