(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Proximity Sensor, E2E/E2EQ NEXT Series

Proximity Sensor, E2E/E2EQ NEXT Series
  • On Sale Till 31/03/2025

【Features】
・「Long-distance detection」Avoids detection mistakes and work collisions. The detection distance is about twice that of the conventional E2E series。
・「Oil resistance ability value 2 years」Demonstrate。Uses a cable with improved oil resistance。
・「Equipped with high brightness LED」You can see the indicator light no matter where you fix it at 360 °。

PDF

Part Number

Configured Part Number is shown.

An extremely durable OMRON Proximity Sensors with an overwhelmingly long detection distance

We have created Proximity Sensors equipment that does not stop suddenly due to malfunctions or collisions!

Do you have any of these concerns of OMRON Proximity Sensors?

Problem 1
Because the sensing distance is short, it is easy to collide with the sensing object, causing a sudden stoppage of production equipment.
Problem 2
When replacing the Proximity Sensors, it takes a lot of time to adjust it to the appropriate distance. Depending on the worker's skill, the adjustment position may vary, making detection unstable.
Problem 3
Cutting oil will cause deterioration of the cable.
The solution is the E2E NEXT series Proximity Sensors!
Solution 1:
With the world's longest detection distance of 7mm for M12, your equipment will operate stably without colliding with Proximity Sensors!
Solution 2:
Replacement time has been dramatically reduced to approximately 10 seconds*2! No adjustments are required, so anyone can replace the filter in the same position.
Solution 3:
IP67G+ Omron oil-resistant component evaluation standard provides oil resistance of 2 years!
 
*1 As of September 2017. According to Omron research.
*2 Time required to adjust the distance when installing the Proximity Sensors. According to Omron research.

With the world's longest detection distance of 7mm for M12, there is no collision with the OMRON Proximity Sensors, ensuring stable operation of your equipment!

Proximity Sensors E2E NEXT achieves a "long detection distance"! It contributes tothe realization of equipment that does not stop suddenly due to malfunction or collision .

Achieves approximately twice the distance of conventional OMRON Proximity Sensors

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

Detection errors with OMRON Proximity Sensors are unlikely to occur even if the dog separates due to device vibration.

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

Collisions with OMRON Proximity Sensors are unlikely to occur even if the workpiece seating position varies or is deflected.

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

The OMRON Proximity Sensors replacement time has been greatly reduced to approximately 10 seconds! No adjustments are required, so anyone can replace the parts in the same position.

<Proximity Sensors Previously>

 

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

 

Temporarily fix the Proximity Sensors

Check the position of the workpiece ↓ ↑ Repeat fine adjustments
until stable ↓ Tighten further to complete

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

<OMRON Proximity Sensors Replacement takes just 10 seconds using the "e-jig">

 

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

 

OMRON Proximity Sensors Just insert and tighten!

The O-ring prevents foreign matter such as cutting oil from entering the e-jig, ensuring positioning accuracy (IP67G).

The OMRON Proximity Sensors Can be installed in existing facilities.

Even though the Proximity Sensors E2E NEXT is one size smaller, it has almost the same detection distance as conventional products (for M12, the detection distance is 7 mm, the same as the conventional M18).
By combining it with an e-jig, you can easily upgrade your existing equipment to one with a sensor replacement time of 10 seconds.

 

1. Remove the "M18" Proximity Sensors installed in the existing equipment.

 

2. Attach the "M18" size e-jig

 

3. Insert the "M12" E2E NEXT series into the e-jig

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

IP67G+ OMRON Proximity Sensors oil-resistant component evaluation standard provides oil resistance of 2 years!

The E2E NEXT (long distance type) e-jig has an IP67G rating to prevent the intrusion of foreign objects such as cutting oil and chips, andThe Proximity Sensors can be used in processing processes that use cutting oil.

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

The OMRON Proximity Sensors Also contributes to improved usability and freedom

The OMRON Proximity Sensors Can be installed without worrying about the direction of the indicator light

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

The OMRON Proximity Sensors Compact size improves facility design flexibility

By adopting the Proximity Sensors E2E NEXT (long distance type), you can contribute to equipment miniaturization in various ways while maintaining the same detection distance.Downsizing is possible
because the detection distance is approximately twice as long as conventional models.

 M30M18M18M12M12M8merit
E2EE2E NEXTE2EE2E NEXTE2EE2E NEXT
Detection distance10mm11mm7mm7mm3mm3mm 
Detection surface diameter30mm18mm18mm12mm12mm8mm1. Reduction in installation space
Body length60mm54.3mm55mm46.1mm47mm36.8mm2. Reduction of depth space
Bend Radius18mm18mm18mm12mm12mm12mm3. Reduction of depth space
Proximity Sensors Cable diameter6mm6mm6mm4mm4mm4mm4. Thinner cable bundles

<Proximity Sensors Easy to place on welding fixture>

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

<You can consolidate Proximity Sensors models and standardize your inventory>

Proximity Sensor E2E/E2EQ NEXT Series: Related Images

OMRON Proximity Sensors Product development story

The development of the technology that forms the basis of the long-distance stable detection technology installed in E2E-NEXT began in 2000. The housing size of the OMRON Proximity Sensors is small, starting from a φ3 cylindrical shape,and the number of parts that can be mounted inside this housing is limited. The main circuit needs to be integrated using semiconductor process technology, so a custom IC is used.

Conventional custom ICs have been equipped with custom ICs composed of analog circuits.
However, the digital correction technology, which is an important element in realizing the long-distance stable detection that is the key to E2E-NEXT, has a large circuit scale and requires a fundamental review of the circuit design. Wedecided to use a digital-analog hybrid IC with a built-in digital circuit that can be finely wired. The feature of
this IC is that it can digitally control the oscillation amplitude of the Proximity Sensors and digitize and control the adjustment amount for each sensor.

The detection distance-temperature characteristics of the Proximity Sensors are affected by the temperature characteristics of the parts and the layout of the circuit, so optimization is required for each type.
In addition, the amount of correction for the detection distance depends on the shape and positional variation of the parts that make up the sensor, which causes variation.
Conventionally, this correction was adjusted in the intermediate process of production, but this is a major error factor.
Therefore, by using a unique communication method to write correction data for detection distance - temperature characteristics into the digital-analog hybrid IC, it became possible to carry out the correction at the final inspection. The

most difficult aspect of developing this digital-analog hybrid IC was that it was necessary to define all of the requirements and incorporate them into the IC specifications, even though these were taken for granted in conventional analogICs and specifications that were implicitly determined from past experience. Numerous problems occurred due to insufficient condition setting and incorporation into the specifications of Proximity Sensors, and there were many times whenthe schedule had to be readjusted.
However, by continuing the challenge without giving up, I believe we have achieved the world's longest detection distance* for a two-wire Proximity Sensors.

*As of September 2017, according to a survey by OMRON Proximity Sensors Corporation .

Part Number
E2E-X5B218 2M
E2E-X5C118 2M
E2E-X5D1-M1TGJ-T 0.3M
E2E-X5D1-N 2M
E2E-X5D1-N 5M
E2E-X11D118 2M
E2E-X11D118 5M
E2E-X11D118-M1TGJ 0.3M
E2E-X11D118-M1TGJ-T 0.3M
E2E-X11D118-R 2M
E2E-X11D118-T 2M
E2E-X11D118-TR 2M
E2E-X11D218 2M
E2E-X11D218 5M
E2E-X11D218-M1TGJ 0.3M
E2E-X11D218-R 2M
E2E-X20MD1L18 2M
E2E-X20MD1L18 5M
E2E-X20MD1L18-M1TGJ 0.3M
E2E-X20MD2L18 2M
E2EQ-X11D118 2M
E2EQ-X11D118-M1TGJ-T 0.3M
E2EQ-X11D118-T 2M
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSDetection distance L1 [classification]
(mm)
Detected Objects Operating Environment Shielded / Non-shielded Detection Direction Case Material Detecting Surface Material Amplifier Screw Detection Head Size Head size Depth (range)
(mm)
Head size Depth
(mm)
Protection Structure (IEC) Protection Structure (DIN40050-9) Types Power Type Output Mode Operation Mode Connection Method Cable Length
(m)
Different Frequency Type Cable Specifications Detection distance L1 details
(mm)
IO-Link Transmission Speed Standard sensing object Model details Body size Case detail Protection Structure

500,000 IDR

1 Piece(s) Quote -~5Magnetic MetalStandard / Cold ResistanceShield Type---Amplifier Built-in TypeM18----Short distance typeDC 3-wire3-wire (PNP)NCPre-wired model2-Standard PVC cable5IO-Link non-compliant--StandardWithout spatter-resistant coatingIP67 / IP67G / IP69K

1,260,915 IDR

1 Piece(s) 8 Day(s) or more 10~5Magnetic MetalOil Resistance Reinforcement / Water/Drip ProofingShield TypeFront SurfaceBrass Nickel PlatedPolybutylene TerephthalateAmplifier Built-in TypeM1830.1~4038---DC 3-wireNPNNOPre-wired Model2StandardStandard PVC cable5±10%-Iron, 18 × 18 × 1 mm-Standard--

1,345,116 IDR

1 Piece(s) 11 Day(s) or more ----Shield Type----M18--IP67IP67GStandard distance-2-wire (no polarity)NOM12 Pre-wired Smartclick connector model0.3-Standard PVC cable5---StandardWithout spatter-resistant coating-

1,071,337 IDR

973,310 IDR

1 Piece(s) Same day ----Shield Type----M18--IP67IP67GStandard distance-2-wire (polarity)NOPre-wired model2-Standard PVC cable5--Single distance model (Applicable only to Pre-wired Models)StandardWithout spatter-resistant coating-

1,207,732 IDR

1 Piece(s) 8 Day(s) or more ----Shield Type----M18--IP67IP67GStandard distance-2-wire (polarity)NOPre-wired Model5-Standard PVC cable5--Single distance model (Applicable only to Pre-wired Models)StandardWithout spatter-resistant coating-

1,559,289 IDR

1,166,348 IDR

1 Piece(s) Same day ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired model2-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,645,775 IDR

1,463,423 IDR

1 Piece(s) Same day ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired Model5-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,707,167 IDR

1,491,552 IDR

1 Piece(s) Same day ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOM12 Pre-wired Smartclick connector model0.3-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,783,158 IDR

1 Piece(s) 8 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (no polarity)NOM12 Pre-wired Smartclick connector model0.3-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,729,891 IDR

1 Piece(s) 18 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired Model2-Robot (bending-resistant) PVC cable11---StandardWithout spatter-resistant coating-

1,635,281 IDR

1,427,764 IDR

1 Piece(s) Same day ----Shield Type----M18--IP67IP67GSingle distance-2-wire (no polarity)NOPre-wired model2-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,806,118 IDR

1 Piece(s) 19 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (no polarity)NOPre-wired Model2-Robot (bending-resistant) PVC cable11---StandardWithout spatter-resistant coating-

1,559,289 IDR

1 Piece(s) 8 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NCPre-wired model2-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,638,826 IDR

1 Piece(s) 27 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NCPre-wired Model5-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,700,217 IDR

1 Piece(s) 11 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NCM12 Pre-wired Smartclick connector model0.3-Standard PVC cable11---StandardWithout spatter-resistant coating-

1,729,891 IDR

1 Piece(s) 19 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NCPre-wired Model2-Robot (bending-resistant) PVC cable11---StandardWithout spatter-resistant coating-

1,560,736 IDR

1,358,465 IDR

1 Piece(s) Same day ----Non Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired model2-Standard PVC cable20---Long bodyWithout spatter-resistant coating-

1,647,222 IDR

1 Piece(s) 11 Day(s) or more ----Non Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired Model5-Standard PVC cable20---Long bodyWithout spatter-resistant coating-

1,701,665 IDR

1 Piece(s) 8 Day(s) or more ----Non Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOM12 Pre-wired Smartclick connector model0.3-Standard PVC cable20---Long bodyWithout spatter-resistant coating-

1,560,736 IDR

1 Piece(s) 11 Day(s) or more ----Non Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NCPre-wired model2-Standard PVC cable20---Long bodyWithout spatter-resistant coating-

2,211,880 IDR

1 Piece(s) 27 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (polarity)NOPre-wired Model2-Standard PVC cable11---StandardWith spatter-resistant coating-

2,435,750 IDR

1 Piece(s) 11 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (no polarity)NOM12 Pre-wired Smartclick connector model0.3-Standard PVC cable11---StandardWith spatter-resistant coating-

2,287,872 IDR

1 Piece(s) 19 Day(s) or more ----Shield Type----M18--IP67IP67GSingle distance-2-wire (no polarity)NOPre-wired Model2-Standard PVC cable11---StandardWith spatter-resistant coating-

Loading...

  1. 1
 

Basic Information

Shape Screw Type Power Supply Voltage 10 to 30 VDC

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)