(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 24/11/2024 sampai dengan 6:00 pada tanggal 25/11/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (WIB) 25/11/2024. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
JIS V-Pulley A Series
- On Sale Till 31/03/2025
Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway, and set screw machining standardized.
· Easy set-up
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
· Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
· Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.
(i)Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Japanese Only
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| 50-A-1 |
| 50-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 50-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 50-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 50-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 50-A-2 |
| 50-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 50-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 50-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 50-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 56-A-1 |
| 56-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 56-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 56-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 56-A-1-[12,14,15,16,17,18,19,20,22]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 56-A-2 |
| 56-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 56-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 56-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 56-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 63-A-1 |
| 63-A-2 |
| 63-A-3 |
| 63-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 63-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 63-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 63-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 67-A-1 |
| 67-A-1-[12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 67-A-1-[12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 67-A-1-[12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 67-A-1-[12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 67-A-2 |
| 67-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 67-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 67-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 67-A-2-[17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 67-A-3 |
| 67-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 67-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 67-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 67-A-3-[22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 71-A-1 |
| 71-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 71-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 71-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 71-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 71-A-2 |
| 71-A-2-[10,11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 71-A-2-[10,11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 71-A-2-[10,11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 71-A-2-[10,11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 71-A-3 |
| 71-A-3-[11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 71-A-3-[11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| 71-A-3-[11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| 71-A-3-[11,12,14,15,16,17,18,19,20,22,24,25,28]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF]-P |
| 75-A-1 |
| 75-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 75-A-1-[10,11,12,14,15,16,17,18,19,20,22,24,25]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H]-P |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Nominal Diameter (mm) | Number of grooves (piece) | Type | Additional Work | Key Groove, Push Screw Machining | Key types | Push Screw Attached | Shaft Hole Dia. | Shaft hole tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
173,535 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 50 | 1 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 15 Day(s) or more | 10 | 50 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 15 Day(s) or more | 10 | 50 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 15 Day(s) or more | 10 | 50 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 15 Day(s) or more | 10 | 50 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
262,503 IDR | 1 Piece(s) | 8 Day(s) or more | 10 | 50 | 2 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 50 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 50 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 50 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 50 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
200,449 IDR | 1 Piece(s) | 14 Day(s) or more | 10 | 56 | 1 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | 56 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | 56 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | 56 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 11 Day(s) or more | 10 | 56 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 12 ～ 22 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
280,246 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 56 | 2 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 56 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 56 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 56 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 56 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
224,844 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 63 | 1 | 11U | No | - | - | - | - | - | ||
358,333 IDR | 1 Piece(s) | 10 Day(s) or more | 10 | 63 | 2 | 11U | No | - | - | - | - | - | ||
484,444 IDR | 1 Piece(s) | 16 Day(s) or more | 10 | 63 | 3 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 63 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 63 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 63 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 63 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
246,569 IDR | 1 Piece(s) | 11 Day(s) or more | 10 | 67 | 1 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 12 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 12 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 12 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 1 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 12 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
334,105 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 67 | 2 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 2 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 17 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
441,389 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 67 | 3 | 11U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 67 | 3 | 11U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 22 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
243,161 IDR | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 1 | 21U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
359,444 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 71 | 2 | 21U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 2 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 10 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 2 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 10 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 2 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 10 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 2 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 10 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
467,500 IDR | 1 Piece(s) | 13 Day(s) or more | 10 | 71 | 3 | 21U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 3 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 11 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 3 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 11 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 3 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | NA | 11 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 71 | 3 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | New JIS, Sloped Key (S1 Side) / Old JIS, Sloped Key (S1 Side) / New JIS, Sloped Key (S2 Side) / Old JIS, Sloped Key (S2 Side) / New JIS, Sloped Key (S3 Side) / Old JIS, Sloped Key (S3 Side) / New JIS, Parallel Key / New JIS, Sloped Key (SF Side) / Old JIS, Parallel Key / Old JIS, Sloped Key (SF Side) | Available | 11 ～ 28 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
254,029 IDR | 1 Piece(s) | 8 Day(s) or more | 10 | 75 | 1 | 21U | No | - | - | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 75 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | NA | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | 75 | 1 | 21U | Presence | Parallel Key Groove + Push Screw x1 / Push Screw x1 / Parallel Key Groove + Push Screw x2 (90 degrees) / Push Screw x2 (90 Degrees) / Parallel Key Groove + Push Screw x2 (120 degrees) / Push Screw x2 (120 Degrees) / NA / Parallel Key Groove / Sloped Key Groove | Without Keyway | Available | 10 ～ 25 | Tolerance Zone F, Class 6 / Tolerance Zone G, Class 6 / Tolerance Zone H, Class 6 / Tolerance Zone F, Class 7 / Tolerance Zone G, Class 7 / Tolerance Zone H, Class 7 / Tolerance Zone F, Class 8 / Tolerance Zone G, Class 8 / Tolerance Zone H, Class 8 |
Loading...
Basic Information
| Groove shape | A |
|---|
Specification/Dimensions
-
Nominal Diameter(mm)
-
Number of grooves(piece)
- 1
- 2
- 3
-
Type
-
Additional Work
- No
- Presence
-
Key Groove, Push Screw Machining
-
Key types
-
Push Screw Attached
- Available
- NA
-
Shaft Hole Dia.
-
Shaft hole tolerance
- Tolerance Zone F, Class 6
- Tolerance Zone G, Class 6
- Tolerance Zone H, Class 6
- Tolerance Zone F, Class 7
- Tolerance Zone G, Class 7
- Tolerance Zone H, Class 7
- Tolerance Zone F, Class 8
- Tolerance Zone G, Class 8
- Tolerance Zone H, Class 8
-
type
- A-1
- A-2
- A-3
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy