(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

All Stainless Steel Body Proximity Sensor [E2FM]

All Stainless Steel Body Proximity Sensor [E2FM]
  • On Sale Till 31/03/2025

[Features]
· Realized a proximity sensor that is hard to break even in harsh locations.
· All stainless body.
· Aluminum chips detection.
· Embedded installation in mounting metal (iron) is possible.
· chemical resistance certified by Europe Ecolab.
· We have an product line-up of cord drawing type, DC 3 wire NPN output, fluororesin coating type.

PDF

Japanese Only

Dimensional Drawing of OMRON Proximity Sensors

OMRON Proximity Sensors Cord Pull-Out Type

All-stainless steel body proximity sensor E2FM Pre-wired type outline drawing

OMRON Proximity Sensors Connector Relay Type

All-stainless body proximity sensor E2FM connector relay type outline drawing

OMRON Proximity Sensors Connector Type (M12)

All-stainless body proximity sensor E2FM connector type (M12) outline drawing

Specification Table of OMRON Proximity Sensors

OMRON Proximity Sensors Ratings/Performance

Proximity Sensors DC 2-wire type (E2FM-X□D□)

Proximity Sensors itemProximity Sensors format
Model E2FM-
X1R5D1-□
Model E2FM-X2D1-□Model E2FM-X5D1-□Model E2FM-
X10D1-□
Model E2FM-X2D1-
M1TGJ-T
Model E2FM-X5D1-
M1TGJ-T
Model E2FM-X10D1-
M1TGJ-T
AppearanceM8M12M18M30M12M18M30
shieldshield
Detection distance1.5mm±10%2mm±10%5mm±10%10mm±10%2mm±10%5mm±10%10mm±10%
Set distance0 to 1.05 mm0 to 1.4 mm0 to 3.5 mm0 to 7 mm0 to 1.4 mm0 to 3.5 mm0 to 7 mm
Hysteresis15% or less of detection distance
Detectable ObjectsMagnetic metals (non-magnetic metals will reduce the detection distance. See page 5 of the digital catalog for "Characteristics Data")
Standard detection objectIron 8×8×1mmIron 12 x 12 x 1 mmIron 30×30×1mmIron 54×54×1mmIron 12 x 12 x 1 mmIron 30×30×1mmIron 54×54×1mm
Response frequency *1200Hz100Hz100Hz50Hz100Hz100Hz50Hz
Power supply voltage (operating voltage range)DC12-24V Ripple (pp) 10% or less (DC10-30V)
Leakage current0.8mA or less
Proximity Sensors Output FormatPolarExtreme
Proximity Sensors Control OutputOpening and closing capacity3 to 100mA
Residual voltage3V or less (load current 100mA or less, cord length 2m)5V or less (load current 100mA or less, cord length 2m)
Indicator LightOperation indicator (red LED), setting operation indicator (green LED)
Operation mode
(when detecting object approaching)
NO (normally open)
Protection CircuitSurge absorption, load short circuit protection
Ambient Temperature RangeDuring operation and storage: -25 to +70°C (but no freezing or condensation)
Ambient Humidity RangeDuring operation and storage: 35 to 95% RH (no condensation)
Temperature effectsChange in detection distance within the temperature range of -25 to +70°C is within ±20% (based on detection distance at +23°C)
Voltage effectChange in detection distance is within ±1% within the range of rated power supply voltage ±15% (based on detection distance at rated power supply voltage)
Insulation resistance50MΩ or more (DC500V megger) between live parts and case
Withstand voltageAC1,000V 50/60Hz 1min Between live parts and case
Vibration (durability)10 to 55Hz, double amplitude 1.5mm, 2h each in X, Y, and Z directions
Impact (durability)500m/s210 times each in
X, Y, and Z directions
1,000m/s2 10 times in each direction of X, Y, Z
Protective structureIEC60529 standard IP67
Proximity Sensors Connection methodNo mark: Pre-wired type (standard cord length 2m)
-M1GJ-□ type: Connector relay type (standard cord length 300mm)
Weight
*Packaged
Cord pull-out
type 2m
Approx. 105gApprox. 190gApprox. 215gApprox. 295g---
Proximity Sensors Connector relay
type
Approx. 65gApprox. 85gApprox. 110gApprox. 190gApprox. 85gApprox. 110gApprox. 190g
Proximity Sensors MaterialcaseStainless steel (SUS303)
Detection surface
(thickness)
Stainless steel (SUS303)
(0.4mm)(0.8mm)(0.8mm)
Clamping NutStainless steel (SUS303)
codePVC (flame retardant)
Toothed washerIron Zinc plating
Includedoperating instructions

*1.The response frequency of the DC switching unit is the average value. The measurement conditions are: The Proximity Sensors standard sensing object is used, the distance between the sensing objects is twice that of the standard sensingobject, and the set distance is 1/2 the sensing distance.

 

Proximity Sensors DC 3-wire type (E2FM-X□C□, E2FM-X□B□)

Proximity Sensors itemProximity Sensors format
Model E2FM-X1R5□Model E2FM-X2□Model E2FM-X5□Model E2FM-X10□
AppearanceM8M12M18M30
shieldshield
Detection distance1.5mm±10%2mm±10%5mm±10%10mm±10%
Set distance0 to 1.05 mm0 to 1.4 mm0 to 3.5 mm0 to 7 mm
Hysteresis15% or less of detection distance
Detectable ObjectsMagnetic metals (non-magnetic metals will reduce the detection distance. See page 5 of the digital catalog for "Characteristics Data")
Standard detection objectIron 8×8×1mmIron 12 x 12 x 1 mmIron 30×30×1mmIron 54×54×1mm
Response frequency *1200Hz100Hz100Hz50Hz
Power supply voltage (operating voltage range)DC12-24V Ripple (pp) 10% or less (DC10-30V)
Current consumption10mA or less
Proximity Sensors Control OutputOpening and closing capacity200mA or less
Residual voltage2V or less (load current 200mA or less, cord length 2m)
Indicator LightOperation indicator (yellow LED)
Operation mode (when detecting object approaching)C1 type: NPN open collector NO (normally open)
B1 type: PNP open collector NO (normally open)
Protection CircuitPower supply reverse polarity protection, surge absorption, load short circuit protection, output reverse polarity protection (excluding E2FM-X1R5B1-M1)
Ambient Temperature RangeDuring operation and storage: -25 to +70°C (but no freezing or condensation)
Ambient Humidity RangeDuring operation and storage: 35 to 95% RH (no condensation)
Temperature effectsChange in detection distance within the temperature range of -25 to +70°C is within ±20% (based on detection distance at +23°C)
Voltage effectChange in detection distance is within ±1% within the range of rated power supply voltage ±15% (based on detection distance at rated power supply voltage)
Insulation resistance50MΩ or more (DC500V megger) between live parts and case
Withstand voltageAC1,000V 50/60Hz 1min Between live parts and case
Vibration (durability)10 to 55Hz, double amplitude 1.5mm, 2h each in X, Y, and Z directions
Impact (durability)500m/s210 times each in X, Y, and Z directions1,000m/s2 10 times in each direction of X, Y, Z
Protective structureIEC60529 standard IP67
Proximity Sensors Connection methodNo mark: Pre-wired type (standard cord length 2m)
-M1 type: Connector type
Weight
*Packaged
Cord pull-out
type 2m
-Approx. 170gApprox. 190gApprox. 275g
Proximity Sensors Connector relay
type
Approx. 45gApprox. 55gApprox. 75gApprox. 160g
Proximity Sensors MaterialcaseStainless steel (SUS303)
Detection surface
(thickness)
Stainless steel (SUS303)
(0.4mm)(0.8mm)
Clamping NutStainless steel (SUS303)
Toothed washerIron Zinc plating
Proximity Sensors Materialoperating instructions

*1.The response frequency of the DC switching unit is the average value. The measurement conditions are: The Proximity Sensors standard sensing object is used, the distance between the sensing objects is twice that of the standard sensingobject, and the set distance is 1/2 the sensing distance.

Part Number
E2FM-X2B1-M1
E2FM-X2D1 2M
E2FM-X2D1-M1TGJ 0.3M
E2FM-X5B1-M1
E2FM-X5D1-M1TGJ 0.3M
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipDetection distance L1 [classification]
(mm)
Screw Detection Head Size Head size Depth (range)
(mm)
Head size Depth
(mm)
Power Type Output Mode Connection Method Connector pin arrangement Cable Length
(m)
Cable Specifications Detection distance L1 details
(mm)

2,672,949 IDR

1 Piece(s) 11 Day(s) or more ~2M1230.1~4033Direct Current 3-Wire TypePNP Open CollectorConnector model (M12)①+V, ③0V, ④ output--2

2,627,513 IDR

2,074,159 IDR

1 Piece(s) Same day ~2M1230.1~4033Direct Current 2-Wire TypeDC 2-wire polarizedPre-wired model-2Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core2

3,925,800 IDR

1 Piece(s) Same day ~2M1230.1~4033Direct Current 2-Wire TypeDC 2-wire polarizedPre-wired smartclick connector model (M12)①-④ pin0.3Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core2

2,758,324 IDR

1 Piece(s) 8 Day(s) or more ~5M1830.1~4036Direct Current 3-Wire TypePNP Open CollectorConnector model (M12)①+V, ③0V, ④ output--5

2,765,454 IDR

1 Piece(s) 8 Day(s) or more ~5M1830.1~4036Direct Current 2-Wire TypeDC 2-wire polarizedPre-wired smartclick connector model (M12)①-④ pin0.3Vinyl (PVC) insulated round cord (flame retardant), φ6, 2-core5

Loading...

  1. 1
 

Basic Information

Shape Screw Type Detected Objects Magnetic Metal Operating Environment Standard / Chemical Resistant Products / Non-chipping / Cold Resistance
Shielded / Non-shielded Shield Type Detection Direction Front Surface Case Material Stainless Steel (SUS303)
Detecting Surface Material Stainless Steel (SUS303) Amplifier Amplifier Built-in Type Acquired Standards CE / UL / IEC
Protection Structure (IEC) IP67 Types All stainless steel body type (unbreakable "tough" metal head) Power Supply Voltage 12-24 VDC
Operation Mode NO Different Frequency Type Standard

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)