(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Brass Tightening Coupler Elbow for Sputter Resistance (NKL0640-02)

Brass Tightening Coupler Elbow for Sputter Resistance NKL0640-02
  • On Sale Till 31/03/2025

Special brass is used for metal body to greatly improve corrosion resistance to water.

[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

NKL0640-02

Specifications Of All Brass Compression Fitting - Elbow

Appearance of All Brass Compression Fitting - Elbow

Appearance of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Dimensional drawing of All Brass Compression Fitting - Elbow

Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)

  • *For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
  • *When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  • *The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.

Compatible Sizes

Millimeter Size (mm)ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6,
ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9,
ø16 × ø11, ø16 × ø13

Tube size (outer diameter × internal diameter)

Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2

FormatTube Outer Diameter × Internal Diameter
øD
RAL1L2E1E2CHex
H1
Hex
H2
øP1øP2Effective Cross-Sectional Area
(mm2)
Mass
(g)
NKL0425-014 × 2.5R1/88181719.510.55.58810100.913
NKL0425-02R1/411192021.51417
NKL0640-016 × 4R1/8818.817201161081010415
NKL0640-02R1/41119.820221419
NKL0640-03R3/81221.721.523.510171329
NKL0850-018 × 5R1/8822.519.523127121014148.524
NKL0850-02R1/41121.525
NKL0850-03R3/81222.124.5171331
NKL0860-018 × 6R1/8822.519.523127121014141223
NKL0860-02R1/41121.525
NKL0860-03R3/81222.124.5171330
NKL1065-0210 × 6.5R1/41127.2242814.89161417171447
NKL1065-03R3/81226.951
NKL1065-04R1/21528.627.529.52166
NKL1075-0210 × 7.5R1/41127.2242814.89161417172047
NKL1075-03R3/81226.951
NKL1075-04R1/21528.627.529.52166
NKL1280-0212 × 8R1/41127.82428.515.49171417172448
NKL1280-03R3/81227.552
NKL1280-04R1/21529.227.5302167
NKL1290-0212 × 9R1/41127.82428.515.49171417172946
NKL1290-03R3/81227.550
NKL1290-04R1/21529.227.5302165
NKL1611-0316 × 11R3/81234.92831.516.29.5231723234592
NKL1611-04R1/21535.130101
NKL1613-0316 × 13R3/81234.92831.516.29.5231723235986
NKL1613-04R1/21535.13097

Units: mm

  • *L1 dimensions are reference dimensions after tightening with screws.
Part Number
NKL0640-02
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSNominal of Thread Tube Outer Dia.
(mm)
Tube Inner Dia.
(mm)

63,729 IDR

10 Piece(s) 15 Day(s) or more -1/464

Loading...

  1. 1

Basic Information

Connection Types Screw⇔Tube Connection Screw-to-Tube Connection Shape Elbow Material Special Brass
Surface Treatment No Screw Types R

Please check the type/dimensions/specifications of the part NKL0640-02 in the Brass Tightening Coupler Elbow for Sputter Resistance series.

Products like this...

Part Number
NKL0425-01
NKL0425-02
NKL0640-01
NKL0640-03
NKL0850-01
NKL0850-03
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSNominal of Thread Tube Outer Dia.
(mm)
Tube Inner Dia.
(mm)

75,580 IDR

1 Piece(s) Same day 101/842.5

63,525 IDR

10 Piece(s) 15 Day(s) or more -1/442.5

73,151 IDR

1 Piece(s) Same day 101/864

70,683 IDR

1 Piece(s) 9 Day(s) or more -3/864

72,594 IDR

1 Piece(s) 9 Day(s) or more -1/885

75,725 IDR

10 Piece(s) 13 Day(s) or more -3/885

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)