(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Carbide Roughing Alterations End Mill
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
A roughing end mill with 4 simultaneous locations that can be specified
- TS
- General Steel
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| T-TSC-LS-RFPR5 |
| T-TSC-LS-RFPR6 |
| T-TSC-LS-RFPR8 |
| T-TSC-LS-RFPR8-6 |
| T-TSC-LS-RFPR10 |
| T-TSC-LS-RFPR10-8 |
| T-TSC-LS-RFPR12 |
| T-TSC-LS-RFPR12-10 |
| T-TSC-LS-RFPR13 |
| T-TSC-LS-RFPR14 |
| T-TSC-LS-RFPR16 |
| T-TSC-LS-RFPR18 |
| T-TSC-LS-RFPR20 |
| T-TSC-RFPL6 |
| T-TSC-RFPL8 |
| T-TSC-RFPL10 |
| T-TSC-RFPL12 |
| T-TSC-RFPL16 |
| T-TSC-RFPL20 |
| T-TSC-RFPR5 |
| T-TSC-RFPR6 |
| T-TSC-RFPR8 |
| T-TSC-RFPR9 |
| T-TSC-RFPR10 |
| T-TSC-RFPR11 |
| T-TSC-RFPR12 |
| T-TSC-RFPR13 |
| T-TSC-RFPR14 |
| T-TSC-RFPR16 |
| T-TSC-RFPR18 |
| T-TSC-RFPR20 |
| T-TSC-RFPS5 |
| T-TSC-RFPS6 |
| T-TSC-RFPS7 |
| T-TSC-RFPS8 |
| T-TSC-RFPS9 |
| T-TSC-RFPS10 |
| T-TSC-RFPS12 |
| T-TSC-RFPS13 |
| T-TSC-RFPS14 |
| T-TSC-RFPS16 |
| T-TSC-RFPS18 |
| T-TSC-RFPS20 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Work Material | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (Pieces) | Processing Applications | Geometry | Torsion Angle (θ) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,292,689 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 5 | 15 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 100 | ±0.06 | 1 | |
895,921 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 6 | 15 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 100 | ±0.06 | 2 | |
1,138,289 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 8 | 20 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 100 | ±0.06 | 2 | |
1,492,722 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 8 | 20 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 100 | ±0.06 | 3 | |
1,661,249 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 10 | 25 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 100 | ±0.06 | 2 | |
1,638,756 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 10 | 25 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 100 | ±0.06 | 3 | |
1,711,486 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 12 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 125 | ±0.06 | 2 | |
2,046,545 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 12 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 100 | ±0.06 | 2 | |
4,224,350 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 13 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 125 | ±0.06 | 3 | |
1,964,976 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 14 | 35 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 125 | ±0.06 | 3 | |
2,705,742 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 16 | 40 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 125 | ±0.06 | 2 | |
3,666,679 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 18 | 45 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 125 | ±0.06 | 2 | |
4,476,747 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 20 | 45 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 20 | 150 | ±0.06 | 2 | |
1,301,036 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 6 | 25 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 100 | 0 ~ -0.058 | - | |
1,356,220 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 8 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 100 | 0 ~ -0.058 | - | |
1,490,095 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 10 | 35 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 100 | 0 ~ -0.07 | - | |
1,992,374 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 12 | 40 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 125 | 0 ~ -0.07 | - | |
3,117,498 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 16 | 55 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 125 | 0 ~ -0.07 | - | |
4,621,394 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 20 | 65 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 20 | 150 | 0 ~ -0.084 | - | |
867,234 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 5 | 15 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 60 | ±0.06 | 1 | |
740,894 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 6 | 15 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 60 | ±0.06 | 2 | |
895,026 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 8 | 20 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 75 | ±0.06 | 2 | |
1,417,939 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 9 | 20 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 75 | ±0.06 | 1 | |
1,071,122 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 10 | 25 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 75 | ±0.06 | 2 | |
1,514,006 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 11 | 25 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 75 | ±0.06 | 1 | |
1,248,590 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 12 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 100 | ±0.06 | 2 | |
3,232,429 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 13 | 30 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 100 | ±0.06 | 3 | |
1,907,117 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 14 | 35 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 100 | ±0.06 | 3 | |
1,948,026 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 16 | 40 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 110 | ±0.06 | 2 | |
2,715,634 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 18 | 45 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 110 | ±0.06 | 3 | |
2,996,979 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 20 | 45 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 20 | 130 | ±0.06 | 2 | |
655,624 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 5 | 10 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 57 | 0 ~ -0.048 | 1 | |
652,723 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 6 | 12 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 6 | 57 | 0 ~ -0.058 | 2 | |
953,864 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 7 | 14 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 66 | 0 ~ -0.058 | 1 | |
838,543 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 8 | 16 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 8 | 69 | 0 ~ -0.058 | 2 | |
1,074,772 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 9 | 18 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 69 | 0 ~ -0.058 | 1 | |
1,014,964 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 10 | 20 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 10 | 72 | 0 ~ -0.07 | 2 | |
1,258,485 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 12 | 24 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 12 | 83 | 0 ~ -0.07 | 2 | |
1,634,337 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 13 | 26 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 14 | 83 | 0 ~ -0.07 | 1 | |
1,778,720 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 14 | 26 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 14 | 83 | 0 ~ -0.07 | 2 | |
1,931,494 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 16 | 32 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 16 | 92 | 0 ~ -0.07 | 2 | |
2,495,207 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 18 | 32 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 18 | 92 | 0 ~ -0.084 | 2 | |
2,757,264 IDR | 1 Piece(s) | Available | 12 Day(s) or more | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | 20 | 38 | 4 | Flat Surface / Side Surface / Inclined Cutting | Ultra-Small R | Weak Helix (15 to 25°) | 20 | 104 | 0 ~ -0.084 | 2 |
Loading...
Specifications
■ Table of Standards
Shape Specification for Blade Edge -CR
| Flute Diameter D (Selection) |
-CR 0.1 mm Increment Designation |
| 8 ~ 10 | 1.0 ~ 3.0 |
| 11 ~ 16 8 ~ 10 11 ~ 16 18 ~ 20 |
|
| 18 ~ 20 |
[ ! ]For the standards for the blade length (ℓ) and total length (L), refer to the page for the relevant model number.
[ ! ]The blade length (ℓ) and total length (L) are shorter by approximately D x 0.5 (up to 5 mm).
Shank Additional Processing -KN / -LC
| Flute Diameter D |
Length Under Neck Specification -KN 1 mm Increment Designation |
Total Length Specification -LC 1 mm Increment Designation |
| 5 | KN ≥ ℓ + 5 and KN ≤ L - 3d and KN ≤ ℓ + 50 |
LC ≥ ℓ + 10 + 3d |
| 6 | ||
| 7 | ||
| 8 | ||
| 9 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | ||
| 14 | ||
| 16 | ||
| 18 | ||
| 20 |
[ ! ]For the standards for the blade length (ℓ), total length (L), and shank diameter (d), refer to the page for the relevant model number.
[ ! ]When used together, specify the length under neck (KN) and the total length (LC) such that they are in the range given by LC ≥ KN + 3d + 5.
[ ! ]Specifying the length under neck (KN) indicates that the shank clearance diameter will be the blade diameter less 0.2 ~ 0.5 mm.
Specifications/Overview
| Applicable Model Number | Blade length l | |
| TSC-RFPS | Short | Click here for product details |
| TSC-RFPR | Regular | Click here for product details |
| TSC-RFPL | Long | Click here for product details |
| TSC-LS-RFPR | Regular (Long Shank) | Click here for product details |
| TSC-HRFPS | Short (45° Torsion) | Click here for product details |
| TSC-HRFPR | Regular (45° Torsion) | Click here for product details |
| TSC-HRFPL | Long (45° Torsion) | Click here for product details |
| TSC-LS-HRFPR | Regular (Long Shank 45°) | Click here for product details |
Alterations
Basic Information
| Model | Roughing | Coating | For High Hardness (Silicone-Based) |
|---|
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(Pieces)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
Geometry
- C Surface
- Ultra-Small R
-
Torsion Angle (θ)
- Weak Helix (15 to 25°)
- Powerful Helix (45° to 60°)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
type
- T-TSC-HRFPL
- T-TSC-HRFPR
- T-TSC-HRFPS
- T-TSC-LS-HRFPR
- T-TSC-LS-RFPR
- T-TSC-RFPL
- T-TSC-RFPR
- T-TSC-RFPS
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Aluminum
- Copper
Days to Ship
-
- All
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy