(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

XAL series carbide ball end mill, 2-flute / short model

Click this image to zoom it.

Move the mouse over the image to zoom

On Sale Till 31/03/2025
Volume Discount

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

XAL
General Steel
2 Flutes

Part Number

Configured Part Number is shown.

Drawing
Part Numbers
Specification and price
Features and Example
Catalog

XAL series carbide ball end mill, 2-flute / short model:Related Image

: 30; 45; 60

Part Number
SN-XAL-BEM2S3-[17-72/1]-12
SN-XAL-BEM2S3.5-[17-36/1]-12
SN-XAL-BEM2S4-[19-76/1]-14
SN-XAL-BEM2S4.5-[19-40/1]-14
SN-XAL-BEM2S5-10-100-[23-70/1]-18
SN-XAL-BEM2S5-[20-40/1]-15
SN-XAL-BEM2S5.5-[20-50/1]-15
SN-XAL-BEM2S6-12-110-[30-74/1]-25
SN-XAL-BEM2S6-[30-45/1]-25
SN-XAL-BEM2S8-[35-92/1]-30
SN-XAL-BEM2S10-[43-100/1]-38
SNR-XAL-BEM2S3-[17-72/1]-[5-12/1]
SNR-XAL-BEM2S3.5-[17-36/1]-[5-12/1]
SNR-XAL-BEM2S4-[19-76/1]-[5-14/1]
SNR-XAL-BEM2S4.5-[19-40/1]-[5-14/1]
SNR-XAL-BEM2S5-10-100-[23-70/1]-[5-18/1]
SNR-XAL-BEM2S5-[20-40/1]-[5-15/1]
SNR-XAL-BEM2S5.5-[20-50/1]-[5-15/1]
SNR-XAL-BEM2S6-12-110-[30-74/1]-[5-25/1]
SNR-XAL-BEM2S6-[30-45/1]-[5-25/1]
SNR-XAL-BEM2S8-[35-92/1]-[10-30/1]
XAL-BEM2S0.05
XAL-BEM2S0.1
XAL-BEM2S0.1-6
XAL-BEM2S0.2
XAL-BEM2S0.2-3
XAL-BEM2S0.2-6
XAL-BEM2S0.3
XAL-BEM2S0.3-3
XAL-BEM2S0.3-6
XAL-BEM2S0.4
XAL-BEM2S0.4-3
XAL-BEM2S0.4-6
XAL-BEM2S0.5
XAL-BEM2S0.5-6
XAL-BEM2S0.6
XAL-BEM2S0.7
XAL-BEM2S0.8
XAL-BEM2S0.9
XAL-BEM2S0.15
XAL-BEM2S0.25
XAL-BEM2S0.25-3
XAL-BEM2S0.35
XAL-BEM2S0.45
XAL-BEM2S0.55
XAL-BEM2S0.65
XAL-BEM2S0.75
XAL-BEM2S0.75-6
XAL-BEM2S0.85
XAL-BEM2S1
XAL-BEM2S1-4-60
XAL-BEM2S1-6
XAL-BEM2S1.05
XAL-BEM2S1.1
XAL-BEM2S1.2
XAL-BEM2S1.3
XAL-BEM2S1.4
XAL-BEM2S1.5
XAL-BEM2S1.5-6-60
XAL-BEM2S1.6

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	R Size (mm)	Model	Work Material	Flute Length (ℓ) (mm)	Number of Flutes (sheet)	Coating	Overall Length (L) (mm)	Shank Diameter (d) (mm)	R Precision (μm)	Processing Applications	Inventory Classification	Outer Diameter D (mm)	Torsion Availability	Figure	Length Under Neck (θ) (Degree)
-	1 Piece(s)		10 Day(s) or more	-	3	-	-	-	-	-	90	6	-	-	-	6	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	3.5	-	-	-	-	-	60	8	-	-	-	7	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	4	-	-	-	-	-	100	8	-	-	-	8	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	4.5	-	-	-	-	-	70	10	-	-	-	9	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5	-	-	-	-	-	100	10	-	-	-	10	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5	-	-	-	-	-	70	10	-	-	-	10	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5.5	-	-	-	-	-	80	12	-	-	-	11	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	6	-	-	-	-	-	110	12	-	-	-	12	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	6	-	-	-	-	-	75	12	-	-	-	12	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	8	-	-	-	-	-	140	16	-	-	-	16	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	10	-	-	-	-	-	160	20	-	-	-	20	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	3	-	-	-	-	-	90	6	-	-	-	6	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	3.5	-	-	-	-	-	60	8	-	-	-	7	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	4	-	-	-	-	-	100	8	-	-	-	8	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	4.5	-	-	-	-	-	70	10	-	-	-	9	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5	-	-	-	-	-	100	10	-	-	-	10	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5	-	-	-	-	-	70	10	-	-	-	10	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	5.5	-	-	-	-	-	80	12	-	-	-	11	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	6	-	-	-	-	-	110	12	-	-	-	12	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	6	-	-	-	-	-	75	12	-	-	-	12	-	-	-
-	1 Piece(s)		10 Day(s) or more	-	8	-	-	-	-	-	140	16	-	-	-	16	-	-	-
622,074 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.05	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.2	2	For General Steel (AlCrN etc.)	40	3	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.1	Included	1	-
354,951 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.4	2	For General Steel (AlCrN etc.)	40	3	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.2	Included	1	-
487,256 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.4	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.2	Included	1	-
205,807 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.2	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.8	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.4	Included	1	15°
297,073 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.2	-	-	0.8	-	-	40	3	-	-	-	0.4	-	-	-
302,648 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.2	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.8	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.4	Included	1	-
178,253 IDR 162,674 IDR	1 Piece(s)		Same day	-	0.3	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.2	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.6	Included	1	15°
176,215 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.3	-	-	1.2	-	-	40	3	-	-	-	0.6	-	-	-
285,840 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.3	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.2	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.6	Included	1	-
175,785 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.4	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.8	Included	1	15°
176,215 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.4	-	-	1.6	-	-	40	3	-	-	-	0.8	-	-	-
280,606 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.4	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.6	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.8	Included	1	-
171,445 IDR	1 Piece(s)		45 Day(s) or more	-	0.5	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1	Included	1	15°
219,730 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.5	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2.5	2	For General Steel (AlCrN etc.)	60	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1	Included	1	15°
224,802 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.6	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.2	Included	1	15°
257,510 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.7	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2.8	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.4	Included	1	-
265,777 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.8	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.6	Included	1	-
370,480 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.9	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.8	Included	1	-
350,949 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.15	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	0.6	2	For General Steel (AlCrN etc.)	40	3	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.3	Included	1	-
205,807 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.25	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.1	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.5	Included	1	15°
169,626 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.25	-	-	1.1	-	-	40	3	-	-	-	0.5	-	-	-
406,056 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.35	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.4	2	For General Steel (AlCrN etc.)	40	3	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.7	Included	1	-
408,811 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.45	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	1.8	2	For General Steel (AlCrN etc.)	40	3	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	0.9	Included	1	-
555,087 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.55	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2.2	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.1	Included	1	-
555,087 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.65	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	2.6	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.3	Included	1	-
185,501 IDR 159,308 IDR	1 Piece(s)		Same day	-	0.75	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.5	Included	1	15°
308,160 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.75	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.5	Included	1	-
323,639 IDR	1 Piece(s)	Available	8 Day(s) or more	-	0.85	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	1.7	Included	1	-
164,465 IDR	1 Piece(s)	Available	Same day	10	1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2	Included	1	15°
196,069 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6	2	For General Steel (AlCrN etc.)	60	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2	Included	1	15°
216,262 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	5	2	For General Steel (AlCrN etc.)	50	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2	Included	1	15°
615,704 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.05	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2.1	Included	1	-
585,396 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.1	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2.2	Included	1	-
552,332 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.2	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2.4	Included	1	-
524,777 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.3	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3.5	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2.6	Included	1	-
500,311 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.4	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3.5	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	2.8	Included	1	-
175,785 IDR	1 Piece(s)	Available	Same day	-	1.5	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6	2	For General Steel (AlCrN etc.)	50	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	3	Included	1	15°
209,589 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.5	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6	2	For General Steel (AlCrN etc.)	60	6	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	3	Included	1	15°
615,704 IDR	1 Piece(s)	Available	8 Day(s) or more	-	1.6	Bore	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4	2	For General Steel (AlCrN etc.)	40	4	±0.005	Curved Surface / Side Surface / Carving / R-Groove	Stocked Product	3.2	Included	1	-

Specifications

XAL series carbide ball end mill, 2-flute / short model:Related Image

Model Number				Shank Diameter d	Overall Length L	Outer Diameter D	Flute Length ℓ	Figure
	Tip R	Shank Diameter d	Overall Length L
	Tip R	Shank Diameter d	Overall Length L
XAL-BEM2S	0.05	-	-	3	40	0.1	0.2	1
	0.1	-	-	3	40	0.2	0.4	1
	0.1	6	-	6	50	0.2	0.4	1
	0.15	-	-	3	40	0.3	0.6	1
	0.2	-	-	4	50	0.4	0.8	1
	0.2	6	-	6	50	0.4	0.8	1
	0.25	-	-	4	50	0.5	1.1	1
	0.3	-	-	4	50	0.6	1.2	1
	0.3	6	-	6	50	0.6	1.2	1
	0.35	-	-	3	40	0.7	1.4	1
	0.4	-	-	4	50	0.8	2	1
	0.4	6	-	6	50	0.8	1.6	1
	0.45	-	-	3	40	0.9	1.8	1
	0.5	-	-	4	50	1	2	1
	0.5	6	-	6	60	1	2.5	1
	0.55	-	-	4	40	1.1	2.2	1
	0.6	-	-	4	50	1.2	3	1
	0.65	-	-	4	40	1.3	2.6	1
	0.7	-	-	4	40	1.4	2.8	1
	0.75	-	-	4	50	1.5	3	1
	0.75	6	-	6	50	1.5	3	1
	0.8	-	-	4	40	1.6	3	1
	0.85	-	-	4	40	1.7	3	1
	0.9	-	-	4	40	1.8	3	1
	1	-	-	4	50	2	4	1
	1	6	-	6	50	2	5	1
	1	4	60	4	60	2	6	1
	1.05	-	-	4	40	2.1	3	1
	1.1	-	-	4	40	2.2	3	1
	1.15	-	-	4	40	2.3	3	1
	1.2	-	-	4	40	2.4	3	1
	1.25	-	-	4	50	2.5	6	1

[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).

Model Number				Shank Diameter d	Overall Length L	Outer Diameter D	Flute Length ℓ	Figure
	Tip R	Shank Diameter d	Overall Length L
	Tip R	Shank Diameter d	Overall Length L
XAL-BEM2S	1.3	-	-	4	40	2.6	3.5	1
	1.4	-	-	4	40	2.8	3.5	1
	1.45	-	-	4	40	2.9	3.5	1
	1.5	-	-	4	50	3	6	1
	1.5	6	60	6	60	3	6	1
	1.55	-	-	4	40	3.1	4	1
	1.6	-	-	4	40	3.2	4	1
	1.65	-	-	4	40	3.3	4	1
	1.7	-	-	4	40	3.4	4	1
	1.75	-	-	4	40	3.5	5	1
	1.8	-	-	4	40	3.6	5	1
	1.9	-	-	4	40	3.8	5	1
	2	-	-	4	50	4	8	2
	2	6	-	6	70	4	8	1
	2.15	-	-	6	50	4.3	6	1
	2.2	-	-	6	50	4.4	6	1
	2.3	-	-	6	50	4.6	6	1
	2.4	-	-	6	50	4.8	6	1
	2.5	-	-	6	50	5	10	1
	2.5	6	80	6	80	5	12	1
	2.6	-	-	6	50	5.2	8	1
	2.75	-	-	6	50	5.5	8	1
	3	-	-	6	90	6	12	2
	3.5	-	-	8	60	7	12	1
	4	-	-	8	100	8	14	2
	4.5	-	-	10	70	9	14	1
	5	-	-	10	70	10	15	2
	5	10	100	10	100	10	18	2
	5.5	-	-	12	80	11	15	1
	6	-	-	12	75	12	25	2
	6	12	110	12	110	12	25	2
	7	-	-	12	80	14	15	3
	8	-	-	16	140	16	30	2
	10	-	-	20	160	20	38	2

[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).

More Information

● The XAL series exhibits stable wear-resistant performance when milling raw materials.
● It delivers high cost performance for pre-hardened steel, aluminum, and copper alloys.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

Product TOP

Configure

90 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

R Size(mm)
0.05

0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

1

1.05

1.1

1.15

1.2

1.25

1.3

1.4

1.45

1.5

1.55

1.6

1.65

1.7

1.75

1.8

1.9

2

2.15

2.2

2.3

2.4

2.5

2.6

2.75

3

3.5

4

4.5

5

5.5

6

7

8

10
Clear
Model
- Bore
Clear
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Stainless Steel
- Cast Iron
- Aluminum
- Copper
- Resin
Clear
Flute Length (ℓ)(mm)
0.2

0.4

0.6

0.8

1.1

1.2

1.4

1.6

1.8

2

2.2

2.5

2.6

2.8

3

3.5

4

5

6

8

10

12

14

15

18

25

30

38
Clear
Number of Flutes(sheet)
2
Clear
Coating
- For General Steel (AlCrN etc.)
Clear
Overall Length (L)(mm)
40

50

60

70

75

80

90

100

110

140

160
Clear
Shank Diameter (d)(mm)
3

4

6

8

10

12

16

20
Clear
R Precision(μm)
-0.007 ~ +0.003

±0.005

±0.01
Clear
Processing Applications
- Curved Surface
- Side Surface
- Carving
- R-Groove
Clear
Inventory Classification
- Stocked Product
Clear
type
- SN-XAL-BEM2S
- SNR-XAL-BEM2S
- XAL-BEM2S
Clear

Days to Ship

All

Same day

8 Day(s) or Less

10 Day(s) or Less

45 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Cutting Tool/Industrial Processing Part: Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

XAL series carbide ball end mill, 2-flute / short model

Specifications

More Information

Configure

Specification/Dimensions

R Size(mm)

Model

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Coating

Overall Length (L)(mm)

Shank Diameter (d)(mm)

R Precision(μm)

Processing Applications

Inventory Classification

type

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

XAL series carbide ball end mill, 2-flute / short model

Specifications

More Information

Configure

Specification/Dimensions

R Size(mm)

Model

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Coating

Overall Length (L)(mm)

Shank Diameter (d)(mm)

R Precision(μm)

Processing Applications

Inventory Classification

type

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB