(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

TSC series carbide long neck square end mill, 2-flute / long neck model

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

TS
General Steel
2 Flutes

Part Number

Configured Part Number is shown.

Drawing
Part Numbers
Specification and price
Features and Example

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

: 30; 45; 60

1
2
3
4
Next >>

Part Number
LN-TSC-PEM2S1.5-[8-20/1]
LN-TSC-PEM2S1.6-[9-20/1]
LN-TSC-PEM2S1.8-[9-20/1]
LN-TSC-PEM2S2-[9-21/1]
LN-TSC-PEM2S2.5-[10-22/1]
LN-TSC-PEM2S3-[11-21/1]
LN-TSC-PEM2S4-[13-23/1]
LN-TSC-PEM2S5-[15-25/1]
TSC-PEM2LB0.1-0.3
TSC-PEM2LB0.1-0.5
TSC-PEM2LB0.1-1
TSC-PEM2LB0.2-0.5
TSC-PEM2LB0.2-1
TSC-PEM2LB0.2-1.5
TSC-PEM2LB0.2-2
TSC-PEM2LB0.2-3
TSC-PEM2LB0.2-4
TSC-PEM2LB0.3-1
TSC-PEM2LB0.3-1.5
TSC-PEM2LB0.3-2
TSC-PEM2LB0.3-2.5
TSC-PEM2LB0.3-3
TSC-PEM2LB0.3-4
TSC-PEM2LB0.3-5
TSC-PEM2LB0.3-6
TSC-PEM2LB0.3-9
TSC-PEM2LB0.4-1
TSC-PEM2LB0.4-2
TSC-PEM2LB0.4-3
TSC-PEM2LB0.4-4
TSC-PEM2LB0.4-5
TSC-PEM2LB0.4-6
TSC-PEM2LB0.4-7
TSC-PEM2LB0.4-8
TSC-PEM2LB0.4-9
TSC-PEM2LB0.4-10
TSC-PEM2LB0.4-12
TSC-PEM2LB0.5-1
TSC-PEM2LB0.5-2
TSC-PEM2LB0.5-3
TSC-PEM2LB0.5-4
TSC-PEM2LB0.5-4-6
TSC-PEM2LB0.5-5
TSC-PEM2LB0.5-6
TSC-PEM2LB0.5-7
TSC-PEM2LB0.5-8
TSC-PEM2LB0.5-9
TSC-PEM2LB0.5-10
TSC-PEM2LB0.5-12
TSC-PEM2LB0.5-15
TSC-PEM2LB0.6-2
TSC-PEM2LB0.6-3
TSC-PEM2LB0.6-4
TSC-PEM2LB0.6-4-6
TSC-PEM2LB0.6-6
TSC-PEM2LB0.6-7
TSC-PEM2LB0.6-8
TSC-PEM2LB0.6-10
TSC-PEM2LB0.6-12
TSC-PEM2LB0.6-15

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Geometry	Torsion Angle (θ)	Additional Classification	Figure	● Inventory Product □ Manufacturer Product	Under Neck Diameter d1 (mm)	Actual Effective Length Depends on Work Inclination Angle 30' (mm)	Actual Effective Length Depends on Work Inclination Angle 1° (mm)	Actual Effective Length Depends on Work Inclination Angle 2° (mm)	Actual Effective Length Depends on Work Inclination Angle 3° (mm)	Length Under Neck (θ)
-	1 Piece(s)		10 Day(s) or more	1.5	3	4	40	8 ～ 20	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	1.45	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	1.6	3.2	4	40	9 ～ 20	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	1.55	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	1.8	3.6	4	40	9 ～ 20	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	1.75	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	2	4	4	40	9 ～ 21	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	1.95	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	2.5	5	4	40	10 ～ 22	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	2.4	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	3	6	6	45	11 ～ 21	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	2.9	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	4	8	6	45	13 ～ 23	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	3.8	-	-	-	-	-
-	1 Piece(s)		10 Day(s) or more	5	10	6	45	15 ～ 25	Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk	Sharp Corner	Standard Helix (30 to 40°)	Manufactured Product	3	□	4.8	-	-	-	-	-
635,530 IDR	1 Piece(s)	Available	8 Day(s) or more	0.1	0.2	4	50	0.3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.085	0.31	0.33	0.37	0.41	10°
698,070 IDR	1 Piece(s)	Available	8 Day(s) or more	0.1	0.2	4	50	0.5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.085	0.52	0.55	0.61	0.69	10°
868,785 IDR	1 Piece(s)	Available	8 Day(s) or more	0.1	0.2	4	50	1	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.085	1.05	1.1	1.22	1.37	10°
417,489 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	0.5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	0.52	0.55	0.61	0.69	10°
451,294 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	1	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	1.05	1.1	1.22	1.37	10°
547,639 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	1.5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	1.57	1.65	1.83	2.06	10°
615,248 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	2	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	2.09	2.2	2.44	2.75	10°
635,530 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	3.14	3.3	3.66	4.12	10°
765,680 IDR	1 Piece(s)	Available	8 Day(s) or more	0.2	0.3	4	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.18	4.19	4.4	4.88	5.49	10°
368,472 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	1	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	1.05	1.1	1.22	1.37	10°
368,472 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	1.5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	1.57	1.65	1.83	2.06	10°
451,294 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	2	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	2.09	2.2	2.44	2.75	10°
471,577 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	2.5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	2.62	2.75	3.05	3.43	10°
471,577 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	3.14	3.3	3.66	4.12	10°
539,188 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	4.19	4.4	4.88	5.49	10°
655,614 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	5.24	5.49	6.1	6.87	10°
601,726 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	6	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	6.28	6.59	7.32	8.24	10°
635,530 IDR	1 Piece(s)	Available	8 Day(s) or more	0.3	0.45	4	50	9	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	9.42	9.89	10.98	12.36	10°
265,369 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	1	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	1.05	1.1	1.22	1.37	10°
265,369 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	2	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	2.09	2.2	2.44	2.75	10°
265,369 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	3.14	3.3	3.66	4.12	10°
265,369 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	4.19	4.4	4.88	5.49	10°
265,369 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	5.24	5.49	6.1	6.87	10°
334,669 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	6	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	6.28	6.59	7.32	8.24	10°
540,715 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	7	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	7.33	7.69	8.54	9.61	10°
581,443 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	8	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	8.38	8.79	9.76	10.98	10°
581,443 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	9	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	9.42	9.89	10.98	12.36	10°
804,677 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	10	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	10.47	10.99	12.21	13.73	10°
804,677 IDR	1 Piece(s)	Available	8 Day(s) or more	0.4	0.6	4	50	12	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.37	12.57	13.19	14.65	16.48	10°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	1	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	1.05	1.1	1.22	1.37	10°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	2	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	2.09	2.2	2.44	2.75	10°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	3.14	3.3	3.66	4.12	10°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	4.19	4.4	4.88	5.49	10°
609,600 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	6	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	4.13	4.26	4.56	4.91	15°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	5	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	5.24	5.49	6.1	6.87	10°
190,997 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	6	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	6.28	6.59	7.32	8.24	10°
321,146 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	7	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	7.33	7.69	8.54	9.61	10°
321,146 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	8	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	8.38	8.79	9.76	10.98	10°
403,224 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	9	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	9.42	9.89	10.98	12.36	10°
321,146 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	10	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	10.47	10.99	12.21	13.73	10°
407,633 IDR	1 Piece(s)	Available	8 Day(s) or more	0.5	0.7	4	50	12	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	12.57	13.19	14.65	16.48	10°
410,729 IDR	1 Piece(s)	Available	Same day	0.5	0.7	4	50	15	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.46	15.71	16.48	18.31	20.6	10°
204,519 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	2	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	2.09	2.2	2.44	2.75	10°
204,519 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	3	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	3.14	3.3	3.66	4.12	10°
204,519 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	4.19	4.4	4.88	5.49	10°
586,730 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	6	50	4	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	4.13	4.26	4.56	4.91	15°
204,519 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	6	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	6.28	6.59	7.32	8.24	10°
258,607 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	7	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	7.33	7.69	8.54	9.61	10°
334,669 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	8	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	8.38	8.79	9.76	10.98	10°
381,994 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	10	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	10.47	10.99	12.21	13.73	10°
431,011 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	12	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	12.57	13.19	14.65	16.48	10°
499,386 IDR	1 Piece(s)	Available	8 Day(s) or more	0.6	0.9	4	50	15	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.56	15.71	16.48	18.31	20.6	10°

1
2
3
4
Next >>

Specifications

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.1	0.3	-	4	No Standards	●	0.2	0.085	50	10°	0.31	0.33	0.37	0.41	1
	0.5			No Standards	●					0.52	0.55	0.61	0.69
	1			No Standards	●					1.05	1.10	1.22	1.37
0.2	0.5	-	4	No Standards	●	0.3	0.18	50	10°	0.52	0.55	0.61	0.69	1
	1			●	●					1.05	1.10	1.22	1.37
	1.5			●	●					1.57	1.65	1.83	2.06
	2			No Standards	●					2.09	2.20	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			No Standards	●					3.14	3.30	3.66	4.12
	3.5			No Standards	●					3.66	3.85	4.27	4.81
	4			No Standards	●					4.19	4.40	4.88	5.49
0.3	1	-	4	●	●	0.45	0.28	50	10°	1.05	1.10	1.22	1.37	1
	1.5			No Standards	●					1.57	1.65	1.83	2.06
	2			●	●					2.09	2.20	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			●	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	5			●	●					5.24	5.49	6.10	6.87
	6			No Standards	●					6.28	6.59	7.32	8.24
	9			No Standards	●					9.42	9.89	10.98	12.36
0.4	1	-	4	No Standards	●	0.6	0.37	50	10°	1.05	1.10	1.22	1.37	1
	2	-	4	●	●				10°	2.09	2.20	2.44	2.75
	2	6	6	●	●				15°	2.06	2.13	2.28	2.45
	3	-	4	●	●				10°	3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	5			●	●					5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			No Standards	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	1	-	4	No Standards	●	0.7	0.46	50	10°	1.05	1.10	1.22	1.37	1
	2			●	●					2.09	2.20	2.44	2.75
	3			No Standards	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	5	-	4	No Standards	●				10°	5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.60
0.6	2	-	4	●	●	0.9	0.56	50	10°	2.09	2.20	2.44	2.75	1
	3			No Standards	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	6	-	4	●	●				10°	6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.60
	18			No Standards	●			70		18.85	19.78	21.97	24.71
0.7	2	-	4	●	●	1.05	0.66	50	10°	2.09	2.20	2.44	2.75	1
	4			●	●					4.19	4.40	4.88	5.49
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
0.8	4	-	4	●	●	1.2	0.76	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	20			No Standards	●			70		20.94	21.98	24.41	27.46
	24			No Standards	●			70		25.13	26.38	29.29	Without Interference
0.9	4	-	4	No Standards	●	1.35	0.85	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	15			No Standards	●					15.71	16.48	18.31	20.60
1	3	-	4	No Standards	●	1.5	0.95	50	10°	3.14	3.30	3.66	4.12	1
	4			●	●					4.19	4.40	4.88	5.49
	5			No Standards	●					5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	6	6	6	●	●				15°	6.19	6.39	6.84	7.36
	7	-	4	No Standards	●				10°	7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	22			No Standards	●					23.04	24.18	26.85	Without Interference
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
1.2	6	-	4	●	●	1.8	1.15	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	16			●	●					16.75	17.58	19.53	21.97

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1.4	6	-	4	No Standards	●	2.1	1.35	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
1.5	4	-	4	No Standards	●	2.3	1.45	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			●	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
	30			No Standards	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
1.6	6	-	4	No Standards	●	2.4	1.55	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	26			No Standards	●					27.22	28.57	31.73	Without Interference
1.8	6	-	4	No Standards	●	2.7	1.75	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
2	6	-	4	●	●	3	1.95	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	10	6	6	●	●				15°	10.31	10.65	11.40	12.27
	12	-	4	●	●				10°	12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	Without Interference
	18			●	●			70		18.85	19.78	21.97	Without Interference
	20			●	●					20.94	21.98	24.41	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
	60			No Standards	●					62.83	Without Interference	Without Interference	Without Interference
2.5	8	-	4	●	●	3.8	2.4	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	Without Interference
	14			No Standards	●					14.66	15.39	17.09	Without Interference
	16			●	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	Without Interference	Without Interference
	20			●	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	40			No Standards	●			100		41.88	Without Interference	Without Interference	Without Interference
	50			No Standards	●			100		52.35	Without Interference	Without Interference	Without Interference

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
3	8	-	6	●	●	4.5	2.9	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●			70		14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●					18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
	40			●	●			100		41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
4	12	-	6	●	●	6	3.8	50	10°	12.57	13.19	14.65	16.48	1
	16			●	●			50		16.75	17.58	19.53	Without Interference
	20			●	●			70		20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			●	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	-	6	●	●	7.5	4.8	70	10°	16.75	17.58	Without Interference	Without Interference	1
	20			No Standards	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			No Standards	●					31.41	Without Interference	Without Interference	Without Interference
	35			●	●			100		36.65	Without Interference	Without Interference	Without Interference
	40			No Standards	●					41.88	Without Interference	Without Interference	Without Interference
	50			●	●					52.35	Without Interference	Without Interference	Without Interference
6	20	-	6	●	●	9	5.8	70	10°	Without Interference	Without Interference	Without Interference	Without Interference	2
	30			●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40			●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50			●	●					Without Interference	Without Interference	Without Interference	Without Interference
	60			●	●					Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

Outer Diameter D	Length Under Neck ℓ1 1 mm Increment Designation	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Figure
1.5	8 ~ 20	4	●	●	3	1.45	40	3
1.6	9 ~ 20	4	●	●	3.2	1.55	40	3
1.8	9 ~ 20	4	●	●	3.6	1.75	40	3
2	9 ~ 21	4	●	●	4	1.95	40	3
2.5	10 ~ 22	4	●	●	5	2.4	40	3
3	11 ~ 21	6	●	●	6	2.9	45	3
4	13 ~ 23	6	●	●	8	3.8	45	3
5	15 ~ 25	6	●	●	10	4.8	45	3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

More Information

● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Basic Information

Work Material	General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy	Number of Flutes(sheet)	2	Model	Long Neck Square
Coating	For High Hardness (Silicone-Based)	Tolerance of OD(mm)	0 ~ -0.02

Configure

199 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Outer Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

3

4

5

6
Clear
Flute Length (ℓ)(mm)
0.2

0.3

0.45

0.6

0.7

0.9

1.05

1.2

1.35

1.5

1.8

2.1

2.3

2.4

2.7

3

3.2

3.6

3.8

4

4.5

5

6

7.5

8

9

10
Clear
Shank Diameter (d)(mm)
4

6
Clear
Overall Length (L)(mm)
40

45

50

70

100
Clear
Length Under Neck (ℓ1)(mm)
0.3

0.5

1

1.5

2

2.5

3

4

5

6

7

8

9

10

12

14

15

16

18

20

22

24

25

26

30

35

40

45

50

60
[8-25/1mm Unit(s)]
Clear
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
- Countersunk
Clear
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
Clear
Additional Classification
- Manufactured Product
- Stocked Product
Clear
type
- LN-TSC-EM2S
- LN-TSC-PEM2S
- TSC-EM2LB
- TSC-PEM2LB
Clear
Geometry
- Sharp Corner
- With Lead
Clear

Days to Ship

All

Same day

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Cutting Tool/Industrial Processing Part: Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

TSC series carbide long neck square end mill, 2-flute / long neck model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Torsion Angle (θ)

Additional Classification

type

Geometry

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

TSC series carbide long neck square end mill, 2-flute / long neck model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Torsion Angle (θ)

Additional Classification

type

Geometry

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB