(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
TSC series carbide long neck square end mill, 2-flute / long neck model (Part Numbers)
- Volume Discount
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
- TS
- General Steel
- 2 Flutes
Part Number
Configured Part Number is shown.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
478,339 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.8 | 1.2 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 20.94 | 21.98 | 24.41 | 27.46 | 10° | |
525,665 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.8 | 1.2 | 4 | 70 | 24 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 25.13 | 26.38 | 29.29 | Without Interference | 10° | |
258,607 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.9 | 1.35 | 4 | 50 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
258,607 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.9 | 1.35 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
258,607 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.9 | 1.35 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
258,607 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.9 | 1.35 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
491,860 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 0.9 | 1.35 | 4 | 50 | 15 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 15.71 | 16.48 | 18.31 | 20.6 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 3 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 5 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
424,251 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 6 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.19 | 6.39 | 6.84 | 7.36 | 15° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 7 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 7.33 | 7.69 | 8.54 | 9.61 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
215,036 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 9 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 9.42 | 9.89 | 10.98 | 12.36 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
204,519 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
205,668 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
334,669 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
334,669 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 18.85 | 19.78 | 21.97 | 24.71 | 10° | |
334,669 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 20.94 | 21.98 | 24.41 | 27.46 | 10° | |
426,094 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 70 | 22 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 23.04 | 24.18 | 26.85 | Without Interference | 10° | |
381,994 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 70 | 25 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
431,011 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1 | 1.5 | 4 | 70 | 30 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 31.41 | 32.97 | 36.62 | Without Interference | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.2 | 1.8 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.2 | 1.8 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.2 | 1.8 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.2 | 1.8 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
341,429 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.2 | 1.8 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.4 | 2.1 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.4 | 2.1 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.4 | 2.1 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.4 | 2.1 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
288,327 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.4 | 2.1 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
258,607 IDR | 1 Piece(s) | Available | Same day | 1.4 | 2.1 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 4 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 18.85 | 19.78 | 21.97 | 24.71 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
334,669 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 70 | 25 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
334,669 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 70 | 30 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 31.41 | 32.97 | Without Interference | Without Interference | 10° | |
375,234 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 100 | 35 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 36.65 | 38.46 | Without Interference | Without Interference | 10° | |
424,251 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 100 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 41.88 | 43.96 | Without Interference | Without Interference | 10° | |
424,251 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.5 | 2.3 | 4 | 100 | 45 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 47.12 | 49.45 | Without Interference | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
228,813 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
281,439 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
281,439 IDR | 1 Piece(s) | Available | Same day | 1.6 | 2.4 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
281,439 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 18.85 | 19.78 | 21.97 | Without Interference | 10° | |
281,439 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
348,189 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.6 | 2.4 | 4 | 70 | 26 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 27.22 | 28.57 | 31.73 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
260,774 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 16.75 | 17.58 | 19.53 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 18.85 | 19.78 | 21.97 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
314,385 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 1.8 | 2.7 | 4 | 70 | 25 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 6 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
398,945 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 6 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 10.31 | 10.65 | 11.4 | 12.27 | 15° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 16.75 | 17.58 | 19.53 | Without Interference | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 18.85 | 19.78 | 21.97 | Without Interference | 10° | |
219,849 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
218,041 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 70 | 25 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 26.18 | 27.47 | Without Interference | Without Interference | 10° | |
265,369 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 70 | 30 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 31.41 | 32.97 | Without Interference | Without Interference | 10° | |
321,146 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 100 | 35 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 36.65 | 38.46 | Without Interference | Without Interference | 10° | |
402,277 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 100 | 40 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 41.88 | 43.96 | Without Interference | Without Interference | 10° | |
485,100 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 100 | 50 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 52.35 | 54.95 | Without Interference | Without Interference | 10° | |
581,443 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2 | 3 | 4 | 100 | 60 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 62.83 | Without Interference | Without Interference | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 8 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 10 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 12 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 12.57 | 13.19 | 14.65 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 14 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 14.66 | 15.39 | 17.09 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 16 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 16.75 | 17.58 | 19.53 | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 70 | 18 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 18.85 | 19.78 | Without Interference | Without Interference | 10° | |
224,802 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 70 | 20 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 20.94 | 21.98 | Without Interference | Without Interference | 10° | |
245,085 IDR | 1 Piece(s) | Available | 8 Day(s) or more | 2.5 | 3.8 | 4 | 70 | 25 | Flat Surface / Side Surface / Groove / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 26.18 | 27.47 | Without Interference | Without Interference | 10° |
Loading...
Specifications
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
| 0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
| 1 | No Standards | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
| 1 | ● | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | No Standards | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
| 4 | No Standards | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | ● | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2 | 6 | 6 | ● | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
| 3 | - | 4 | ● | ● | 10° | 3.14 | 3.30 | 3.66 | 4.12 | |||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.10 | 6.87 | |||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
| 24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
| 0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.30 | 3.66 | 4.12 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | No Standards | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
| 7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
| 1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.40 | 12.27 | |||||
| 12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
| 2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
| 50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
| 25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
| 6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | 10° | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
| 1.5 | 8 ~ 20 | 4 | ● | ● | 3 | 1.45 | 40 | 3 |
| 1.6 | 9 ~ 20 | 4 | ● | ● | 3.2 | 1.55 | 40 | 3 |
| 1.8 | 9 ~ 20 | 4 | ● | ● | 3.6 | 1.75 | 40 | 3 |
| 2 | 9 ~ 21 | 4 | ● | ● | 4 | 1.95 | 40 | 3 |
| 2.5 | 10 ~ 22 | 4 | ● | ● | 5 | 2.4 | 40 | 3 |
| 3 | 11 ~ 21 | 6 | ● | ● | 6 | 2.9 | 45 | 3 |
| 4 | 13 ~ 23 | 6 | ● | ● | 8 | 3.8 | 45 | 3 |
| 5 | 15 ~ 25 | 6 | ● | ● | 10 | 4.8 | 45 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
More Information
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining. 
Basic Information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Tolerance of OD(mm) | 0 ~ -0.02 |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
[8-25/1mm Unit(s)]
-
Geometry
- Sharp Corner
- With Lead
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
type
- LN-TSC-EM2S
- LN-TSC-PEM2S
- TSC-EM2LB
- TSC-PEM2LB
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
- Countersunk
Days to Ship
-
- All
- Same day
- 8 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Cutting Tool/Industrial Processing Part
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy