(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

TS
General Steel
3 Flutes
R (Regular)

Part Number

Configured Part Number is shown.

Drawing
Part Numbers
Specification and price
Features and Example

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model:Related Image

: 30; 45; 60

Part Number
SN-TSC-HEM3R6-[26-42/1]-21
SN-TSC-HEM3R6.5-[28-46/1]-23
SN-TSC-HEM3R7-[29-36/1]-24
SN-TSC-HEM3R7.5-[29-36/1]-24
SN-TSC-HEM3R8-[31-51/1]-26
SN-TSC-HEM3R9-[31-50/1]-26
SN-TSC-HEM3R10-[39-60/1]-34
SN-TSC-HEM3R11-[39-70/1]-34
SN-TSC-HEM3R12-[43-70/1]-38
SN-TSC-HEM3R16-[53-78/1]-48
SN-TSC-HEM3R20-[61-92/1]-56
SN-TSC-HPEM3R6-[26-42/1]-21
SN-TSC-HPEM3R6.5-[28-46/1]-23
SN-TSC-HPEM3R7-[29-36/1]-24
SN-TSC-HPEM3R7.5-[29-36/1]-24
SN-TSC-HPEM3R8-[31-51/1]-26
SN-TSC-HPEM3R9-[31-50/1]-26
SN-TSC-HPEM3R10-[39-60/1]-34
SN-TSC-HPEM3R11-[39-70/1]-34
SN-TSC-HPEM3R12-[43-70/1]-38
SN-TSC-HPEM3R16-[53-78/1]-48
SN-TSC-HPEM3R20-[61-92/1]-56
SNR-TSC-HEM3R6-[26-42/1]-[5-21/1]
SNR-TSC-HEM3R6.5-[28-46/1]-[5-23/1]
SNR-TSC-HEM3R7-[29-36/1]-[5-24/1]
SNR-TSC-HEM3R7.5-[29-36/1]-[5-24/1]
SNR-TSC-HEM3R8-[31-51/1]-[5-26/1]
SNR-TSC-HEM3R9-[31-50/1]-[5-26/1]
SNR-TSC-HEM3R10-[39-60/1]-[5-34/1]
SNR-TSC-HEM3R11-[39-70/1]-[5-34/1]
SNR-TSC-HEM3R12-[43-70/1]-[5-38/1]
SNR-TSC-HEM3R16-[53-78/1]-[5-48/1]
SNR-TSC-HEM3R20-[61-92/1]-[5-56/1]
SNR-TSC-HPEM3R6-[26-42/1]-[5-21/1]
SNR-TSC-HPEM3R6.5-[28-46/1]-[5-23/1]
SNR-TSC-HPEM3R7-[29-36/1]-[5-24/1]
SNR-TSC-HPEM3R7.5-[29-36/1]-[5-24/1]
SNR-TSC-HPEM3R8-[31-51/1]-[5-26/1]
SNR-TSC-HPEM3R9-[31-50/1]-[5-26/1]
SNR-TSC-HPEM3R10-[39-60/1]-[5-34/1]
SNR-TSC-HPEM3R11-[39-70/1]-[5-34/1]
SNR-TSC-HPEM3R12-[43-70/1]-[5-38/1]
SNR-TSC-HPEM3R16-[53-78/1]-[5-48/1]
SNR-TSC-HPEM3R20-[61-92/1]-[5-56/1]
TSC-HEM3R1
TSC-HEM3R1.5
TSC-HEM3R1.8
TSC-HEM3R2
TSC-HEM3R2.5
TSC-HEM3R2.8
TSC-HEM3R3
TSC-HEM3R3.5
TSC-HEM3R4
TSC-HEM3R4.5
TSC-HEM3R5
TSC-HEM3R5.5
TSC-HEM3R6
TSC-HEM3R6.5
TSC-HEM3R7
TSC-HEM3R7.5

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Geometry	Additional Classification	Figure	● Inventory Product □ Manufacturer Product
-	1 Piece(s)		10 Day(s) or more	6	21	6	60	26 ～ 42	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	6.5	23	8	70	28 ～ 46	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	7	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	7.5	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	8	26	8	75	31 ～ 51	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	9	26	10	80	31 ～ 50	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	10	34	10	90	39 ～ 60	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	11	34	12	100	39 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	12	38	12	100	43 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	16	48	16	110	53 ～ 78	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	20	56	20	130	61 ～ 92	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	6	21	6	60	26 ～ 42	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	6.5	23	8	70	28 ～ 46	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	7	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	7.5	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	8	26	8	75	31 ～ 51	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	9	26	10	80	31 ～ 50	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	10	34	10	90	39 ～ 60	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	11	34	12	100	39 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	1	□
-	1 Piece(s)		10 Day(s) or more	12	38	12	100	43 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	16	48	16	110	53 ～ 78	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	20	56	20	130	61 ～ 92	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Standard Neck Relief	2	□
-	1 Piece(s)		10 Day(s) or more	6	21	6	60	26 ～ 42	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	6.5	23	8	70	28 ～ 46	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	7	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	7.5	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	8	26	8	75	31 ～ 51	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	9	26	10	80	31 ～ 50	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	10	34	10	90	39 ～ 60	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	11	34	12	100	39 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	12	38	12	100	43 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	16	48	16	110	53 ～ 78	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	20	56	20	130	61 ～ 92	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	With Lead	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	6	21	6	60	26 ～ 42	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	6.5	23	8	70	28 ～ 46	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	7	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	7.5	24	8	70	29 ～ 36	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	8	26	8	75	31 ～ 51	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	9	26	10	80	31 ～ 50	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	10	34	10	90	39 ～ 60	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	11	34	12	100	39 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	1	□
-	1 Piece(s)		10 Day(s) or more	12	38	12	100	43 ～ 70	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	16	48	16	110	53 ～ 78	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
-	1 Piece(s)		10 Day(s) or more	20	56	20	130	61 ～ 92	Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk	Sharp Corner	Cutting Edge R Processing	2	□
507,510 IDR	1 Piece(s)	Available	8 Day(s) or more	1	4	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
493,551 IDR	1 Piece(s)	Available	8 Day(s) or more	1.5	6	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
510,453 IDR	1 Piece(s)	Available	8 Day(s) or more	1.8	7	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
493,551 IDR	1 Piece(s)	Available	8 Day(s) or more	2	8	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
493,551 IDR	1 Piece(s)	Available	8 Day(s) or more	2.5	10	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
510,453 IDR	1 Piece(s)	Available	8 Day(s) or more	2.8	13	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
493,551 IDR	1 Piece(s)	Available	8 Day(s) or more	3	16	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
510,453 IDR	1 Piece(s)	Available	8 Day(s) or more	3.5	18	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
512,143 IDR	1 Piece(s)	Available	8 Day(s) or more	4	18	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
549,329 IDR	1 Piece(s)	Available	8 Day(s) or more	4.5	19	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
549,329 IDR	1 Piece(s)	Available	8 Day(s) or more	5	21	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
567,922 IDR	1 Piece(s)	Available	8 Day(s) or more	5.5	21	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
569,611 IDR	1 Piece(s)	Available	8 Day(s) or more	6	21	6	60	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	2	●
665,956 IDR	1 Piece(s)	Available	8 Day(s) or more	6.5	23	8	70	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
665,956 IDR	1 Piece(s)	Available	8 Day(s) or more	7	24	8	70	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●
812,621 IDR	1 Piece(s)	Available	8 Day(s) or more	7.5	24	8	70	-	Flat Surface / Side Surface / Groove / Inclined Cutting	With Lead	Stocked Product	1	●

Specifications

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model:Related Image

Model Number		Flute Length ℓ	Overall Length L	Shank Diameter d	Figure
	Outer Diameter D
	Outer Diameter D
TSC-HEM3R (Standard) TSC-HPEM3R (Sharp Edge)	1	4	60	6	1
	1.5	6	60	6	1
	1.8	7	60	6	1
	2	8	60	6	1
	2.5	10	60	6	1
	2.8	13	60	6	1
	3	16	60	6	1
	3.5	18	60	6	1
	4	18	60	6	1
	4.5	19	60	6	1
	5	21	60	6	1
	5.5	21	60	6	1
	6	21	60	6	2
	6.5	23	70	8	1
	7	24	70	8	1
	7.5	24	70	8	1
	8	26	75	8	2
	9	26	80	10	1
	10	34	90	10	2
	11	34	100	12	1
	12	38	100	12	2
	16	48	110	16	2
	20	56	130	20	2

For Cutting Conditions, Refer to >>Click here.

More Information

● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.

Basic Information

Work Material	General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy	Number of Flutes(sheet)	3	Model	Square
Coating	For High Hardness (Silicone-Based)	Torsion Angle (θ)	Powerful Helix (45° to 60°)	Tolerance of OD(mm)	0 ~ -0.02

Configure

90 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Outer Diameter (D)(φ)
1

1.5

1.8

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

11

12

16

20
Clear
Flute Length (ℓ)(mm)
4

6

7

8

10

13

16

18

19

21

23

24

26

34

38

48

56
[5-56/1mm Unit(s)]
Clear
Shank Diameter (d)(mm)
6

8

10

12

16

20
Clear
Overall Length (L)(mm)
60

70

75

80

90

100

110

130
Clear
Length Under Neck (ℓ1)(mm)
[26-92/1mm Unit(s)]
Clear
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
Clear
Geometry
- Sharp Corner
- With Lead
Clear
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Clear
type
- SN-TSC-HEM3R
- SN-TSC-HPEM3R
- SNR-TSC-HEM3R
- SNR-TSC-HPEM3R
- TSC-HEM3R
- TSC-HPEM3R
Clear

Days to Ship

All

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Cutting Tool/Industrial Processing Part: Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Geometry

Additional Classification

type

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

Specifications

More Information

Basic Information

Configure

Specification/Dimensions

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Geometry

Additional Classification

type

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB