(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts One End Threaded, One End Tapped

Product Overview
Linear guide shaft is a high precision shaft product, which can be used in combination with linear bushing and other bushing products. In addition to excellent abrasion resistance, it offers a variety of alterations.
Dimensional Drawing
Note: When B=0 or S=0, it indicates that there is no thread.
misumi Guide Shafts One End Threaded One End Tapped Product Introduction
Specifications Overview
Type Material Hardness Surface TreatmentD (mm)L (mm)
Standard
D Tolerance g7D Tolerance f8
E-SFAD-S45C or GCr15High Frequency Quenched
For effective hardening layer depth, clickSurface Hardness Benchmark
S45C or GCr15 55HRC~
SUS440C or equivalent High hardness corrosion resistant steel 53HRC~
-4~3025~1498
E-SSFAD-SUS440C or equivalent High hardness corrosion resistant steel
E-PSFAD-S45C or GCr15Hard Chrome Plated
Plating hardness: HV750~
Plating thickness: 3μ or more 
E-PSSFAD-SUS440C or equivalent High hardness corrosion resistant steel
-E-PSFGDS45C-Hard Chrome Plated
Plating hardness: HV750~
Plating thickness: 10μ or more
The hardness of shaft end machined part (effective thread length + approx. 10mm) may be reduced due to the annealing effect of machining.
If there are requirements for rust prevention, please give priority to the hard-chrome plated products. Click Rust Prevention Method
For combination with linear bushing, please select high-frequency quenched products.
O.D. 4 and 5 are not applicable to E-PSFGD.
■Tolerance of D Part
Dg7f8
4-0.004
-0.016
-
5
6-0.010
-0.028
8-0.005
-0.020
-0.013
-0.035
10
12-0.006
-0.024
-0.016
-0.043
13
15
16
18
20-0.007
-0.028
-0.020
-0.053
25
30
Specification Table
Part Number1mm incrementsP (Coarse Thread)
Selection
N (Coarse Thread)
Selection
(Y)
Max.
TypeDLFB
Standard Type
(D Tolerance g7)
E-SFAD
E-SSFAD
E-PSFAD
E-PSSFAD

(D Tolerance f8)E-PSFGD
425~2982≤F≤P×5(When P≤6)
B≤F-2

(When P=8 or 10)
B≤F-3

(When P≥12)
B≤F-5

(When there is no thread)
B=0
B≥Thread Pitch×3
34         2            300
525~398345         2.63          400
625~7983456         3          600
825~99834568        345        800
1025~998 456810       3456       800
1225~1198  5681012       4568      1000
1325~1198  5681012       4568      1000
1525~1198  5681012       456810     1000
1625~1198  568101216      456810     1200
2025~1198   6810121620     45681012    1200
2525~1198    81012162024    4568101216   1200
3025~1498    8101216202430     6810121620  1500
O.D. 4 and 5 are not applicable to E-PSFGD.
Alterations
MISUMI Linear Guide Shafts One End Threaded One End Tapped All Models Machining
Product Features
Feature 1: Extensively applied in various precision equipment thanks to high precision dimensional tolerance.
Feature 2: Bearing steel (S45C or GCr15) with excellent wear resistance and SUS440C or equivalent high hardness corrosion resistant steel are used for high frequency quenching, maintaining the original toughness while enhancing abrasion resistance.
Feature 3: A variety of alterations are available to accommodate different environments.
Feature 4: Usually combined with linear bushing products, achieving excellent linear guiding functionality, and less abrasion even if subject to high-speed reciprocal motion, as compared with general shaft and bushing structure.
Feature 5: The surface treatment of hard-chrome plating is available, achieving excellent anti-rust performance and HV750 plating hardness, as well as less abrasion when used in combination with high-hardness workpieces.
Precautions
MISUMI High Precision Guide Shafts One End Threaded One End Tapped Selection Catalog②Reduced hardness of machined parts
 Machining is performed after quenching of base metal. The parts that may be reduced in hardness due to annealing are:
 -All threaded
 -All stepped
 -Tapped: when M≥D/2, tapped double-hole type, hard chrome plated products made of SUS440C or equivalent high hardness corrosion resistant steel
 -Adds wrench flats (SC-WSC-SX)
 -Adds screw flats (FC-WFC)
 -Adds V-grooves (VC-WVC)
 -Except for full length hardened type.
Only the shaded portion of D part is hard chrome plated.
Guide Shafts One End Threaded One End Tapped Bushing MISUMI Quality Stainless Steel Material Imported from Japan
③Plating of surface treatment
 Machining is performed after surface treatment of base metal. No electroplating treatment is applied to the following parts:
 -Groove part
 -Threaded part
 -Tapped part
 -Wrench slot, V-groove, plane, cut section
 -The inside of the tube-type guide shaft may rust without hard chrome plating.
Example of Use
Standard Linear Motion MechanismFunctions of standard linear motion mechanism
①Side-by-side use of two guide shafts effectively prevents workpiece rotation
②Improved accuracy of linear motion and load capacity.
③The combination of guide shaft and linear bushing enables high-speed reciprocal motion.
④Low operational resistance, reducing the loss of workpiece.
Example Diagram
MISUMI Guide Shafts One End Threaded One End Tapped Full Range of Selections
  
Product PictureFunctions of key workpieces in the mechanism
Linear guide shaft: Supporting the workpiece, combining with linear bushing to achieve guiding functionality.
For details, click Linear Guide Shafts

Linear bushing: Driving the workpiece to move on the guide shaft through the steel ball circulating structure.
For details, click Linear Bushings

Guide shaft support: Supporting and fixing the guide shaft for effective adjustment of shaft pitch and improved equipment stability.
For details, click Guide Shaft Posts

Stopper: Performing limit action for adjustment of effective stroke of mechanism
For details, click Stoppers
Direct-from-Manufacturer MISUMI Guide Shafts One End Threaded One End Tapped Larger Image
Application Industries
Medical Semiconductor Electronic & Electrical
MISUMI High Frequency Quenched Shafts One End Threaded One End Tapped Selection Manufacturer MISUMI Guide Shafts One End Threaded One End Tapped Details Introduction Direct-from-Manufacturer Hollow Shafts for Sliding One End Threaded One End Tapped MISUMI Model
Smart Phones Food Automotive
LINEAR SHAFT Rigid Shafts One End Threaded One End Tapped Drawing Custom Size Hollow Shafts One End Threaded One End Tapped Chrome Plated Bar Dimensional Drawing Dedicated Linear Hollow Shafts One End Threaded One End Tapped Bearing Steel Stainless Steel Full Range of Models
Related Products
Linear Bushing Standard Type Straight Type Bearings With Housings T-Shaped Shaft Collars (Clamp)
Stainless Steel Rigid Shafts Chrome Plated Bar One End Threaded One End Tapped Machining misumi Linear Hollow Shafts One End Threaded One End Tapped Sales MISUMI Guide Shafts Introduction Linear Guide Shafts One End Threaded One End Tapped Unit Mechanism Design Selection
Typical Model: LMU6 Typical Model: BGHFS6000ZZ-30 Typical Model: PSCS10-10
Advantages: High quality, affordable price, short delivery time Advantages: Full range, high precision and high quality Advantages: Matching shaft products, full range

Related Documents
For anti-rust performance of metal materials and surface treatment, click Anti-Rust Performance Table.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
E-PSFGD6-[25-598/1]-F[2-42/1]-B[0-40/1]-P[3,​4,​5,​6]-N3
E-PSFGD6-[25-598/1]-F[2-42/1]-B[0-40/1]-PMC[3,​4,​5,​6]-N3
E-PSFGD8-[25-798/1]-F[2-56/1]-B[0-53/1]-P[3,​4,​5,​6,​8]-N[3,​4,​5]
E-PSFGD8-[25-798/1]-F[2-56/1]-B[0-53/1]-PMC[3,​4,​5,​6,​8]-N[3,​4,​5]
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,​5,​6,​8,​10]-N[3,​4,​5,​6]
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,​5,​6,​8,​10]-ND6
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,​5,​6,​8,​10]-N[3,​4,​5,​6]
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,​5,​6,​8,​10]-ND6
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-N[3,​4,​5,​6]
E-PSFGD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-ND6
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]-N[4,​5,​6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]-ND[6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,​6,​8,​10,​12]-NSC8
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12]-N[4,​5,​6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12]-ND[6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,​6,​8,​10,​12]-NSC8
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12]-N[4,​5,​6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12]-ND[6,​8]
E-PSFGD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,​12]-NSC8
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-N[4,​5,​6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-ND[6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-NSC8
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]-N[4,​5,​6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]-ND[6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12]-NSC8
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]-N[4,​5,​6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]-ND[6,​8]
E-PSFGD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12]-NSC8
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-ND[6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,​6,​8,​10,​12]-NSC[8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12,​15]-N[4,​5,​6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12,​15]-ND[6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,​6,​8,​10,​12,​15]-NSC[8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12,​14]-N[4,​5,​6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12,​14]-ND[6,​8,​10]
E-PSFGD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,​12,​14]-NSC[8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]-ND[6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,​6,​8,​10,​12,​16]-NSC[8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]-N[4,​5,​6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]-ND[6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,​6,​8,​10,​12,​15]-NSC[8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]-N[4,​5,​6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]-ND[6,​8,​10]
E-PSFGD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,​12,​14]-NSC[8,​10]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,​8,​10,​12,​16,​20]-ND[6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,​8,​10,​12,​16,​20]-NSC[8,​10,​12,​14]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]-N[4,​5,​6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]-ND[6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]-NSC[8,​10,​12,​14]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMS[10,​12,​14,​18]-N[4,​5,​6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMS[10,​12,​14,​18]-ND[6,​8,​10,​12]
E-PSFGD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-PMS[10,​12,​14,​18]-NSC[8,​10,​12,​14]
E-PSFGD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]-N[4,​5,​6,​8,​10,​12,​16]
E-PSFGD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]-ND[6,​8,​10,​12,​16]
E-PSFGD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-P[8,​10,​12,​16,​20,​24]-NSC[8,​10,​12,​14,​18]
E-PSFGD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]-N[4,​5,​6,​8,​10,​12,​16]
E-PSFGD25-[25-1198/1]-F[2-168/1]-B[0-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]-ND[6,​8,​10,​12,​16]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance B
(mm)
F
(mm)
Tapped N (Coarse Thread)
(mm)
ND Changes tapped thread to fine one [NSC]
(mm)
Threaded P (Coarse Thread)
(mm)
Changes thread to fine one [PMC]
(mm)
Changes thread to fine one [PMS]
(mm)

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating625 ~ 598f80 ~ 402 ~ 423--3 ~ 6--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating625 ~ 598f80 ~ 402 ~ 423---3 ~ 6-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating825 ~ 798f80 ~ 532 ~ 563 ~ 5--3 ~ 8--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating825 ~ 798f80 ~ 532 ~ 563 ~ 5---3 ~ 8-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 703 ~ 6--4 ~ 10--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 70-6-4 ~ 10--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 703 ~ 6---4 ~ 10-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 70-6--4 ~ 10-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 703 ~ 6----10

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1025 ~ 798f80 ~ 702 ~ 70-6---10

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 844 ~ 8--5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84-6 ~ 8-5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84--85 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 844 ~ 8---5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84-6 ~ 8--5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84--8-5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 844 ~ 8----10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84-6 ~ 8---10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1225 ~ 998f80 ~ 842 ~ 84--8--10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 844 ~ 8--5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84-6 ~ 8-5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84--85 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 844 ~ 8---5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84-6 ~ 8--5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84--8-5 ~ 12-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 844 ~ 8----10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84-6 ~ 8---10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1325 ~ 998f80 ~ 792 ~ 84--8--10 ~ 12

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 844 ~ 10--5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84-6 ~ 10-5 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84--8 ~ 105 ~ 12--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 844 ~ 10---5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84-6 ~ 10--5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84--8 ~ 10-5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 844 ~ 10----10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84-6 ~ 10---10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1525 ~ 998f80 ~ 792 ~ 84--8 ~ 10--10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 1124 ~ 10--5 ~ 16--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112-6 ~ 10-5 ~ 16--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112--8 ~ 105 ~ 16--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 1124 ~ 10---5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112-6 ~ 10--5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112--8 ~ 10-5 ~ 15-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 1124 ~ 10----10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112-6 ~ 10---10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating1625 ~ 1198f80 ~ 1072 ~ 112--8 ~ 10--10 ~ 14

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 1404 ~ 12--6 ~ 20--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140-6 ~ 12-6 ~ 20--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140--8 ~ 146 ~ 20--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 1404 ~ 12---6 ~ 20-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140-6 ~ 12--6 ~ 20-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140--8 ~ 14-6 ~ 20-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 1404 ~ 12----10 ~ 18

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140-6 ~ 12---10 ~ 18

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2025 ~ 1198f80 ~ 1352 ~ 140--8 ~ 14--10 ~ 18

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2525 ~ 1198f80 ~ 1632 ~ 1684 ~ 16--8 ~ 24--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2525 ~ 1198f80 ~ 1632 ~ 168-6 ~ 16-8 ~ 24--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2525 ~ 1198f80 ~ 1632 ~ 168--8 ~ 188 ~ 24--

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2525 ~ 1198f80 ~ 1632 ~ 1684 ~ 16---8 ~ 25-

-

1 Piece(s) 14 Day(s) [Steel] S45C or GCr15Not ProvidedHard Chrome Plating2525 ~ 1198f80 ~ 1632 ~ 168-6 ~ 16--8 ~ 25-

Loading...

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) Tapped
Shaft End Perpendicularity Perpendicularity (0.2) Precision Standard

Tech Support