(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced (SHD-VUM12-70)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

MISUMI

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

The series is standardized to maintain the spring constant uniformly to the same diameter.

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SHD-VUM12-70

Drawing/Specifications
3D Preview
Part Numbers

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced

Closed Ends (Both Ends Not Ground*)

Closed Ends (Both Ends Ground)

I.D. D	ø8 or Less	+0.6 mm +0.1 mm		Free Length L	50 or Less ±1 mm
	ø10 or More	+0.8 mm +0.1 mm			60 or More ±2 mm

Type							[M] Material	Cleaning Method
Type							[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-VUY	SL-VUR	SL-VUF	SL-VUL	SL-VUT	SL-VUM	SL-VUH	SUS304-WPB Spring Constant±10%	Degreasing	General environment	Anti-rust packing	General environment
SH-VUY	SH-VUR	SH-VUF	SH-VUL	SH-VUT	SH-VUM	SH-VUH		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-VUY	SHD-VUR	SHD-VUF	SHD-VUL	SHD-VUT	SHD-VUM	SHD-VUH		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number	—	L
SL-VUR10	—	40
SHD-VUM10	—	40

■SL-VUY·SH-VUY·SHD-VUY: Fmax. (allowable deflection) = L × Fa%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.	Reference			Fa %
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.	Pitch	Solid Length	Total Coils	Fa %
SL-VUY	3	—	10	3.46	0.23	7.5	0.74 {0.08}	1.6	2	7.5	75
SH-VUY			15	3.52	0.26	11.3	1.10 {0.11}	1.6	3	10.5
SHD-VUY			20	3.58	0.29	15	1.47 {0.15}	1.4	4.7	15
			25	3.6	0.3	18.8	1.84 {0.19}	1.6	5.4	17
			30	3.64	0.32	22.5	2.21 {0.23}	1.5	7	20.75
SL-VUY	4	—	10	4.52	0.26	7.5	0.74 {0.08}	2.1	1.9	6.25	75
SH-VUY			15	4.6	0.3	11.3	1.10 {0.11}	1.9	3.1	9.25
SHD-VUY			20	4.64	0.32	15	1.47 {0.15}	1.9	4.1	11.75
			25	4.7	0.35	18.8	1.84 {0.19}	1.8	5.6	15
			30	4.7	0.35	22.5	2.21 {0.23}	2.2	5.6	15
SL-VUY	5	—	10	5.6	0.3	7.5	0.74 {0.08}	2.2	2.1	6	75
SH-VUY			15	5.64	0.32	11.3	1.10 {0.11}	2.7	2.7	7.25
SHD-VUY			20	5.7	0.35	15	1.47 {0.15}	2.6	3.6	9.25
			25	5.8	0.4	18.8	1.84 {0.19}	2.1	5.8	13.5
			30	5.8	0.4	22.5	2.21 {0.23}	2.5	5.8	13.5
			35	5.8	0.4	26.3	2.57 {0.26}	2.9	5.8	13.5
			40	5.9	0.45	30	2.94 {0.30}	2.1	9.5	20
			45	5.9	0.45	33.8	3.31 {0.34}	2.4	9.5	20
			50	5.9	0.45	37.5	3.68 {0.38}	2.7	9.5	20
SL-VUY	6	—	10	6.6	0.32	7.5	0.74 {0.08}	2.8	2	5.25	75
SH-VUY			15	6.8	0.4	9.8	0.96 {0.10}	1.8	4.2	9.5	65
SHD-VUY			20	6.8	0.4	13	1.27 {0.13}	2.5	4.2	9.5	65
			25	6.8	0.4	18.8	1.84 {0.19}	3.2	4.2	9.5	75
			30	6.9	0.45	22.5	2.21 {0.23}	2.4	6.7	13.75
			35	6.9	0.45	26.3	2.57 {0.26}	2.9	6.7	13.75
			40	6.9	0.45	30	2.94 {0.30}	3.3	6.7	13.75
			45	7	0.5	33.8	3.31 {0.34}	2.5	10.4	19.75
			50	7	0.5	37.5	3.68 {0.38}	2.7	10.4	19.75
			55	7	0.5	41.3	4.04 {0.41}	3	10.4	19.75
			60	7	0.5	45	4.41 {0.45}	3.3	10.4	19.75
SL-VUY	8	—	20	9.1	0.55	15	2.94 {0.30}	3.2	4.9	7.75	75
SH-VUY			25	9.1	0.55	18.8	3.68 {0.38}	4.1	4.9	7.75
SHD-VUY			30	9.2	0.6	22.5	4.41 {0.45}	3.4	6.8	10.25
			35	9.2	0.6	26.3	5.15 {0.53}	4	6.8	10.25
			40	9.3	0.65	30	5.88 {0.60}	3.5	9.1	13
			45	9.3	0.65	33.8	6.62 {0.68}	3.9	9.1	13
			50	9.3	0.65	37.5	7.35 {0.75}	4.4	9.1	13
			55	9.4	0.7	41.3	8.09 {0.83}	3.6	12.5	16.75
			60	9.4	0.7	45	8.82 {0.90}	3.9	12.5	16.75
			65	9.4	0.7	48.8	9.56 {0.98}	4.3	12.5	16.75
			70	9.5	0.75	52.5	10.29 {1.05}	3.5	16.7	21.25
			80	9.5	0.75	56	10.98 {1.12}	4	16.7	21.25	70
SL-VUY	10	—	20	11.3	0.65	13	2.55 {0.26}	3.1	5.7	7.75	65
SH-VUY			25	11.3	0.65	16.3	3.19 {0.33}	4	5.7	7.75	65
SHD-VUY			30	11.3	0.65	22.5	4.41 {0.45}	4.9	5.7	7.75	75
			35	11.4	0.7	26.3	5.15 {0.53}	4.2	7.6	9.75
			40	11.4	0.7	30	5.88 {0.60}	4.9	7.6	9.75
			45	11.5	0.75	33.8	6.62 {0.68}	4.3	9.8	12
			50	11.5	0.75	37.5	7.35 {0.75}	4.8	9.8	12
			55	11.5	0.75	41.3	8.09 {0.83}	5.3	9.8	12
			60	11.6	0.8	45	8.82 {0.90}	4.3	13	15.25
			65	11.6	0.8	48.8	9.56 {0.98}	4.7	13	15.25
			70	11.6	0.8	50.4	9.88 {1.01}	5.1	13	15.25	72
			80	11.6	0.8	52	10.19 {1.04}	5.9	13	15.25	65
SL-VUY	12	—	25	13.5	0.75	16.3	3.19 {0.33}	3.6	7	8.25	65
SH-VUY			30	13.5	0.75	19.5	3.82 {0.39}	4.4	7	8.25
SHD-VUY			35	13.5	0.75	22.8	4.46 {0.46}	5.2	7	8.25
			40	13.6	0.8	30	5.88 {0.60}	4.7	8.8	10	75
			45	13.6	0.8	33.8	6.62 {0.68}	5.3	8.8	10
			50	13.6	0.8	37.5	7.35 {0.75}	6	8.8	10
			55	13.6	0.8	41.3	8.09 {0.83}	6.6	8.8	10
			60	13.8	0.9	45	8.82 {0.90}	4.7	13.8	14.25
			65	13.8	0.9	48.8	9.56 {0.98}	5.1	13.8	14.25
			70	13.8	0.9	52.5	10.29 {1.05}	5.5	13.8	14.25
			80	13.8	0.9	60	11.76 {1.20}	6.3	13.8	14.25
			90	14	1	67.5	13.23 {1.35}	4.8	21.3	20.25
SL-VUY	16	—	35	17.8	0.9	26.3	5.15 {0.53}	5.8	7.7	7.5	75
SH-VUY			40	17.8	0.9	30	5.88 {0.60}	6.7	7.7	7.5
SHD-VUY			45	17.8	0.9	33.8	6.62 {0.68}	7.6	7.7	7.5
			50	17.8	0.9	37.5	7.35 {0.75}	8.6	7.7	7.5
			55	18	1	41.3	8.09 {0.83}	6.1	11.5	10.5
			60	18	1	45	8.82 {0.90}	6.7	11.5	10.5
			65	18	1	48.8	9.56 {0.98}	7.2	11.5	10.5
			70	18	1	52.5	10.29 {1.05}	7.8	11.5	10.5
			80	18.2	1.1	60	11.76 {1.20}	6.2	16.8	14.25
			90	18.2	1.1	67.5	13.23 {1.35}	7	16.8	14.25
			100	18.2	1.1	75	14.70 {1.50}	7.8	16.8	14.25

[!] Both ends are not ground for all sizes. [!] Usage Count: 1 million times

■SL-VUR·SH-VUR·SHD-VUR: Fmax. (allowable deflection) = L × 60%, Spring Constant: 0.29 N/mm [0.03 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUR SH-VUR SHD-VUR	3	—	10*	3.64	0.32	6	1.76	{0.18}	1.3	3.1	8.5
			15*	3.7	0.35	9	2.65	{0.27}	1.5	4.2	11
			20*	3.8	0.4	12	3.53	{0.36}	1.2	7.4	17.5
			25*	3.8	0.4	15	4.41	{0.45}	1.5	7.4	17.5
			30*	3.9	0.45	18	5.29	{0.54}	1.2	11.5	24.5
SL-VUR SH-VUR SHD-VUR	4	—	10*	4.76	0.38	6	1.76	{0.18}	1.4	3.5	8
			15*	4.76	0.38	9	2.65	{0.27}	2.3	3.5	8
			20*	4.8	0.4	12	3.53	{0.36}	2.4	4.3	9.75
			25*	4.9	0.45	15	4.41	{0.45}	2	6.6	13.5
			30*	5	0.5	18	5.29	{0.54}	1.6	10.2	19.25
SL-VUR SH-VUR SHD-VUR	5	—	10*	5.8	0.4	6	1.76	{0.18}	2	2.9	6.25
			15	5.9	0.45	9	2.65	{0.27}	1.7	5	10
			20	5.9	0.45	12	3.53	{0.36}	2.2	5	10
			25	6	0.5	15	4.41	{0.45}	1.9	7.5	14
			30	6	0.5	18	5.29	{0.54}	2.3	7.5	14
			35	6.1	0.55	21	6.17	{0.63}	2.3	9.6	16.5
			40	6.1	0.55	24	7.06	{0.72}	2.6	9.6	16.5
			45	6.2	0.6	27	7.94	{0.81}	2.1	13.8	22
			50	6.2	0.6	30	8.82	{0.90}	2.4	13.8	22
SL-VUR SH-VUR SHD-VUR	6	—	10*	6.9	0.45	6	1.76	{0.18}	2.1	3.2	6
			15	7	0.5	9	2.65	{0.27}	1.9	5	9
			20	7.1	0.55	12	3.53	{0.36}	2	6.6	11
			25	7.1	0.55	15	4.41	{0.45}	2.5	6.6	11
			30	7.1	0.55	18	5.29	{0.54}	3	6.6	11
			35	7.2	0.6	21	6.17	{0.63}	2.7	9	14
			40	7.2	0.6	24	7.06	{0.72}	3	9	14
			45	7.3	0.65	27	7.94	{0.81}	2.4	13.3	19.5
			50	7.3	0.65	30	8.82	{0.90}	2.7	13.3	19.5
			55	7.4	0.7	33	9.7	{0.99}	2.3	18.2	25
			60	7.4	0.7	36	10.59	{1.08}	2.5	18.2	25
SL-VUR SH-VUR SHD-VUR	8	—	20	9.3	0.65	12	3.53	{0.36}	2.4	6.8	9.5
			25	9.3	0.65	15	4.41	{0.45}	2.9	6.8	9.5
			30	9.4	0.7	18	5.29	{0.54}	2.7	9.1	12
			35	9.4	0.7	21	6.17	{0.63}	3.2	9.1	12
			40	9.4	0.7	24	7.06	{0.72}	3.6	9.1	12
			45	9.6	0.8	27	7.94	{0.81}	2.4	16.8	20
			50	9.6	0.8	30	8.82	{0.90}	2.6	16.8	20
			55	9.6	0.8	33	9.7	{0.99}	2.9	16.8	20
			60	9.6	0.8	36	10.58	{1.08}	3.2	16.8	20
			65	9.8	0.9	39	11.47	{1.17}	2.2	28.8	31
			70	9.8	0.9	42	12.36	{1.26}	2.3	28.8	31
			80	9.8	0.9	48	14.12	{1.44}	2.7	28.8	31
SL-VUR SH-VUR SHD-VUR	10	—	20	11.4	0.7	12	3.53	{0.36}	3.3	5.6	7
			25	11.5	0.75	15	4.41	{0.45}	3.1	7.5	9
			30	11.6	0.8	18	5.29	{0.54}	2.7	10.4	12
			35	11.6	0.8	21	6.17	{0.63}	3.2	10.4	12
			40	11.6	0.8	24	7.06	{0.72}	3.6	10.4	12
			45	11.8	0.9	27	7.94	{0.81}	2.8	16.2	17
			50	11.8	0.9	30	8.82	{0.90}	3.1	16.2	17
			55	11.8	0.9	33	9.7	{0.99}	3.4	16.2	17
			60	11.8	0.9	36	10.58	{1.08}	3.8	16.2	17
			65	11.8	0.9	39	11.47	{1.17}	4.1	16.2	17
			70	12	1	42	12.6	{1.26}	2.9	26	25
			80	12	1	48	14.12	{1.44}	3.3	26	25
SL-VUR SH-VUR SHD-VUR	12	—	25	13.6	0.8	15	4.41	{0.45}	3.6	7.2	8
			30	13.6	0.8	18	5.29	{0.54}	4.3	7.2	8
			35	13.8	0.9	21	6.17	{0.63}	3.3	11.3	11.5
			40	13.8	0.9	24	7.06	{0.72}	3.8	11.3	11.5
			45	13.8	0.9	27	7.94	{0.81}	4.3	11.3	11.5
			50	14	1	30	8.82	{0.90}	3.3	17	16
			55	14	1	33	9.7	{0.99}	3.7	17	16
			60	14	1	36	10.58	{1.08}	4	17	16
			65	14	1	39	11.47	{1.17}	4.3	17	16
			70	14.2	1.1	42	12.35	{1.26}	3.3	25.3	22
			80	14.2	1.1	48	14.11	{1.44}	3.8	25.3	22
			90	14.2	1.1	54	15.88	{1.62}	4.3	25.3	22
SL-VUR SH-VUR SHD-VUR	16	—	35	18	1	21	6.17	{0.63}	4.7	9.5	8.5
			40	18	1	24	7.06	{0.72}	5.3	9.5	8.5
			45	18.2	1.1	27	7.94	{0.81}	4.5	13.2	11
			50	18.2	1.1	30	8.82	{0.90}	5	13.2	11
			55	18.2	1.1	33	9.7	{0.99}	5.5	13.2	11
			60	18.2	1.1	36	10.58	{1.08}	6	13.2	11
			65	18.4	1.2	39	11.47	{1.17}	5	18	14
			70	18.4	1.2	42	12.35	{1.26}	5.4	18	14
			80	18.4	1.2	48	14.11	{1.44}	6.2	18	14
			90	18.4	1.2	54	15.88	{1.62}	6.9	18	14
			100	18.4	1.2	60	17.64	{1.80}	7.7	18	14

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[!] Usage Count: 1 million times

■SL-VUF·SH-VUF·SHD-VUF: Fmax. (allowable deflection) = L × 45%, Spring Constant: 0.49 N/mm [0.05 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUF SH-VUF SHD-VUF	3	—	10*	3.7	0.35	4.5	2.21	{0.23}	1.6	3	7.5
			15*	3.8	0.4	6.75	3.31	{0.34}	1.5	4.7	10.75
			20*	3.9	0.45	9	4.41	{0.45}	1.3	7.5	15.5
			25*	3.9	0.45	11.25	5.51	{0.56}	1.7	7.5	15.5
			30*	4	0.5	13.5	6.62	{0.68}	1.4	11.4	21.75
SL-VUF SH-VUF SHD-VUF	4	—	10*	4.8	0.4	4.5	2.21	{0.23}	1.9	3	6.5
			15*	4.9	0.45	6.75	3.31	{0.34}	2	4.4	8.75
			20*	5	0.5	9	4.41	{0.45}	1.8	6.5	12
			25*	5	0.5	11.25	5.51	{0.56}	2.3	6.5	12
			30*	5.1	0.55	13.5	6.62	{0.68}	1.9	9.5	16.25
SL-VUF SH-VUF SHD-VUF	5	—	10*	6	0.5	4.5	2.21	{0.23}	1.4	4.4	7.75
			15	6	0.5	6.8	3.33	{0.34}	2.3	4.3	7.5
			20	6	0.5	9	4.41	{0.45}	3.1	4.3	7.5
			25	6.2	0.6	11.3	5.49	{0.56}	2.1	8.4	13
			30	6.2	0.6	13.5	6.57	{0.67}	2.5	8.4	13
			35	6.2	0.6	15.8	7.64	{0.78}	2.9	8.4	13
			40	6.4	0.7	18	8.82	{0.90}	1.9	16.1	22
			45	6.4	0.7	20.3	9.9	{1.01}	2.1	16.1	22
			50	6.4	0.7	22.5	10.98	{1.12}	2.4	16.1	22
SL-VUF SH-VUF SHD-VUF	6	—	10*	7.1	0.55	4.5	2.21	{0.23}	1.6	4.4	7
			15	7.2	0.6	6.8	3.33	{0.34}	1.9	6	9
			20	7.2	0.6	9	4.41	{0.45}	2.5	6	9
			25	7.2	0.6	11.3	5.49	{0.56}	3.1	6	9
			30	7.2	0.6	13.5	6.57	{0.67}	3.8	6	9
			35	7.4	0.7	15.8	7.64	{0.78}	2.7	10.5	14
			40	7.4	0.7	18	8.82	{0.90}	3.1	10.5	14
			45	7.4	0.7	20.3	9.9	{1.01}	3.5	10.5	14
			50	7.6	0.8	22.5	10.98	{1.12}	2.4	18.4	22
			55	7.6	0.8	24.8	12.05	{1.23}	2.6	18.4	22
			60	7.6	0.8	27	13.23	{1.35}	2.9	18.4	22
SL-VUF SH-VUF SHD-VUF	8	—	20	9.4	0.7	9	4.41	{0.45}	3.1	6	7.5
			25	9.4	0.7	11.3	5.49	{0.56}	3.8	6	7.5
			30	9.4	0.7	13.5	6.57	{0.67}	4.6	6	7.5
			35	9.6	0.8	15.8	7.64	{0.78}	3.3	10	11.5
			40	9.6	0.8	18	8.82	{0.90}	3.8	10	11.5
			45	9.6	0.8	20.3	9.9	{1.01}	4.3	10	11.5
			50	9.6	0.8	22.5	10.98	{1.12}	4.8	10	11.5
			55	10	1	24.8	12.05	{1.23}	2.5	24	23
			60	10	1	27	13.23	{1.35}	2.7	24	23
			65	10	1	29.3	14.31	{1.46}	3	24	23
			70	10	1	31.5	15.39	{1.57}	3.2	24	23
			80	10	1	36	17.64	{1.80}	3.6	24	23
SL-VUF SH-VUF SHD-VUF	10	—	20	11.6	0.8	9	4.41	{0.45}	3.3	6.4	7
			25	11.6	0.8	11.3	5.49	{0.56}	4.2	6.4	7
			30	11.6	0.8	13.5	6.57	{0.67}	5	6.4	7
			35	11.8	0.9	15.8	7.64	{0.78}	3.9	9.9	10
			40	11.8	0.9	18	8.82	{0.90}	4.4	9.9	10
			45	11.8	0.9	20.3	9.9	{1.01}	5	9.9	10
			50	11.8	0.9	22.5	10.98	{1.12}	5.6	9.9	10
			55	12.2	1.1	24.8	12.05	{1.23}	3.1	21.5	18.5
			60	12.2	1.1	27	13.23	{1.35}	3.4	21.5	18.5
			65	12.2	1.1	29.3	14.31	{1.46}	3.7	21.5	18.5
			70	12.2	1.1	31.5	15.39	{1.57}	4	21.5	18.5
			80	12.2	1.1	36	17.64	{1.80}	4.6	21.5	18.5
SL-VUF SH-VUF SHD-VUF	12	—	25	14	1	11.3	5.49	{0.56}	3.1	10	9
			30	14	1	13.5	6.57	{0.67}	3.8	10	9
			35	14	1	15.8	7.64	{0.78}	4.4	10	9
			40	14	1	18	8.82	{0.90}	5	10	9
			45	14	1	20.3	9.9	{1.01}	5.6	10	9
			50	14.2	1.1	22.5	10.98	{1.12}	4.3	14.9	12.5
			55	14.2	1.1	24.8	12.05	{1.23}	4.8	14.9	12.5
			60	14.2	1.1	27	13.23	{1.35}	5.2	14.9	12.5
			65	14.2	1.1	29.3	14.31	{1.46}	5.7	14.9	12.5
			70	14.4	1.2	31.5	15.39	{1.57}	4.4	21.6	17
			80	14.4	1.2	36	17.64	{1.80}	5	21.6	17
			90	14.4	1.2	40.5	19.8	{2.02}	5.6	21.6	17
SL-VUF SH-VUF SHD-VUF	16	—	35	18.4	1.2	15.8	7.64	{0.78}	4.7	11.4	8.5
			40	18.4	1.2	18	8.82	{0.90}	5.3	11.4	8.5
			45	18.4	1.2	20.3	9.9	{1.01}	6	11.4	8.5
			50	18.4	1.2	22.5	10.98	{1.12}	6.7	11.4	8.5
			55	18.6	1.3	24.8	12.05	{1.23}	5.2	16.3	11.5
			60	18.6	1.3	27	13.23	{1.35}	5.7	16.3	11.5
			65	18.6	1.3	29.3	14.31	{1.46}	6.2	16.3	11.5
			70	18.8	1.4	31.5	15.39	{1.57}	5.4	21	14
			80	18.8	1.4	36	17.64	{1.80}	6.2	21	14
			90	18.8	1.4	40.5	19.8	{2.02}	6.9	21	14
			100	18.8	1.4	45	22.05	{2.25}	7.7	21	14

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[!] Usage Count: 1 million times

■SL-VUL·SH-VUL·SHD-VUL: Fmax. (allowable deflection) = L × 40%, Spring Constant: 0.98 N/mm [0.10 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUL SH-VUL SHD-VUL	3	—	10*	3.9	0.45	4	3.92	{0.40}	1.2	4.5	9
			15*	4	0.5	6	5.88	{0.60}	1.3	6.7	12.3
			20*	4	0.5	8	7.84	{0.80}	1.8	6.7	12.3
			25	4.2	0.6	10	9.8	{1.00}	1.2	13.7	21.8
			30	4.2	0.6	12	11.76	{1.20}	1.4	13.7	21.8
SL-VUL SH-VUL SHD-VUL	4	—	10*	5	0.5	4	3.92	{0.40}	1.7	4	7
			15*	5.1	0.55	6	5.88	{0.60}	1.8	5.7	9.3
			20	5.2	0.6	8	7.84	{0.80}	1.8	7.8	12
			25	5.2	0.6	10	9.8	{1.00}	2.3	7.8	12
			30	5.3	0.65	12	11.76	{1.20}	2.1	10.6	15.3
SL-VUL SH-VUL SHD-VUL	5	—	10	6.2	0.6	4	3.92	{0.40}	1.7	4.8	7
			15	6.2	0.6	6	5.88	{0.60}	2.5	4.8	7
			20	6.2	0.6	8	7.84	{0.80}	3.3	4.8	7
			25	6.4	0.7	10	9.8	{1.00}	2.3	9.1	12
			30	6.4	0.7	12	11.76	{1.20}	2.7	9.1	12
			35	6.4	0.7	14	13.72	{1.40}	3.2	9.1	12
			40	6.6	0.8	16	15.68	{1.60}	2.2	16	19
			45	6.6	0.8	18	17.64	{1.80}	2.5	16	19
			50	6.6	0.8	20	19.6	{2.00}	2.8	16	19
SL-VUL SH-VUL SHD-VUL	6	—	10	7.3	0.65	4	3.92	{0.40}	1.8	5.1	6.8
			15	7.4	0.7	6	5.88	{0.60}	2.1	6.3	8
			20	7.4	0.7	8	7.84	{0.80}	2.9	6.3	8
			25	7.6	0.8	10	9.8	{1.00}	2.3	10.4	12
			30	7.6	0.8	12	11.76	{1.20}	2.7	10.4	12
			35	7.6	0.8	14	13.72	{1.40}	3.2	10.4	12
			40	7.8	0.9	16	15.68	{1.60}	2.5	16.2	17
			45	7.8	0.9	18	17.64	{1.80}	2.8	16.2	17
			50	7.8	0.9	20	19.6	{2.00}	3.1	16.2	17
			55	7.8	0.9	22	21.56	{2.20}	3.4	16.2	17
			60	7.8	0.9	24	23.52	{2.40}	3.8	16.2	17
SL-VUL SH-VUL SHD-VUL	8	—	20	9.8	0.9	8	7.84	{0.80}	2.4	9.5	9.5
			25	9.8	0.9	10	9.8	{1.00}	2.9	9.5	9.5
			30	10	1	12	11.76	{1.20}	2.5	14	13
			35	10	1	14	13.72	{1.40}	2.9	14	13
			40	10	1	16	15.68	{1.60}	3.3	14	13
			45	10	1	18	17.64	{1.80}	3.8	14	13
			50	10	1	20	19.6	{2.00}	4.2	14	13
			55	10	1	22	21.56	{2.20}	4.6	14	13
			60	10.4	1.2	24	23.52	{2.40}	2.7	28.8	23
			65	10.4	1.2	26	25.48	{2.60}	3	28.8	23
			70	10.4	1.2	28	27.44	{2.80}	3.2	28.8	23
			80	10.4	1.2	32	31.36	{3.20}	3.6	28.8	23
SL-VUL SH-VUL SHD-VUL	10	—	20	12	1	8	7.84	{0.80}	3.1	8.5	7.5
			25	12	1	10	9.8	{1.00}	3.8	8.5	7.5
			30	12.2	1.1	12	11.76	{1.20}	3.2	12.7	10.5
			35	12.2	1.1	14	13.72	{1.40}	3.7	12.7	10.5
			40	12.2	1.1	16	15.68	{1.60}	4.2	12.7	10.5
			45	12.2	1.1	18	17.64	{1.80}	4.7	12.7	10.5
			50	12.2	1.1	20	19.6	{2.00}	5.3	12.7	10.5
			55	12.6	1.3	22	21.56	{2.20}	3.1	25.4	18.5
			60	12.6	1.3	24	23.52	{2.40}	3.4	25.4	18.5
			65	12.6	1.3	26	25.48	{2.60}	3.7	25.4	18.5
			70	12.6	1.3	28	27.44	{2.80}	4	25.4	18.5
			80	12.6	1.3	32	31.36	{3.20}	4.6	25.4	18.5
SL-VUL SH-VUL SHD-VUL	12	—	25	14.4	1.2	10	9.8	{1.00}	2.9	12.6	9.5
			30	14.4	1.2	12	11.76	{1.20}	3.5	12.6	9.5
			35	14.4	1.2	14	13.72	{1.40}	4.1	12.6	9.5
			40	14.4	1.2	16	15.68	{1.60}	4.7	12.6	9.5
			45	14.4	1.2	18	17.64	{1.80}	5.3	12.6	9.5
			50	14.4	1.2	20	19.6	{2.00}	5.9	12.6	9.5
			55	14.8	1.4	22	21.56	{2.20}	4.1	21.7	14.5
			60	14.8	1.4	24	23.52	{2.40}	4.4	21.7	14.5
			65	14.8	1.4	26	25.48	{2.60}	4.8	21.7	14.5
			70	14.8	1.4	28	27.44	{2.80}	5.2	21.7	14.5
			80	14.8	1.4	32	31.36	{3.20}	5.9	21.7	14.5
			90	14.8	1.4	36	35.28	{3.60}	6.7	21.7	14.5
SL-VUL SH-VUL SHD-VUL	16	—	35	19	1.5	14	13.72	{1.40}	4.1	15.8	9.5
			40	19	1.5	16	15.68	{1.60}	4.7	15.8	9.5
			45	19	1.5	18	17.64	{1.80}	5.3	15.8	9.5
			50	19	1.5	20	19.6	{2.00}	5.9	15.8	9.5
			55	19.4	1.7	22	21.56	{2.20}	4.4	24.7	13.5
			60	19.4	1.7	24	23.52	{2.40}	4.8	24.7	13.5
			65	19.4	1.7	26	25.48	{2.60}	5.2	24.7	13.5
			70	19.4	1.7	28	27.44	{2.80}	5.6	24.7	13.5
			80	19.4	1.7	32	31.36	{3.20}	6.4	24.7	13.5
			90	19.4	1.7	36	35.28	{3.60}	7.2	24.7	13.5
			100	19.4	1.7	40	39.2	{4.00}	8	24.7	13.5

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[!] Usage Count: 1 million times

■SL-VUT·SH-VUT·SHD-VUT: Fmax. (allowable deflection) = L × 40%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUT SH-VUT SHD-VUT	3	—	10*	4	0.5	4	5.88	{0.60}	1.3	4.8	8.5
			15*	4.1	0.55	6	8.82	{0.90}	1.4	6.8	11.3
			20	4.2	0.6	8	11.76	{1.20}	1.4	9.5	14.8
			25	4.3	0.65	10	14.7	{1.50}	1.4	12.7	18.5
			30	4.4	0.7	12	17.64	{1.80}	1.3	17.2	23.5
SL-VUT SH-VUT SHD-VUT	4	—	10*	5.1	0.55	4	5.88	{0.60}	1.7	4.3	6.8
			15	5.2	0.6	6	8.82	{0.90}	2.1	5.7	8.5
			20	5.4	0.7	8	11.76	{1.20}	1.6	10	13.3
			25	5.4	0.7	10	14.7	{1.50}	2	10	13.3
			30	5.6	0.8	12	17.64	{1.80}	1.5	16.8	20
SL-VUT SH-VUT SHD-VUT	5	—	10	6.3	0.65	4	7.84	{0.80}	2.3	4.4	5.8
			15	6.5	0.75	6	11.76	{1.20}	2.1	7	8.3
			20	6.6	0.8	8	15.68	{1.60}	2.3	8.8	10
			25	6.6	0.8	10	19.6	{2.00}	2.9	8.8	10
			30	6.8	0.9	12	23.52	{2.40}	2.3	13.8	14.3
			35	6.8	0.9	14	27.44	{2.80}	2.7	13.8	14.3
			40	7	1	16	31.36	{3.20}	2.1	20.5	19.5
			45	7	1	18	35.28	{3.60}	2.4	20.5	19.5
			50	7.2	1.1	20	39.2	{4.00}	2	28.9	25.3
SL-VUT SH-VUT SHD-VUT	6	—	10	7.5	0.75	4	7.84	{0.80}	2.2	5.1	5.8
			15	7.6	0.8	6	11.76	{1.20}	2.6	6.4	7
			20	7.8	0.9	8	15.68	{1.60}	2.3	9.7	9.8
			25	7.8	0.9	10	19.6	{2.00}	2.9	9.7	9.8
			30	7.8	0.9	12	23.52	{2.40}	3.6	9.7	9.8
			35	8	1	14	27.44	{2.80}	2.8	14.5	13.5
			40	8	1	16	31.36	{3.20}	3.3	14.5	13.5
			45	8.2	1.1	18	35.28	{3.60}	2.6	20.9	18
			50	8.2	1.1	20	39.2	{4.00}	2.9	20.9	18
			55	8.4	1.2	22	43.12	{4.40}	2.4	29.4	23.5
			60	8.4	1.2	24	47.04	{4.80}	2.6	29.4	23.5
SL-VUT SH-VUT SHD-VUT	8	—	20	10	1	8	15.68	{1.60}	3.2	8.5	7.5
			25	10	1	10	19.6	{2.00}	4.1	8.5	7.5
			30	10.4	1.2	12	23.52	{2.40}	2.5	16.5	12.8
			35	10.4	1.2	14	27.44	{2.80}	3	16.5	12.8
			40	10.4	1.2	16	31.36	{3.20}	3.4	16.5	12.8
			45	10.4	1.2	18	35.28	{3.60}	3.9	16.5	12.8
			50	10.4	1.2	20	39.2	{4.00}	4.4	16.5	12.8
			55	10.8	1.4	22	43.12	{4.40}	2.7	30.5	20.8
			60	10.8	1.4	24	47.04	{4.80}	3	30.5	20.8
			65	10.8	1.4	26	50.96	{5.20}	3.3	30.5	20.8
			70	10.8	1.4	28	54.88	{5.60}	3.5	30.5	20.8
			80	10.8	1.4	32	62.72	{6.40}	4.1	30.5	20.8
SL-VUT SH-VUT SHD-VUT	10	—	20	12.2	1.1	8	15.68	{1.60}	4.1	8	6.3
			25	12.2	1.1	10	19.6	{2.00}	5.3	8	6.3
			30	12.4	1.2	12	23.52	{2.40}	4.6	10.8	8
			35	12.4	1.2	14	27.44	{2.80}	5.4	10.8	8
			40	12.6	1.3	16	31.36	{3.20}	4.6	14.3	10
			45	12.6	1.3	18	35.28	{3.60}	5.3	14.3	10
			50	12.8	1.4	20	39.2	{4.00}	4.4	18.9	12.5
			55	12.8	1.4	22	43.12	{4.40}	4.9	18.9	12.5
			60	12.8	1.4	24	47.04	{4.80}	5.4	18.9	12.5
			65	13	1.5	26	50.96	{5.20}	4.5	24.8	15.5
			70	13	1.5	28	54.88	{5.60}	4.9	24.8	15.5
			80	13	1.5	32	62.72	{6.40}	5.7	24.8	15.5
SL-VUT SH-VUT SHD-VUT	12	—	25	14.6	1.3	10	19.6	{2.00}	4.4	10.4	7
			30	14.6	1.3	12	23.52	{2.40}	5.4	10.4	7
			35	14.6	1.3	14	27.44	{2.80}	6.4	10.4	7
			40	14.8	1.4	16	31.36	{3.20}	5.7	13.3	8.5
			45	14.8	1.4	18	35.28	{3.60}	6.4	13.3	8.5
			50	15	1.5	20	39.2	{4.00}	5.6	16.9	10.3
			55	15	1.5	22	43.12	{4.40}	6.3	16.9	10.3
			60	15	1.5	24	47.04	{4.80}	6.9	16.9	10.3
			65	15.4	1.7	26	50.96	{5.20}	4.7	27.2	15
			70	15.4	1.7	28	54.88	{5.60}	5.1	27.2	15
			80	15.4	1.7	32	62.72	{6.40}	5.8	27.2	15
			90	15.4	1.7	36	70.56	{7.20}	6.6	27.2	15
SL-VUT SH-VUT SHD-VUT	16	—	35	19.2	1.6	14	27.44	{2.80}	6.3	12.8	7
			40	19.2	1.6	16	31.36	{3.20}	7.3	12.8	7
			45	19.2	1.6	18	35.28	{3.60}	8.3	12.8	7
			50	19.4	1.7	20	39.2	{4.00}	7.4	15.8	8.3
			55	19.4	1.7	22	43.12	{4.40}	8.2	15.8	8.3
			60	19.4	1.7	24	47.04	{4.80}	9	15.8	8.3
			65	19.6	1.8	26	50.96	{5.20}	7.9	19.4	9.8
			70	19.6	1.8	28	54.88	{5.60}	8.5	19.4	9.8
			80	20	2	32	62.72	{6.40}	6.7	28.5	13.3
			90	20	2	36	70.56	{7.20}	7.6	28.5	13.3
			100	20	2	40	78.4	{8.00}	8.5	28.5	13.3

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[!] Usage Count: 1 million times

■SL-VUM·SH-VUM·SHD-VUM: Fmax. (allowable deflection) = L × 35%, Spring Constant: 2.94 N/mm [0.30 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUM SH-VUM SHD-VUM	5	—	15	6.6	0.8	5.3	15.39	{1.57}	2.3	6.8	7.5
			20	6.8	0.9	7	20.58	{2.10}	1.8	11.7	12
			25	6.8	0.9	8.8	25.68	{2.62}	2.3	11.7	12
			30	7	1	10.5	30.87	{3.15}	2.4	14.5	13.5
			35	7	1	12.3	35.97	{3.67}	2.8	14.5	13.5
			40	7	1	14	41.16	{4.20}	3.2	14.5	13.5
			45	7.2	1.1	15.8	46.26	{4.72}	2.5	22	19
			50	7.2	1.1	17.5	51.45	{5.25}	2.8	22	19
SL-VUM SH-VUM SHD-VUM	6	—	15	7.8	0.9	5.3	15.39	{1.57}	2.3	7.7	7.5
			20	7.8	0.9	7	20.58	{2.10}	3	7.7	7.5
			25	8	1	8.8	25.68	{2.62}	2.8	11	10
			30	8	1	10.5	30.87	{3.15}	3.3	11	10
			35	8	1	12.3	35.97	{3.67}	3.9	11	10
			40	8.4	1.2	14	41.16	{4.20}	2.6	21	16.5
			45	8.4	1.2	15.8	46.26	{4.72}	2.9	21	16.5
			50	8.4	1.2	17.5	51.45	{5.25}	3.2	21	16.5
			55	8.6	1.3	19.3	56.55	{5.77}	2.6	29.9	22
			60	8.6	1.3	21	61.74	{6.30}	2.9	29.9	22
SL-VUM SH-VUM SHD-VUM	8	—	20	10.2	1.1	7	20.58	{2.10}	3.3	8.8	7
			25	10.2	1.1	8.8	25.68	{2.62}	4.2	8.8	7
			30	10.2	1.1	10.5	30.87	{3.15}	5	8.8	7
			35	10.6	1.3	12.3	35.97	{3.67}	3.5	15.6	11
			40	10.6	1.3	14	41.16	{4.20}	4	15.6	11
			45	10.6	1.3	15.8	46.26	{4.72}	4.5	15.6	11
			50	10.6	1.3	17.5	51.45	{5.25}	5	15.6	11
			55	11	1.5	19.3	56.55	{5.77}	3.3	27.8	17.5
			60	11	1.5	21	61.74	{6.30}	3.6	27.8	17.5
			65	11	1.5	22.8	66.84	{6.82}	3.9	27.8	17.5
			70	11	1.5	24.5	72.03	{7.35}	4.2	27.8	17.5
			80	11	1.5	28	82.32	{8.40}	4.8	27.8	17.5
SL-VUM SH-VUM SHD-VUM	10	—	20	12.4	1.2	7	20.58	{2.10}	4	8.4	6
			25	12.6	1.3	8.8	25.68	{2.62}	4.2	10.4	7
			30	12.6	1.3	10.5	30.87	{3.15}	5	10.4	7
			35	12.6	1.3	12.3	35.97	{3.67}	5.8	10.4	7
			40	13	1.5	14	41.16	{4.20}	3.8	18.8	11.5
			45	13	1.5	15.8	46.26	{4.72}	4.3	18.8	11.5
			50	13	1.5	17.5	51.45	{5.25}	4.8	18.8	11.5
			55	13	1.5	19.3	56.55	{5.77}	5.2	18.8	11.5
			60	13	1.5	21	61.74	{6.30}	5.7	18.8	11.5
			65	13.4	1.7	22.8	66.84	{6.82}	4.3	28.9	16
			70	13.4	1.7	24.5	72.03	{7.35}	4.7	28.9	16
			80	13.4	1.7	28	82.32	{8.40}	5.3	28.9	16
SL-VUM SH-VUM SHD-VUM	12	—	25	14.8	1.4	8.8	25.68	{2.62}	5	9.8	6
			30	14.8	1.4	10.5	30.87	{3.15}	6	9.8	6
			35	14.8	1.4	12.3	35.97	{3.67}	7	9.8	6
			40	15.2	1.6	14	41.16	{4.20}	5	16	9
			45	15.2	1.6	15.8	46.26	{4.72}	5.6	16	9
			50	15.2	1.6	17.5	51.45	{5.25}	6.3	16	9
			55	15.2	1.6	19.3	56.55	{5.77}	6.9	16	9
			60	15.6	1.8	21	61.74	{6.30}	5.5	23.4	12
			65	15.6	1.8	22.8	66.84	{6.82}	5.9	23.4	12
			70	15.6	1.8	24.5	72.03	{7.35}	6.4	23.4	12
			80	15.6	1.8	28	82.32	{8.40}	7.3	23.4	12
			90	15.6	1.8	31.5	92.61	{9.45}	8.2	23.4	12
SL-VUM SH-VUM SHD-VUM	16	—	35	19.6	1.8	12.3	35.97	{3.67}	5.8	14.4	7
			40	19.6	1.8	14	41.16	{4.20}	6.7	14.4	7
			45	19.6	1.8	15.8	46.26	{4.72}	7.5	14.4	7
			50	19.6	1.8	17.5	51.45	{5.25}	8.3	14.4	7
			55	19.6	1.8	19.3	56.55	{5.77}	9.2	14.4	7
			60	20.4	2.2	21	61.74	{6.30}	5.5	28.6	12
			65	20.4	2.2	22.8	66.84	{6.82}	5.9	28.6	12
			70	20.4	2.2	24.5	72.03	{7.35}	6.4	28.6	12
			80	20.4	2.2	28	82.32	{8.40}	7.3	28.6	12
			90	20.4	2.2	31.5	92.61	{9.45}	8.2	28.6	12
			100	20.4	2.2	35	102.9	{10.50}	9.1	28.6	12

[ ! ] Both ends are ground for all sizes.
[!] Usage Count: 1 million times

■SL-VUH·SH-VUH·SHD-VUH: Fmax. (allowable deflection) = L × Fa%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference			Fa %
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils	Fa %
SL-VUH SH-VUH SHD-VUH	3	—	10	4.2	0.6	3	8.82	{ 0.90}	1.3	5.7	8.5	30
			15	4.3	0.65	4.5	13.23	{ 1.35}	1.6	7.5	10.5
			20	4.5	0.75	6	17.64	{ 1.80}	1.3	12.8	16
			25	4.6	0.8	7.5	22.05	{ 2.25}	1.3	16.6	19.8
			30	4.6	0.8	8.4	24.7	{ 2.52}	1.6	16.6	19.8	28
SL-VUH SH-VUH SHD-VUH	4	—	10	5.4	0.7	3	8.82	{ 0.90}	1.4	6.2	7.8	30
			15	5.4	0.7	4.5	13.23	{ 1.35}	2.3	6.2	7.8
			20	5.6	0.8	6	17.64	{ 1.80}	1.9	9.8	11.3
			25	5.6	0.8	7.5	22.05	{ 2.25}	2.5	9.8	11.3
			30	5.8	0.9	9	26.46	{ 2.70}	2	15.1	15.8
SL-VUH SH-VUH SHD-VUH	5	—	10	6.7	0.85	3	17.64	{ 1.80}	2.5	5.4	5.3	30
			15	7	1	4.5	26.46	{ 2.70}	2.1	9	8	30
			20	7	1	5.6	32.93	{ 3.36}	3	9	8	28
			25	7.2	1.1	7.5	44.1	{ 4.50}	2.6	12.7	10.5	30
			30	7.2	1.1	7.8	45.86	{ 4.68}	3.2	12.7	10.5	26
			35	7.6	1.3	10.5	61.74	{ 6.30}	2.1	23.1	16.8	30
			40	7.6	1.3	10.8	63.5	{ 6.48}	2.5	23.1	16.8	27
			45	7.6	1.3	11.25	66.15	{ 6.75}	2.8	23.1	16.8	25
			50	7.8	1.4	12.5	73.5	{ 7.50}	2.4	30.8	21	25
SL-VUH SH-VUH SHD-VUH	6	—	10	7.8	0.9	3	17.64	{ 1.80}	3.2	5	4.5	30
			15	8.2	1.1	4.5	26.46	{ 2.70}	2.3	9.4	7.5
			20	8.2	1.1	6	35.28	{ 3.60}	3.2	9.4	7.5
			25	8.6	1.3	7.5	44.1	{ 4.50}	2.4	16	11.3
			30	8.6	1.3	9	52.92	{ 5.40}	2.9	16	11.3
			35	8.8	1.4	10.5	61.74	{ 6.30}	2.6	21.4	14.3
			40	8.8	1.4	12	70.56	{ 7.20}	3	21.4	14.3
			45	9	1.5	13.5	79.38	{ 8.10}	2.6	28.5	18
			50	9	1.5	14	82.32	{ 8.40}	2.9	28.5	18	28
			55	9	1.5	14.3	84.08	{ 8.58}	3.2	28.5	18	26
			60	9.2	1.6	15	88.2	{ 9.00}	2.8	36.8	22	25
SL-VUH SH-VUH SHD-VUH	8	—	20	10.6	1.3	6	35.28	{ 3.60}	3.6	10.1	6.8	30
			25	10.8	1.4	7.5	44.1	{ 4.50}	3.5	13	8.3
			30	10.8	1.4	9	52.92	{ 5.40}	4.3	13	8.3
			35	11.2	1.6	10.5	61.74	{ 6.30}	3.1	20.8	12
			40	11.2	1.6	12	70.56	{ 7.20}	3.6	20.8	12
			45	11.2	1.6	13.5	79.38	{ 8.10}	4.1	20.8	12
			50	11.6	1.8	15	88.2	{ 9.00}	3	32.9	17.3
			55	11.6	1.8	16.5	97.02	{ 9.90}	3.3	32.9	17.3
			60	11.6	1.8	18	105.84	{10.80}	3.6	32.9	17.3
			65	11.6	1.8	18.2	107.02	{10.92}	4	32.9	17.3	28
			70	11.6	1.8	18.9	111.13	{11.34}	4.3	32.9	17.3	27
			80	12	2	24	141.12	{14.40}	3.4	49.5	23.8	30
SL-VUH SH-VUH SHD-VUH	10	—	20	13.2	1.6	6	58.86	{ 6.00}	4.8	10.4	5.5	30
			25	13.6	1.8	7.5	73.58	{ 7.50}	4	14.9	7.3
			30	13.8	1.9	9	88.29	{ 9.00}	4.1	17.6	8.3
			35	13.8	1.9	10.5	103.01	{10.50}	4.9	17.6	8.3
			40	14.2	2.1	12	117.72	{12.00}	3.9	25.2	11
			45	14.2	2.1	13.5	132.44	{13.50}	4.5	25.2	11
			50	14.2	2.1	14	137.34	{14.00}	5	25.2	11	28
			55	14.2	2.1	14.3	140.28	{14.30}	5.6	25.2	11	26
			60	14.8	2.4	15.6	153.04	{15.60}	4	39.6	15.5
			65	14.8	2.4	16.9	165.79	{16.90}	4.4	39.6	15.5
			70	14.8	2.4	18.2	178.54	{18.20}	4.8	39.6	15.5
			80	15	2.5	20.8	204.05	{20.80}	4.6	47.5	18
SL-VUH SH-VUH SHD-VUH	12	—	25	15.8	1.9	7.5	73.58	{ 7.50}	5.3	13.3	6	30
			30	15.8	1.9	9	88.29	{ 9.00}	6.5	13.3	6
			35	16.2	2.1	10.5	103.01	{10.50}	5.3	18.4	7.8
			40	16.2	2.1	12	117.72	{12.00}	6.2	18.4	7.8
			45	16.6	2.3	13.5	132.44	{13.50}	5	25.3	10
			50	16.6	2.3	15	147.15	{15.00}	5.6	25.3	10
			55	16.6	2.3	16.5	161.87	{16.50}	6.3	25.3	10
			60	17.2	2.6	18	176.58	{18.00}	4.5	39	14
			65	17.2	2.6	19.5	191.3	{19.50}	4.9	39	14
			70	17.2	2.6	20.3	199.14	{20.30}	5.4	39	14	29
			80	17.6	2.8	21.6	211.9	{21.60}	4.7	52.5	17.8	27
			90	17.6	2.8	22.5	220.73	{22.50}	5.3	52.5	17.8	25
SL-VUH SH-VUH SHD-VUH	16	—	35	21	2.5	10.5	103.01	{10.50}	5.7	20.7	7.3	30
			40	21	2.5	12	117.72	{12.00}	6.6	20.7	7.3
			45	21	2.5	13.5	132.44	{13.50}	7.6	20.7	7.3
			50	21	2.5	15	147.15	{15.00}	8.5	20.7	7.3
			55	21.6	2.8	16.5	161.87	{16.50}	6.3	30.1	9.8
			60	21.6	2.8	18	176.58	{18.00}	7	30.1	9.8
			65	21.6	2.8	19.5	191.3	{19.50}	7.6	30.1	9.8
			70	22	3	21	206.01	{21.00}	6.4	39	12
			80	22	3	24	235.44	{24.00}	7.4	39	12
			90	22.4	3.2	27	264.87	{27.00}	6.6	49.6	14.5
			100	22.4	3.2	30	294.3	{30.00}	7.4	49.6	14.5

[ ! ] Both ends are ground for all sizes.
[!] Usage Count: 1 million times

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.
[!] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).

■Spring Constant (N/mm) [kgf/mm]

Type

SL-VUY

SL-VUR

SL-VUF

SL-VUL

SL-VUT

SL-VUM

SL-VUH

SH-VUY

SH-VUR

SH-VUF

SH-VUL

SH-VUT

SH-VUM

SH-VUH

SHD-VUY

SHD-VUR

SHD-VUF

SHD-VUL

SHD-VUT

SHD-VUM

SHD-VUH

0.098
{0.01}

0.29
{0.03}

0.49
{0.05}

0.98
{0.10}

1.47
{0.15}

2.94
{0.30}

1.96
{0.20}

2.94
{0.30}

5.88
{0.60}

0.196
{0.02}

9.81
{1.00}

Fmax.

F = L × Fa%

F=L × 60%

F=L × 45%

F=L × 40%

F=L × 35%

F = L × Fa%

Cautions/Prohibitions

Operating Temperature

Stainless Steel: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
* If you plan to use it in the environment with temperature difference or humidity such as outdoors, stainless steel is recommended.
* Heat resistant springs are also available. For the details, see the catalog of "Standard Components for Plastic Mold".

Standard Usage Count

Approx. 1 million times
* The above number is just a standard. The usage count varies depending on the direction of tension, operating temperature, environment, and deflection.
It is recommended to use the springs within the range of the allowable deflection F max.(mm).

Others

·Round Wire Coil Springs are manufactured based on the following diametric tolerance priorities given. I.D. Selectable Type: I.D. tolerance prioritized / O.D. Selectable Type: O.D. tolerance prioritized.
·Stainless steel springs are also magnetic. Please be careful.

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaningRo water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer　according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SHD-VUM12-70

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Free Length L (mm)	Outer Dia. D (or D1) (Ø)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Cleaning Method	Allowable Displacement (mm)
	156,913 IDR	1 Piece(s)	Available	18 Day(s) or more	70	15.6	2.94	50.01~73.00	72.03	1.8	23.4	Electrolytic Polishing + Precision Cleaning	24.5

Basic Information

Type	Round Wire	Characteristics/Applications	RoHS Compliant (10 Substances)	Environmentally friendly	RoHS Compliant (10 Substances)

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-VUF
- SH-VUH
- SH-VUL
- SH-VUM
- SH-VUR
- SH-VUY
- SHD-VUF
- SHD-VUH
- SHD-VUL
- SHD-VUM
- SHD-VUR
- SHD-VUY
- SL-VUF
- SL-VUH
- SL-VUL
- SL-VUM
- SL-VUR
- SL-VUY
Clear
Free Length L(mm)
15

20

25

30

35

40

45

50

55

60

65

70

80

90

100
Clear
Outer Dia. D (or D1)(Ø)
5.9

6

6.1

6.2

6.4

6.6

6.8

7

7.1

7.2

7.3

7.4

7.6

7.8

8

8.4

8.6

9.3

9.4

9.6

9.8

10

10.2

10.4

10.6

10.8

11

11.4

11.5

11.6

11.8

12

12.2

12.4

12.6

13

13.4

13.6

13.8

14

14.2

14.4

14.8

15.2

15.6

18

18.2

18.4

18.6

18.8

19

19.4

19.6

20.4
Clear
Spring Constant(N/mm)
0.098

0.29

0.49

0.98

2.94

5.88
Clear
Allowable Load (Configurable Range)(N)
- ~1.50
- 1.51~4.50
- 4.51~8.50
- 8.51~16.00
- 16.01~30.00
- 30.01~50.00
- 50.01~73.00
- 73.01~107.00
Clear
Max. Load(N)
0.96

2.65

3.33

3.53

4.41

5.29

5.49

5.88

6.17

6.57

7.06

7.64

7.84

7.94

8.82

9.7

9.8

9.9

10.58

10.59

10.98

11.47

11.76

12.05

12.35

12.36

12.6

13.23

13.72

14.11

14.12

14.31

15.39

15.68

15.88

17.64

19.6

19.8

20.58

21.56

22.05

23.52

25.48

25.68

27.44

30.87

31.36

35.28

35.97

39.2

41.16

44.1

46.26

51.45

56.55

61.74

66.84

72.03

82.32

92.61

102.90
Clear
Wire Dia.(Ø)
0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

2.2
Clear
Solid Length(mm)
4.2

4.3

4.8

5

5.6$8.6

6

6.3

6.4

6.8

6.8$7.5

7.2

7.2$6.6

7.5

7.7

8.3$7.5

8.4

8.5

8.8

9.0$10.2

9.1

9.1$9.8

9.5

9.6$11.0

9.8

9.9

10

10.4

10.5

11

11.3

11.4

11.7

12.6

12.7

13

13.2

13.3$14.3

13.8$15.6

14

14.4

14.5

14.9

15.6

15.8

16

16.1

16.2

16.3

16.8

17

18

18.2

18.4

18.8

21

21.5

21.6

21.7

22

23.4

24

24.7

25.3

25.4

26

27.8

28.6

28.8

28.9

29.9
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Allowable Displacement(mm)
5.25

6

6.75

7

7.5

8

8.75

9

9.75

10

10.5

11.25

12

12.25

13.5

14

15

15.75

16

17.5

18

19.25

20

20.25

21

22

22.5

22.75

24

24.5

24.75

26

27

28

29.25

30

31.5

32

33

35

36

39

40

40.5

42

45

48

54

60
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

18 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced (SHD-VUM12-70)

(i)Caution

Specification Table

Cautions/Prohibitions

Part Number

Basic Information

Configure

Specification/Dimensions

type

Free Length L(mm)

Outer Dia. D (or D1)(Ø)

Spring Constant(N/mm)

Allowable Load (Configurable Range)(N)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Allowable Displacement(mm)

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced (SHD-VUM12-70)

(i)Caution

Specification Table

Cautions/Prohibitions

Part Number

Basic Information

Configure

Specification/Dimensions

type

Free Length L(mm)

Outer Dia. D (or D1)(Ø)

Spring Constant(N/mm)

Allowable Load (Configurable Range)(N)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Allowable Displacement(mm)

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB