(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

[Clean & Pack] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UM/UH (SH-UM16-40-LKC)

[Clean & Pack] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UM/UH SH-UM16-40-LKC

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)    : Part Number SL-□□
·Precision cleaning (Degassing double packing)    : Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Process
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-UM16-40-LKC

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)    : Part Number SL-□□
·Precision cleaning (Degassing double packing)    : Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Process
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
TypeBody MaterialCleaning Method
Max. Deflection (Fmax.)
F = L × 35%F = L × 30%[ M ]MaterialCleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SL-UMSL-UHSUS304−WPB
(Spring constant ±10%)
DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-UMSH-UHPrecision cleaningClass 1,000Degassing double packingClass 10
SHD-UMSHD-UHElectrolytic polishing + precision cleaning
[ ! ]Maximum deflection differs from above for some sizes. See the specification table for details.
[ ! ]Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number
SL-UM16−80
SH-UH16−80
SHD-UH20−80
■UM: Fmax. (allowable deflection) = L × Fa%
Part NumberDSolid Length
(Reference Value)
F
max.
N{kgf}
max.
Fa%
TypeD−L
SL-UM

SH-UM

SHD-UM
4-5*0.42.21.753.4{0.35}35
10*0.54.93.56.8{0.7 }
150.557.55.2510.3{1.05}
200.611.1713.7{1.4 }
250.611.18.7517.2{1.75}
300.6516.310.520.6{2.1 }
5-5*0.452.251.753.4{0.35}35
10*0.53.133.56.8{0.7 }
150.658.455.2510.3{1.05}
200.658.45713.7{1.4 }
250.711.98.7517.2{1.75}
300.711.910.520.6{2.1 }
350.7516.512.2524{2.45}
400.823.21427.5{2.8 }
450.823.215.7530.9{3.15}
500.8531.4517.534.3{3.5 }
6-5*0.552.71.74.9{0.5 }35
100.75.63.510.8{1.1 }
150.757.45.215.7{1.6 }
200.757.4720.6{2.1 }
250.8512.88.725.5{2.6 }
300.8512.810.531.4{3.2 }
350.916.712.236.3{3.7 }
400.916.81441.2{4.2 }
45127.815.846.1{4.7 }
5012817.552{5.3 }
601281853{5.4 }30
701.146.22058.8{6 }28
8-100.856.43.510.8{1.1 }35
150.97.95.215.7{1.6 }
200.97.9720.6{2.1 }
250.97.98.725.5{2.6 }
3011210.531.4{3.2 }
3511212.236.3{3.7 }
401.118.71441.2{4.2 }
451.118.715.846.1{4.7 }
501.118.717.552{5.3 }
601.228.22161.8{6.3 }
701.34224.572.6{7.4 }
10-100.95.23.510.8{1.1}35
1517.35.215.7{1.6}
2017.3720.6{2.1}
251.110.58.725.5{2.6}
301.110.510.531.4{3.2}
351.21512.236.3{3.7}
401.2151441.2{4.2}
451.321.815.846.1{4.7}
501.321.817.552{5.3}
601.430.82161.8{6.3}
701.430.824.572.6{7.4}
12-151.17.25.2515.7{1.6}35
201.17.2720.6{2.1}
251.313.78.7525.5{2.6}
301.313.710.531.4{3.2}
401.313.71441.2{4.2}
501.525.517.552{5.3}
601.525.52161.8{6.3}
701.634.424.572.6{7.4}
801.634.42882.4{8.4}
13-151.28.45.215.7{1.6}35
201.311.1720.6{2.1}
251.311.18.725.5{2.6}
301.415.110.531.4{3.2}
351.415.112.236.3{3.7}
401.415.11441.2{4.2}
451.415.115.846.1{4.7}
501.415.117.552{5.3}
601.627.22161.8{6.3}
701.627.224.572.6{7.4}
801.736.22882.4{8.4}
16-151.49.65.215.7{ 1.6}35
201.512.4720.6{ 2.1}
251.512.48.725.5{ 2.6}
301.512.410.531.4{ 3.2}
351.615.612.236.3{ 3.7}
401.615.61441.2{ 4.2}
451.720.415.846.1{ 4.7}
501.720.417.552{ 5.3}
601.826.12161.8{ 6.3}
701.826.124.572.6{ 7.4}
801.826.12882.4{ 8.4}
20-201.811.3734.3{ 3.5}35
251.913.38.843.1{ 4.4}
301.913.310.552{ 5.3}
3521612.359.8{ 6.1}
402161468.6{ 7 }
452.223.715.877.5{ 7.9}
502.223.717.586.3{ 8.8}
602.223.721103{10.5}
702.434.824.5120.6{12.3}
802.434.828137.3{14 }
[ ! ]Both ends of * marked springs are not ground.
[ ! ]Usage Count: 1 million times
■UH: Fmax. (allowable deflection) = L × Fa%
Part NumberDSolid Length
(Reference Value)
F
max.
N{kgf}
max.
Fa%
TypeD−L
SL-UH

SH-UH

SHD-UH
4-5*0.452.71.54.4{ 0.45}30
10*0.53.838.8{ 0.9 }
150.68.14.513.2{ 1.35}
200.6511.7617.6{ 1.8 }
250.716.87.522.1{ 2.25}
300.716.8926.5{ 2.7 }
5-5*0.553.31.54.4{ 0.45}30
100.64.6538.8{ 0.9 }
150.64.654.513.2{ 1.35}
200.7511.81617.6{ 1.8 }
250.7511.817.522.1{ 2.25}
300.816926.5{ 2.7 }
350.8521.6810.530.9{ 3.15}
400.8521.681235.3{ 3.6 }
450.928.813.539.7{ 4.05}
6-5*0.653.21.58.8{ 0.9 }30
100.73.9317.7{ 1.8 }
150.857.74.526.5{ 2.7 }
200.99.7635.3{ 3.6 }
25115.57.544.1{ 4.5 }
30115.5953{ 5.4 }
351.124.89.857.9{ 5.9 }28
401.124.81058.8{ 6 }25
451.124.811.366.7{ 6.8 }
501.2391058.8{ 6 }20
601.2391482.4{ 8.4 }23
701.2391588.3{ 9 }21
8-100.95.3317.7{ 1.8 }30
150.95.34.526.5{ 2.7 }
201.111635.3{ 3.6 }
251.1117.544.1{ 4.5 }
301.215.9953{ 5.4 }
351.215.910.561.8{ 6.3 }
401.323.11270.6{ 7.2 }
451.323.113.579.4{ 8.1 }
501.433.31588.3{ 9 }
601.433.318105.9{10.8 }
701.54819111.8{11.4 }27
10-101.16.9317.7{ 1.8}30
151.16.94.526.5{ 2.7}
201.29.3635.3{ 3.6}
251.29.37.544.1{ 4.5}
301.312.7953{ 5.4}
351.417.510.561.8{ 6.3}
401.417.51270.6{ 7.2}
451.523.813.579.4{ 8.1}
501.523.81588.3{ 9 }
601.632.418105.9{10.8}
701.744.221123.6{12.6}
12-151.38.54.526.5{ 2.7}30
201.38.5635.3{ 3.6}
251.514.77.544.1{ 4.5}
301.514.7953{ 5.4}
401.725.51270.6{ 7.2}
501.725.51588.3{ 9 }
601.833.318105.9{10.8}
701.943.321123.6{12.6}
8025424141.2{14.4}
13-151.59.24.544.1{ 4.5}30
201.59.2658.8{ 6 }
251.59.27.573.5{ 7.5}
301.818988.3{ 9 }
351.81810.5103{10.5}
401.81812117.7{12 }
451.81813.5132.4{13.5}
50228.515147{15 }
602.13618176.5{18 }
702.245.121205.9{21 }
802.245.120196.1{20 }25
16-151.79.64.644.1{ 4.5}30
201.914658.8{ 6 }
251.9147.573.5{ 7.5}
301.914988.3{ 9 }
351.91410.5103{10.5}
402.225.112117.7{12 }
452.225.113.5132.4{13.5}
502.225.115147.1{15 }
602.330.518176.5{18 }
702.544.721205.9{21 }
802.544.724235.4{24 }
20-252.313.87.5110.8{11.3}30
302.313.89132.4{13.5}
352.518.810.5154.9{15.8}
402.518.812176.5{18 }
452.829.413.5199.1{20.3}
502.829.415220.6{22.5}
60340.518264.8{27 }
70340.521308.9{31.5}
803.254.424353{ 36 }
[ ! ]Both ends of * marked springs are not ground.
[ ! ]Usage Count: 1 million times

kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf]=N × 0.101972

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

[ ! ]The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
■Spring Constant (N/mm) [kgf/mm]
[ ! ]D12 is applicable to UY, UR, and UF Types only.
 TypeSL-UY
SH-UY
SHD-UY
SL-UR
SH-UR
SHD-UR
SL-UF
SH-UF
SHD-UF
SL-UM
SH-UM
SHD-UM
SL-UH
SH-UH
SHD-UH
D 
2 0.05 {0.005}  0.2 {0.02}  0.3 {0.03}       
3 0.098
{0.01}
  0.29
{0.03}
  0.49
{0.05}
       
4       2.0
{0.2}
  2.9 {0.3} 
5          
6       2.9
{0.3}
  5.9
{0.6}
 
8          
10 0.2
{0.02}
         
12          
13         9.8
{1.0}
 
16          
20 0.3 {0.03}  0.5 {0.05}  0.98 {0.1}  4.9 {0.5}  14.7 {1.5} 
Fmax.F = L × Fa%F = L × Fa%F = L × 45%F = L × Fa%F = L × Fa%

Alterations

 
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment

Alkaline warm pure water 
Ultrasonic pure water
cleaning after cleaning
with pure water
 
*3 times
 Dry Anti-rust single packing
·Precision cleaning (Part Number: SH-□□)
    

Working Environment: Class 1,000

 

Working Environment: Class 10

Hydrocarbon cleaning
Ro water cleaning
 Wash with pure
water (10 MΩ·cm) after
high-pressure water
jet cleaning (Ro water)
 Use pure water
(13 MΩ·cm)
 Use nitrogen blow 
Conducted on a clean
bench in a Class 10
clean environment
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
      

Working Environment: Class 1,000

 

Working Environment: Class 10

Hydrocarbon cleaning
Ro water cleaning
 Electrolytic polishing
with an electrolytic
polishing layer according
to the material
 Wash with pure
water (10 MΩ·cm) after
high-pressure water
jet cleaning (Ro water)
 Use warm pure water
(13 MΩ·cm)
 Use nitrogen blow 
Conducted on a clean
bench in a Class 10
clean environment
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ]Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
Part Number
SH-UM16-40-LKC
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipFree Length L
(mm)
Outer Dia. D (or D1)
(Ø)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Wire Dia.
(Ø)
Solid Length
(mm)
Cleaning Method Allowable Displacement
(mm)

129,904 IDR

1 Piece(s)Available 16 Day(s) or more 40162.930.01~50.0041.21.615.6Precision Cleaning14

Loading...

  1. 1

Tech Support