(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

MISUMI

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

O.D. D

ø10 or Less 0 0.5 mm
ø12 or More 0 -0.8 mm

Free Length L

50 or Less ±1.5 mm
55 or More ±2.5 mm

Closed Ends (Both Ends Not Ground*)

Closed Ends (Both Ends Ground)

Type				Body Material	Cleaning Method
Max. Deflection (Fmax.)				Body Material	Cleaning Method
F = L × 70%	F = L × 75%	F = L × 60%	F = L × 45%	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-UV	SL-UY	SL-UR	SL-UF	SUS304−WPB (Spring constant ±10%)	Degreasing	General environment	Anti-rust packing	General environment
SH-UV	SH-UY	SH-UR	SH-UF		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-UV	SHD-UY	SHD-UR	SHD-UF		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Maximum deflection differs from above for some sizes. See the specification table for details.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-UY4-25

SH-UR13-60

SHD-UF8-70

■UV: Fmax. (allowable deflection) = L × Fa%

Part Number			d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UV SH-UV SHD-UV	3−	5	0.15	1.1	4	0.18 {0.018}	70
		10	0.18	2.5	7	0.35 {0.036}
		15	0.18	2.5	11	0.53 {0.054}
		20	0.20	3.3	14	0.70 {0.071}
		25	0.23	6.2	18	0.88 {0.089}
		30	0.23	6.2	21	1.05 {0.107}
	4−	5	0.18	1.2	4	0.18 {0.018}
		10	0.20	1.7	7	0.35 {0.036}
		15	0.23	3.0	11	0.53 {0.054}
		20	0.23	3.0	14	0.70 {0.071}
		25	0.26	4.9	18	0.88 {0.089}
		30	0.26	4.9	21	1.05 {0.107}
	5−	5	0.20	1.2	4	0.18 {0.018}
		10	0.23	1.8	7	0.35 {0.036}
		15	0.26	2.9	11	0.53 {0.054}
		20	0.29	4.5	14	0.70 {0.071}
		25	0.29	4.5	18	0.88 {0.089}
		30	0.29	4.5	21	1.05 {0.107}
	6−	10	0.26	2.0	7	0.35 {0.036}
		15	0.30	3.3	11	0.53 {0.054}
		20	0.30	3.3	14	0.70 {0.071}
		25	0.35	6.5	18	0.88 {0.089}
		30	0.35	6.5	21	1.05 {0.107}
		35	0.35	6.5	25	1.23 {0.125}
		40	0.35	6.5	28	1.40 {0.143}
	8−	10	0.30	1.9	7	0.35 {0.036}
		15	0.35	3.2	11	0.53 {0.054}
		20	0.35	3.2	14	0.70 {0.071}
		25	0.40	5.6	18	0.88 {0.089}
		30	0.40	5.6	21	1.05 {0.107}
		35	0.40	5.6	25	1.23 {0.125}
		40	0.45	9.3	28	1.40 {0.143}
		45	0.45	9.3	32	1.58 {0.161}
		50	0.45	9.3	35	1.75 {0.179}
	10−	10	0.35	2.2	7	0.35 {0.036}
		15	0.40	3.4	11	0.53 {0.054}
		20	0.40	3.4	14	0.70 {0.071}
		25	0.45	5.4	18	0.88 {0.090}
		30	0.45	5.4	21	1.05 {0.107}
		35	0.50	8.4	25	1.23 {0.125}
		40	0.50	8.4	28	1.40 {0.143}
		45	0.55	12.8	32	1.58 {0.161}
		50	0.55	12.8	35	1.75 {0.179}

[!] Both ends of UV, UY Type springs are not ground. [!] Usage Count: 1 million times

■UY: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	2-5	0.13	1.5	3	0.15 {0.015}	60
	10	0.13	1.5	6	0.29 {0.03}
	15	0.15	2.7	9	0.44 {0.045}
	20	0.15	2.7	12	0.59 {0.06}
	25	0.18	6.3	15	0.74 {0.075}
	30	0.18	6.3	18	0.88 {0.09}
	3-5	0.16	0.92	3.75	0.37 {0.0375}	75
	10	0.2	2	7.5	0.74 {0.075}
	15	0.23	3.45	11.25	1.10 {0.1125}
	20	0.23	3.45	15	1.47 {0.15}
	25	0.26	6.24	15	1.47 {0.15}	60
	30	0.26	6.24	18	1.77 {0.18}	60
	4-5	0.2	1.05	3.75	0.37 {0.0375}	75
	10	0.23	1.84	7.5	0.74 {0.075}
	15	0.26	2.86	11.25	1.10 {0.1125}
	20	0.29	4.64	15	1.47 {0.15}
	25	0.3	5.4	18.75	1.84 {0.1875}
	30	0.3	5.4	22.5	2.26 {0.23}
	5-5	0.23	1.15	3.75	0.37 {0.0375}	75
	10	0.26	1.82	7.5	0.74 {0.075}
	15	0.3	3.15	11.25	1.10 {0.1125}
	20	0.3	3.15	15	1.47 {0.15}
	25	0.32	4.16	18.75	1.84 {0.1875}
	30	0.32	4.16	22.5	2.26 {0.23}
	35	0.35	6	26.25	2.55 {0.26}
	40	0.35	6	30	2.94 {0.3}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	6-5	0.26	1.24	3.5	0.34 {0.035}	70
	10	0.3	2.1	7.5	0.74 {0.075}	75
	15	0.32	2.64	11.25	1.10 {0.1125}
	20	0.35	3.85	15	1.47 {0.15}
	25	0.38	5.32	18.75	1.84 {0.1875}
	30	0.4	6.8	22.5	2.21 {0.225}
	35	0.4	6.8	26.25	2.55 {0.26}
	40	0.4	6.8	30	2.94 {0.3}
	8-10	0.35	2.19	7.5	0.74 {0.075}	75
	15	0.4	3.4	11.25	1.10 {0.1125}
	20	0.4	3.4	15	1.47 {0.15}
	25	0.45	5.4	18.75	1.84 {0.1875}
	30	0.45	5.4	22.5	2.21 {0.225}
	35	0.5	8.3	26.25	2.55 {0.26}
	40	0.5	8.3	30	2.94 {0.3}
	45	0.5	8.3	33.75	3.33 {0.34}
	50	0.55	12.7	35	3.43 {0.35}	70
	10-10	0.5	3.25	6	1.18 {0.12}	60
	15	0.5	3.25	11.25	2.21 {0.225}	75
	20	0.55	4.4	15	2.94 {0.3}
	25	0.55	4.4	18.75	3.68 {0.375}
	30	0.6	6.15	22.5	4.41 {0.45}
	35	0.6	6.3	26.25	5.10 {0.52}
	40	0.6	6.3	30	5.88 {0.6}
	45	0.65	8.45	33.75	6.62 {0.675}
	50	0.65	8.45	37.5	7.35 {0.75}
	12-15	0.55	3.3	11.25	2.206 {0.225}	75
	20	0.55	3.3	15	2.942 {0.3}
	25	0.6	4.2	18.75	3.68 {0.375}
	30	0.65	5.53	22.5	4.41 {0.45}
	35	0.65	5.53	26.25	5.15 {0.525}
	40	0.7	7.35	30	5.88 {0.6}
	45	0.7	7.35	33.75	6.62 {0.675}
	50	0.7	7.35	37.5	7.35 {0.75}
	60	0.8	13.6	45	8.83 {0.9}
	70	0.8	13.6	52.5	10.30 {1.05}
	80	0.8	13.6	60	11.77 {1.2}
	13-15	0.6	3.75	10.5	2.06 {0.21}	70
	20	0.6	3.75	15	2.94 {0.3}	75
	25	0.65	4.9	18.75	3.68 {0.375}
	30	0.65	4.9	22.5	4.41 {0.45}
	35	0.7	6.3	26.25	5.15 {0.525}
	40	0.75	8.25	30	5.88 {0.6}
	45	0.75	8.25	33.75	6.62 {0.675}
	50	0.8	11.2	37.5	7.35 {0.75}
	60	0.8	11.2	45	8.83 {0.9}
	70	0.85	14.45	52.5	10.30 {1.05}
	80	0.85	14.45	60	11.77 {1.2}
	16-15	0.7	4.2	9	1.77 {0.18}	60
	20	0.7	4.2	15	2.94 {0.3}	75
	25	0.7	4.2	18.75	3.68 {0.375}
	30	0.75	5.44	22.5	4.41 {0.45}
	35	0.8	6.8	26.25	5.15 {0.525}
	40	0.8	6.8	30	5.88 {0.6}
	45	0.85	8.5	33.75	6.62 {0.675}
	50	0.9	10.8	37.5	7.35 {0.75}
	60	0.9	10.8	45	8.83 {0.9}
	70	1	17	52.5	10.30 {1.05}
	80	1	17	60	11.77 {1.2}
	20-20	0.9	5.4	12	3.53 {0.36}	60
	25	0.9	5.4	18.75	5.49 {0.56}	75
	30	0.9	5.4	22.5	6.62 {0.675}
	35	1	7.5	26.25	7.65 {0.78}
	40	1	7.5	30	8.83 {0.9}
45	1	7.5	33.75	9.90 {1.01}
50	1.1	11	37.5	11.03 {1.125}
60	1.1	11	45	13.24 {1.35}
70	1.2	15.6	52.5	15.45 {1.58}
80	1.2	15.6	60	17.65 {1.8}

[ ! ] Both ends of UY Type springs are not ground.
[!] Usage Count: 1 million times

■UR: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	2-5	0.18	2	2.5	0.49 {0.05}	50
	10	0.18	2	5	0.98 {0.1}
	15	0.23	6	7.5	1.5 {0.15}
	20	0.23	6	10	2.0 {0.2}
	25	0.26	11.2	12.5	2.5 {0.25}
	30	0.26	11.2	15	2.9 {0.3}
	3-5	0.23	1.6	3	0.9 {0.09}	60
	10	0.25	2.1	6	1.8 {0.18}
	15	0.3	4.5	9	2.6 {0.27}
	20	0.3	4.5	12	3.5 {0.36}
	25	0.32	6.4	15	4.4 {0.45}
	30	0.32	6.4	18	5.3 {0.54}
	35	0.35	9.8	21	6.2 {0.63}
	40	0.35	9.8	24	7.1 {0.72}
	4-5	0.26	1.4	3	0.9 {0.09}	60
	10	0.29	2	6	1.8 {0.18}
	15	0.32	3	9	2.6 {0.27}
	20	0.38	6.1	12	3.5 {0.36}
	25	0.38	6.1	15	4.4 {0.45}
	30	0.4	8	18	5.3 {0.54}
	35	0.4	8	21	6.2 {0.63}
	40	0.45	14.4	24	7.1 {0.72}
	45	0.45	14.4	27	7.9 {0.81}
	50	0.45	14.4	30	8.8 {0.9}
	60	0.5	23	36	10.6 {1.08}
	5-5	0.3	1.65	3	0.9 {0.09}	60
	10	0.35	2.71	6	1.8 {0.18}
	15	0.38	3.61	9	2.6 {0.27}
	20	0.38	3.61	12	3.5 {0.36}
	25	0.45	7.43	15	4.4 {0.45}
	30	0.45	7.43	18	5.3 {0.54}
	35	0.5	12.25	21	6.2 {0.63}
	40	0.5	12.25	24	7.1 {0.72}
	45	0.5	12.25	27	7.9 {0.81}
	50	0.55	19.53	30	8.8 {0.9}
	60	0.55	19.53	36	10.6 {1.08}
	6-5	0.32	1.5	3	0.9 {0.09}	60
	10	0.4	3	6	1.8 {0.18}
	15	0.4	3	9	2.6 {0.27}
	20	0.5	7	12	3.5 {0.36}
	25	0.5	7	15	4.4 {0.45}
	30	0.5	7	18	5.3 {0.54}
	35	0.55	11	21	6.2 {0.63}
	40	0.55	11	24	7.1 {0.72}
	45	0.6	17.4	27	7.9 {0.81}
	50	0.6	17.4	30	8.8 {0.9}
	60	0.65	23.4	36	10.6 {1.08}
	70	0.65	23.4	42	12.4 {1.26}
	8-10	0.45	2.6	6	1.8 {0.18}	60
	15	0.5	3.6	9	2.6 {0.27}
	20	0.5	3.6	12	3.5 {0.36}
	25	0.55	5.9	15	4.4 {0.45}
	30	0.65	10.4	18	5.3 {0.54}
	35	0.65	10.4	21	6.2 {0.63}
	40	0.7	15.4	24	7.1 {0.72}
	45	0.75	21	22	6.3 {0.66}	50
	50	0.75	21	27	7.8 {0.81}	55
	60	0.8	27.6	31	8.9 {0.93}	52
	70	0.8	27.6	40	11.6 {1.20}	57
	80	0.8	27.6	48	14.1 {1.44}	60

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	10-10	0.55	3.3	6	1.8 {0.18}	60
	15	0.6	4.2	9	2.6 {0.27}
	20	0.65	6.2	12	3.5 {0.36}
	25	0.65	6.2	15	4.4 {0.45}
	30	0.7	8.4	18	5.3 {0.54}
	35	0.7	8.4	21	6.2 {0.63}
	40	0.7	8.4	24	7.1 {0.72}
	45	0.8	15.2	27	7.9 {0.81}
	50	0.8	15.2	30	8.8 {0.9}
	60	0.85	20.4	36	10.6 {1.08}
	70	0.85	20.4	42	12.4 {1.26}
	80	0.85	20.4	48	14.1 {1.44}
	12-15	0.6	3.5	9	2.6 {0.27}	60
	20	0.7	5.6	12	3.5 {0.36}
	25	0.7	5.6	15	4.4 {0.45}
	30	0.8	9.6	18	5.3 {0.54}
	35	0.8	9.6	21	6.2 {0.63}
	40	0.8	9.6	24	7.1 {0.72}
	45	0.9	16.2	27	7.9 {0.81}
	50	0.9	16.2	30	8.8 {0.9}
	60	0.9	16.2	36	10.6 {1.08}
	70	1	26	42	12.4 {1.26}
	80	1	26	48	14.1 {1.44}
	13-15	0.7	4.7	9	2.6 {0.27}	60
	20	0.7	4.7	12	3.5 {0.36}
	25	0.8	8	15	4.4 {0.45}
	30	0.8	8	18	5.3 {0.54}
	35	0.8	8	21	6.2 {0.63}
	40	0.9	12.8	24	7.1 {0.72}
	45	0.9	12.8	27	7.9 {0.81}
	50	0.9	12.8	30	8.8 {0.9}
	60	1	21	36	10.6 {1.08}
	70	1	21	42	12.4 {1.26}
	80	1	21	48	14.1 {1.44}
	16-15	0.75	4.3	9	2.6 {0.27}	60
	20	0.8	5.4	12	3.5 {0.36}
	25	0.9	7.7	15	4.4 {0.45}
	30	0.9	7.7	18	5.3 {0.54}
	35	1	12	21	6.2 {0.63}
	40	1	12	24	7.1 {0.72}
	45	1	12	27	7.9 {0.81}
	50	1.1	19	30	8.8 {0.9}
	60	1.1	19	36	10.6 {1.08}
	70	1.2	26.4	42	12.4 {1.26}
	80	1.2	26.4	48	14.1 {1.44}
	20-20	1	6	12	5.9 {0.6}	60
	25	1.1	7.7	15	7.4 {0.75}
	30	1.1	7.7	18	8.8 {0.9}
	35	1.2	10.8	21	10.3 {1.05}
	40	1.2	10.8	24	11.8 {1.2}
	45	1.3	14.3	27	13.2 {1.35}
	50	1.3	14.3	30	14.7 {1.5}
	60	1.4	19.6	36	17.7 {1.8}
	70	1.4	19.6	42	20.6 {2.1}
	80	1.5	27	48	23.5 {2.4}

[ ! ] Both ends of UR Type springs are not ground.
[!] Usage Count: 1 million times

■UF: Fmax. (allowable deflection) = L × 45%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	2-5*	0.2	2.35	2.25	0.66 {0.068}
	10*	0.2	2.35	4.5	1.3 {0.14}
	15*	0.26	7.8	6.7	2.0 {0.20}
	20*	0.26	7.8	9	2.7 {0.27}
	25*	0.29	13.6	11.2	3.3 {0.34}
	30*	0.29	13.6	13.5	4.0 {0.41}
	3-5*	0.26	1.8	2.25	1.1 {0.11}
	10*	0.32	4.5	4.5	2.2 {0.22}
	15*	0.32	4.5	6.7	3.2 {0.33}
	20*	0.35	6.3	9	4.4 {0.45}
	25*	0.35	6.3	11.2	5.5 {0.56}
	30*	0.4	12.4	13.5	6.6 {0.67}
	35*	0.4	12.4	15.7	7.6 {0.78}
	40*	0.4	12.4	18	8.8 {0.9}
	4-5*	0.32	2	2.25	1.1 {0.11}
	10*	0.35	3	4.5	2.2 {0.22}
	15*	0.4	5.2	6.7	3.2 {0.33}
	20*	0.4	5.2	9	4.4 {0.45}
	25*	0.45	9.5	11.2	5.5 {0.56}
	30*	0.45	9.5	13.5	6.6 {0.67}
	35*	0.5	15.5	15.7	7.6 {0.78}
	40*	0.5	15.5	18	8.8 {0.9}
	45*	0.5	15.5	20	9.8 {1}
	50*	0.5	15.5	22.5	10.8 {1.1}
	60*	0.55	22.6	27	12.7 {1.3}
	5-5*	0.35	2.01	2.25	1.1 {0.11}
	10*	0.4	3.2	4.5	2.2 {0.23}
	15*	0.4	3.2	6.75	3.3 {0.34}
	20*	0.45	4.95	9	4.4 {0.45}
	25*	0.45	4.95	11.25	5.5 {0.56}
	30*	0.5	7.75	13.5	6.7 {0.68}
	35*	0.5	7.75	15.75	7.7 {0.79}
	40	0.6	19.5	18	8.8 {0.9}
	45	0.6	19.5	20.25	10 {1.01}
	50	0.6	19.5	22.5	11.2 {1.13}
	60	0.65	27.95	27	13.4 {1.35}
	6-5*	0.4	2.2	2.25	1.1 {0.11}
	10*	0.5	5	4.5	2.2 {0.22}
	15*	0.55	7.7	6.7	3.2 {0.33}
	20*	0.55	7.7	9	4.4 {0.45}
	25	0.6	10.8	11.2	5.5 {0.56}
	30	0.65	15.6	13.5	6.6 {0.67}
	35	0.65	15.6	15.7	7.6 {0.78}
	40	0.65	15.6	18	8.8 {0.9}
	45	0.65	15.6	20	9.8 {1}
	50	0.7	23.1	22.5	10.8 {1.1}
	60	0.7	23.1	27	12.7 {1.3}
	70	0.75	30.8	31.5	14.7 {1.5}
	8-10	0.6	5.4	4.5	2.2 {0.22}
	15	0.65	7.2	6.7	3.2 {0.33}
	20	0.7	10.5	9	4.4 {0.45}
	25	0.7	10.5	11.2	5.5 {0.56}
	30	0.75	13.5	13.5	6.6 {0.67}
	35	0.75	13.5	15.7	7.6 {0.78}
	40	0.8	18.4	18	8.8 {0.9}
	45	0.8	18.4	20	9.8 {1}
	50	0.8	18.4	22.5	10.8 {1.1}
	60	0.85	26.4	27	12.7 {1.3}
	70	0.85	26.4	31.5	14.7 {1.5}
	80	0.85	26.4	36	17.7 {1.8}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	10-10	0.65	4.6	4.5	2.2 {0.22}
	15	0.65	4.6	6.7	3.2 {0.33}
	20	0.8	9.6	9	4.4 {0.45}
	25	0.8	9.6	11.2	5.5 {0.56}
	30	0.85	12.8	13.5	6.6 {0.67}
	35	0.85	12.8	15.7	7.6 {0.78}
	40	0.9	17	18	8.8 {0.9}
	45	0.9	17	20	9.8 {1}
	50	0.9	17	22.5	10.8 {1.1}
	60	1	28	27	12.7 {1.3}
	70	1	28	31.5	14.7 {1.5}
	80	1	28	36	17.7 {1.8}
	12-15	0.8	6.8	6.7	3.2 {0.33}
	20	0.8	6.8	9	4.4 {0.45}
	25	0.8	6.8	11.2	5.5 {0.56}
	30	0.9	10.8	13.5	6.6 {0.67}
	35	1	17	15.7	7.6 {0.78}
	40	1	17	18	8.8 {0.9}
	45	1	17	20	9.8 {1}
	50	1.1	26.4	22.5	10.8 {1.1}
	60	1.1	26.4	27	12.7 {1.3}
	70	1.1	26.4	31.5	14.7 {1.5}
	80	1.2	39.6	36	17.7 {1.8}
	13-15	0.8	5.6	6.7	3.2 {0.33}
	20	0.8	5.6	9	4.4 {0.45}
	25	0.85	7.2	11.2	5.5 {0.56}
	30	1	14	13.5	6.6 {0.67}
	35	1	14	15.7	7.6 {0.78}
	40	1	14	18	8.8 {0.9}
	45	1.1	21.5	20	9.8 {1}
	50	1.1	21.5	22.5	10.8 {1.1}
	60	1.1	21.5	27	12.7 {1.3}
	70	1.2	30	31.5	14.7 {1.5}
	80	1.2	30	36	17.7 {1.8}
	16-15	0.9	5.6	6.7	3.2 {0.33}
	20	1	7.7	9	4.4 {0.45}
	25	1	7.7	11.2	5.5 {0.56}
	30	1.1	12.1	13.5	6.6 {0.67}
	35	1.1	12.1	15.7	7.6 {0.78}
	40	1.2	18	18	8.8 {0.9}
	45	1.2	18	20	9.8 {1}
	50	1.2	18	22.5	10.8 {1.1}
	60	1.3	26	27	12.7 {1.3}
	70	1.3	26	31.5	14.7 {1.5}
	80	1.4	35	36	17.7 {1.8}
	20-20	1.2	7.2	9	8.8 {0.9}
	25	1.3	9.1	11.3	11.1 {1.13}
	30	1.4	11.9	13.5	13.2 {1.35}
	35	1.4	11.9	15.8	15.5 {1.58}
	40	1.5	15.8	18	17.7 {1.8}
	45	1.5	15.8	20.3	19.9 {2.03}
	50	1.6	20.8	22.5	22.1 {2.25}
	60	1.6	20.8	27	26.5 {2.7}
	70	1.7	26.4	31.5	30.9 {3.15}
	80	1.7	26.4	36	35.3 {3.6}

[ ! ] Both ends of * marked UF Type springs are not ground.
[!] Usage Count: 1 million times

kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf]=N × 0.101972

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

[!] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).

■Spring Constant (N/mm) [kgf/mm]
[ ! ] D12 is applicable to UY, UR, and UF Types only.

Type

SL-UV

SL-UY

SL-UR

SL-UF

SL-UM

SL-UH

SH-UV

SH-UY

SH-UR

SH-UF

SH-UM

SH-UH

SHD-UV

SHD-UY

SHD-UR

SHD-UF

SHD-UM

SHD-UH

0.05 {0.005}

0.2 {0.02}

0.3 {0.03}

0.05
{0.005}

0.098
{0.01}

0.29
{0.03}

0.49
{0.05}

2
{0.2}

2.9 {0.3}

2.9
{0.3}

5.9
{0.6}

0.2
{0.02}

9.8
{1.0}

0.3 {0.03}

0.5 {0.05}

0.98 {0.1}

4.9 {0.5}

14.7 {1.5}

Fmax.

F = L × 70%

F = L × Fa%

F = L × 45%

F = L × Fa%

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
SH-UF2-15
SH-UF2-20
SH-UF2-25
SH-UF2-30
SH-UF3-10
SH-UF3-15
SH-UF3-20
SH-UF4-10
SH-UF4-15
SH-UF4-20
SH-UF5-10
SH-UF5-15
SH-UF5-20
SH-UF6-10
SH-UF6-15
SH-UF6-20
SH-UF8-10
SH-UF8-15
SH-UF8-20
SH-UF10-10
SH-UF10-15
SH-UF10-20
SH-UF12-15
SH-UF12-20
SH-UF13-15
SH-UF13-20
SH-UF16-15
SH-UF16-20
SH-UR2-20
SH-UR2-25
SH-UR2-30
SH-UR3-10
SH-UR3-15
SH-UR3-20
SH-UR3-25
SH-UR4-10
SH-UR4-15
SH-UR4-20
SH-UR4-25
SH-UR5-10
SH-UR5-15
SH-UR5-20
SH-UR5-25
SH-UR6-10
SH-UR6-15
SH-UR6-20
SH-UR6-25
SH-UR8-10
SH-UR8-15
SH-UR8-20
SH-UR8-25
SH-UR10-10
SH-UR10-15
SH-UR10-20
SH-UR10-25
SH-UR12-15
SH-UR12-20
SH-UR12-25
SH-UR13-15
SH-UR13-20

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Free Length L (mm)	Outer Dia. D (or D1) (Ø)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Cleaning Method	Allowable Displacement (mm)	End Face State	Maximum Height when Loaded (Free Length, Allowable Deflection) (mm)
109,325 IDR	1 Piece(s)	Available	18 Day(s) or more	15	2	0.3	1.51~4.50	2	0.26	7.8	Precision Cleaning	6.7	No Grinding	8.3
109,325 IDR	1 Piece(s)	Available	18 Day(s) or more	20	2	0.3	1.51~4.50	2.7	0.26	7.8	Precision Cleaning	9	No Grinding	11
122,186 IDR	1 Piece(s)	Available	18 Day(s) or more	25	2	0.3	1.51~4.50	3.3	0.29	13.6	Precision Cleaning	11.2	No Grinding	13.8
122,186 IDR	1 Piece(s)	Available	18 Day(s) or more	30	2	0.3	1.51~4.50	4	0.29	13.6	Precision Cleaning	13.5	No Grinding	16.5
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	10	3	0.49	1.51~4.50	2.2	0.32	4.5	Precision Cleaning	4.5	No Grinding	5.5
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	15	3	0.49	1.51~4.50	3.2	0.32	4.5	Precision Cleaning	6.7	No Grinding	8.3
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	20	3	0.49	1.51~4.50	4.4	0.35	6.3	Precision Cleaning	9	No Grinding	11
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	4	0.49	1.51~4.50	2.2	0.35	3	Precision Cleaning	4.5	No Grinding	5.5
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	4	0.49	1.51~4.50	3.2	0.4	5.2	Precision Cleaning	6.7	No Grinding	8.3
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	4	0.49	1.51~4.50	4.4	0.4	5.2	Precision Cleaning	9	No Grinding	11
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	5	0.49	1.51~4.50	2.2	0.4	3.2	Precision Cleaning	4.5	No Grinding	5.5
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	5	0.49	1.51~4.50	3.3	0.4	3.2	Precision Cleaning	6.75	No Grinding	8.25
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	5	0.49	1.51~4.50	4.4	0.45	4.95	Precision Cleaning	9	No Grinding	11
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	6	0.49	1.51~4.50	2.2	0.5	5	Precision Cleaning	4.5	No Grinding	5.5
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	6	0.49	1.51~4.50	3.2	0.55	7.7	Precision Cleaning	6.7	No Grinding	8.3
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	6	0.49	1.51~4.50	4.4	0.55	7.7	Precision Cleaning	9	No Grinding	11
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	10	8	0.49	1.51~4.50	2.2	0.6	5.4	Precision Cleaning	4.5	With Grinding	5.5
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	15	8	0.49	1.51~4.50	3.2	0.65	7.2	Precision Cleaning	6.7	With Grinding	8.3
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	20	8	0.49	1.51~4.50	4.4	0.7	10.5	Precision Cleaning	9	With Grinding	11
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	10	10	0.49	1.51~4.50	2.2	0.65	4.6	Precision Cleaning	4.5	With Grinding	5.5
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	15	10	0.49	1.51~4.50	3.2	0.65	4.6	Precision Cleaning	6.7	With Grinding	8.3
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	20	10	0.49	1.51~4.50	4.4	0.8	9.6	Precision Cleaning	9	With Grinding	11
122,186 IDR	1 Piece(s)	Available	18 Day(s) or more	15	12	0.49	1.51~4.50	3.2	0.8	6.8	Precision Cleaning	6.7	With Grinding	8.3
122,186 IDR	1 Piece(s)	Available	18 Day(s) or more	20	12	0.49	1.51~4.50	4.4	0.8	6.8	Precision Cleaning	9	With Grinding	11
93,891 IDR	1 Piece(s)	Available	18 Day(s) or more	15	13	0.49	1.51~4.50	3.2	0.8	5.6	Precision Cleaning	6.7	With Grinding	8.3
93,891 IDR	1 Piece(s)	Available	18 Day(s) or more	20	13	0.49	1.51~4.50	4.4	0.8	5.6	Precision Cleaning	9	With Grinding	11
102,894 IDR	1 Piece(s)	Available	18 Day(s) or more	15	16	0.49	1.51~4.50	3.2	0.9	5.6	Precision Cleaning	6.7	With Grinding	8.3
102,894 IDR	1 Piece(s)	Available	18 Day(s) or more	20	16	0.49	1.51~4.50	4.4	1	7.7	Precision Cleaning	9	With Grinding	11
93,891 IDR	1 Piece(s)	Available	18 Day(s) or more	20	2	0.2	1.51~4.50	2	0.23	6	Precision Cleaning	10	No Grinding	10
101,608 IDR	1 Piece(s)	Available	18 Day(s) or more	25	2	0.2	1.51~4.50	2.5	0.26	11.2	Precision Cleaning	12.5	No Grinding	12.5
101,608 IDR	1 Piece(s)	Available	18 Day(s) or more	30	2	0.2	1.51~4.50	2.9	0.26	11.2	Precision Cleaning	15	No Grinding	15
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	10	3	0.29	1.51~4.50	1.8	0.25	2.1	Precision Cleaning	6	No Grinding	4
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	15	3	0.29	1.51~4.50	2.6	0.3	4.5	Precision Cleaning	9	No Grinding	6
81,029 IDR	1 Piece(s)	Available	18 Day(s) or more	20	3	0.29	1.51~4.50	3.5	0.3	4.5	Precision Cleaning	12	No Grinding	8
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	25	3	0.29	1.51~4.50	4.4	0.32	6.4	Precision Cleaning	15	No Grinding	10
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	4	0.29	1.51~4.50	1.8	0.29	2	Precision Cleaning	6	No Grinding	4
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	4	0.29	1.51~4.50	2.6	0.32	3	Precision Cleaning	9	No Grinding	6
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	4	0.29	1.51~4.50	3.5	0.38	6.1	Precision Cleaning	12	No Grinding	8
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	25	4	0.29	1.51~4.50	4.4	0.38	6.1	Precision Cleaning	15	No Grinding	10
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	5	0.29	1.51~4.50	1.8	0.35	2.71	Precision Cleaning	6	No Grinding	4
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	5	0.29	1.51~4.50	2.6	0.38	3.61	Precision Cleaning	9	No Grinding	6
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	5	0.29	1.51~4.50	3.5	0.38	3.61	Precision Cleaning	12	No Grinding	8
86,174 IDR	1 Piece(s)	Available	18 Day(s) or more	25	5	0.29	1.51~4.50	4.4	0.45	7.43	Precision Cleaning	15	No Grinding	10
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	10	6	0.29	1.51~4.50	1.8	0.4	3	Precision Cleaning	6	No Grinding	4
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	15	6	0.29	1.51~4.50	2.6	0.4	3	Precision Cleaning	9	No Grinding	6
84,887 IDR	1 Piece(s)	Available	18 Day(s) or more	20	6	0.29	1.51~4.50	3.5	0.5	7	Precision Cleaning	12	No Grinding	8
86,174 IDR	1 Piece(s)	Available	18 Day(s) or more	25	6	0.29	1.51~4.50	4.4	0.5	7	Precision Cleaning	15	No Grinding	10
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	10	8	0.29	1.51~4.50	1.8	0.45	2.6	Precision Cleaning	6	No Grinding	4
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	15	8	0.29	1.51~4.50	2.6	0.5	3.6	Precision Cleaning	9	No Grinding	6
90,032 IDR	1 Piece(s)	Available	18 Day(s) or more	20	8	0.29	1.51~4.50	3.5	0.5	3.6	Precision Cleaning	12	No Grinding	8
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	25	8	0.29	1.51~4.50	4.4	0.55	5.9	Precision Cleaning	15	No Grinding	10
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	10	10	0.29	1.51~4.50	1.8	0.55	3.3	Precision Cleaning	6	No Grinding	4
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	15	10	0.29	1.51~4.50	2.6	0.6	4.2	Precision Cleaning	9	No Grinding	6
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	20	10	0.29	1.51~4.50	3.5	0.65	6.2	Precision Cleaning	12	No Grinding	8
91,318 IDR	1 Piece(s)	Available	18 Day(s) or more	25	10	0.29	1.51~4.50	4.4	0.65	6.2	Precision Cleaning	15	No Grinding	10
101,608 IDR	1 Piece(s)	Available	18 Day(s) or more	15	12	0.29	1.51~4.50	2.6	0.6	3.5	Precision Cleaning	9	No Grinding	6
101,608 IDR	1 Piece(s)	Available	18 Day(s) or more	20	12	0.29	1.51~4.50	3.5	0.7	5.6	Precision Cleaning	12	No Grinding	8
101,608 IDR	1 Piece(s)	Available	18 Day(s) or more	25	12	0.29	1.51~4.50	4.4	0.7	5.6	Precision Cleaning	15	No Grinding	10
93,891 IDR	1 Piece(s)	Available	18 Day(s) or more	15	13	0.29	1.51~4.50	2.6	0.7	4.7	Precision Cleaning	9	No Grinding	6
93,891 IDR	1 Piece(s)	Available	18 Day(s) or more	20	13	0.29	1.51~4.50	3.5	0.7	4.7	Precision Cleaning	12	No Grinding	8

1
2
3
4
5
Next >>

Basic Information

Type	Round Wire	Characteristics/Applications	RoHS Compliant (10 Substances)	Environmentally friendly	RoHS Compliant (10 Substances)

Configure

300 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Free Length L(mm)
5

10

15

20

25

30

35

40

45

50

60

70

80
Clear
Outer Dia. D (or D1)(Ø)
2

3

4

5

6

8

10

12

13

16

20
Clear
Spring Constant(N/mm)
0.05

0.098

0.2

0.29

0.3

0.49

0.5

0.98
Clear
Max. Load(N)
0.15

0.18

0.29

0.34

0.35

0.37

0.44

0.49

0.53

0.59

0.66

0.7

0.74

0.88

0.9

0.98

1.05

1.1

1.18

1.23

1.3

1.4

1.47

1.5

1.58

1.75

1.77

1.8

1.84

2

2.06

2.2

2.206

2.21

2.26

2.5

2.55

2.6

2.7

2.9

2.94

2.942

3.2

3.3

3.33

3.43

3.5

3.53

3.68

4

4.4

4.41

5.1

5.15

5.3

5.49

5.5

5.88

5.9

6.2

6.3

6.6

6.62

6.7

7.1

7.35

7.4

7.6

7.65

7.7

7.8

7.9

8.8

8.83

8.9

9.8

9.9

10

10.3

10.6

10.8

11.03

11.1

11.2

11.6

11.77

11.8

12.4

12.7

13.2

13.24

13.4

14.1

14.7

15.45

15.5

17.65

17.7

19.9

20.6

22.1

23.5

26.5

30.9

35.3
Clear
Wire Dia.(Ø)
0.13

0.15

0.16

0.18

0.2

0.23

0.25

0.26

0.29

0.3

0.32

0.35

0.38

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7
Clear
Solid Length(mm)
0.92

1.05

1.1

1.15

1.2

1.24

1.4

1.5

1.6

1.65

1.7

1.8

1.82

1.84

1.9

2

2.01

2.1

2.19

2.2

2.35

2.5

2.6

2.64

2.7

2.71

2.86

2.9

3

3.15

3.2

3.25

3.3

3.4

3.45

3.5

3.6

3.61

3.75

3.85

4.16

4.2

4.3

4.4

4.5

4.6

4.64

4.7

4.9

4.95

5

5.2

5.32

5.4

5.44

5.53

5.6

5.9

6

6.1

6.15

6.2

6.24

6.3

6.4

6.5

6.8

7

7.2

7.35

7.43

7.5

7.7

7.75

7.8

8

8.25

8.3

8.4

8.45

8.5

9.1

9.3

9.5

9.6

9.8

10.4

10.5

10.8

11

11.2

11.9

12

12.1

12.25

12.4

12.7

12.8

13.5

13.6

14

14.3

14.4

14.45

15.2

15.4

15.5

15.6

15.8

16.2

17

17.4

18

18.4

19

19.5

19.53

19.6

20.4

20.8

21

21.5

22.6

23

23.1

23.4

26

26.4

27

27.6

27.95

28

30

30.8

35

39.6
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Allowable Displacement(mm)
2.25

2.5

3

3.5

3.75

4.5

5

6

6.7

6.75

7.5

9

10

10.5

11.2

11.25

11.3

12

12.5

13.5

15

15.7

15.75

15.8

18

18.75

20

20.25

20.3

21

22

22.5

22.52

24

26.25

27

30

31

31.5

33.75

35

36

37.5

40

42

45

48

52.5

60
Clear
End Face State
- No Grinding
- With Grinding
Clear
Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)
1.25

1.5

2

2.5

2.75

3.75

4

4.5

5

5.5

6

6.25

7.5

8

8.25

8.3

8.75

10

11

11.25

12

12.5

13.7

13.75

13.8

14

15

16

16.5

17.5

18

19.2

19.25

19.3

20

22

23

24

24.7

24.75

25

27.5

28

29

30

32

33

38.5

44
Clear
type
- SH-UF
- SH-UR
- SH-UV
- SH-UY
- SHD-UF
- SHD-UR
- SHD-UV
- SHD-UY
- SL-UF
- SL-UR
- SL-UV
- SL-UY
Clear
Allowable Load (Configurable Range)(N)
- ~1.50
- 1.51~4.50
- 4.51~8.50
- 8.51~16.00
- 16.01~30.00
- 30.01~50.00
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

18 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF

(i)Caution

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Free Length L(mm)

Outer Dia. D (or D1)(Ø)

Spring Constant(N/mm)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Allowable Displacement(mm)

End Face State

Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)

type

Allowable Load (Configurable Range)(N)

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF

(i)Caution

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Free Length L(mm)

Outer Dia. D (or D1)(Ø)

Spring Constant(N/mm)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Allowable Displacement(mm)

End Face State

Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)

type

Allowable Load (Configurable Range)(N)

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB