(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

[Clean & Pack] Small Diameter Locating Pin - Straight (SL-SPKS-D1-L10)

[Clean & Pack] Small Diameter Locating Pin - Straight SL-SPKS-D1-L10

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)    : Part Number SL-□□
·Precision cleaning (Degassing double packing)    : Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Process
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
  • Click here for technical information such as cleaning effects, lineup for other cleaned products and other related information.
  • The price list on this page is as of April 2023. For the latest price, please click the "Confirm Price" button after confirming the part number.

Part Number

Configured Part Number is shown.

SL-SPKS-D1-L10

Tip Shape Selectable
Flat
Taper R

Sphere

SR is Ground

Tapered

Type[M] MaterialCleaning Method
L SelectableL ConfigurableL Configurable and Tolerance SelectableCleaning MethodCleaning EnvironmentPackaging TypePacking Environment
FlatSphereTaperedFlatSphereTaper RTaperedFlatSphereTaper RTapered
SL-SFKSSL-SPKSSL-SXKSSL-SFSSSL-SPSSSL-STSSSL-SXSSSL-SFPSSL-SPPSSL-STPSSL-SXFPS* SUS304DegreasingGeneral environmentAnti-Rust
Packing
General environment
SH-SFKSSH-SPKSSH-SXKSSH-SFSSSH-SPSSSH-STSSSH-SXSSSH-SFPSSH-SPPSSH-STPSSH-SXFPSPrecision cleaningClass 1,000Degassing double
Packing
Class 10
SHD-SFKSSHD-SPKSSHD-SXKSSHD-SFSSSHD-SPSSSHD-STSSSHD-SXSSSHD-SFPSSHD-SPPSSHD-STPSSHD-SXFPSElectrolytic polishing +
Precision cleaning
SL-SPSSG SUS304
 (SR is Ground)
polishing)
DegreasingGeneral environmentAnti-Rust
Packing
General environment
SH-SPSSGPrecision cleaningClass 1,000Degassing double
Packing
Class 10
SHD-SPSSGElectrolytic polishing +
Precision cleaning
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the {{{attr76}}}specification table.
* For L Selectable Type, SUS304 Equivalent is applied.
[ ! ] SUS304 may not be polished.

Specification Table

◦ L Selectable
Part NumberDL
SL-SFKSD1L5
◦ L Configurable
Part NumberDLE  
SL-SPSSD1.5L8.5  (Sphere)
SH-SXSSD1.5L5.0E1.0(Tapered)
◦ L Configurable and Tolerance Selectable
Part Number D L E 
    
Type D Tol.    
SL-SPPS PD0.55L5.0  (Sphere)
SHD-SXFPSPD2.82L5.0E2.5(Tapered)
■L Selectable
Part NumberDD Dim.
Tolerance
L SelectionE
FlatSphereTapered10
−0.005
3456 10  0.5
SL-SFKSSL-SPKSSL-SXKS1.5  568   
SH-SFKSSH-SPKSSH-SXKS2  568101215
SHD-SFKSSHD-SPKSSHD-SXKS3  5681012151
DLMass (g) Ref. Value
SUS303 Equivalent
130.02
40.03
50.03
60.04
100.06
1.550.07
60.08
80.11
250.13
60.15
80.20
100.25
120.30
150.38
350.28
60.34
80.45
100.57
120.68
150.85
■ L Configurable
Part NumberD
0.1 mm Increments
D Dim.
Tolerance
L
0.5 mm Increments
E
0.5 mm Increments
R
FlatSphereTaper RTapered1.0 to 2.0

0

−0.005
3.0 to 30.00.5 to 2.50.2
SL-SFSSSL-SPSSSL-STSSSL-SXSS
SH-SFSSSH-SPSSSH-STSSSH-SXSS
SHD-SFSSSHD-SPSSSHD-STSSSHD-SXSS
 SL-SPSSG  
 SH-SPSSG  
 SHD-SPSSG  2.1 to 3.00.4
[ ! ] For Taper R, L−1 ≥ (D × 1.85) − (R × 2.75) [ ! ] For Tapered, L ≥ E + 1 D ≥ E
■L Configurable and Tolerance Selectable
Part NumberD
0.1 mm Increments
L
0.1 mm Increments
E
0.5 mm Increments
R
TypeD Tolerance
    P +0.005

0

Q ±0.002
R 0
  −0.005
H 0
  −0.01
0.50 to 1.003.0 to 30.00.5 to 2.5
FlatSphereTaper RTapered1.01 to 2.003.0 to 30.00.2
SL-SFPSSL-SPPSSL-STPSSL-SXFPS
SH-SFPSSH-SPPSSH-STPSSH-SXFPS
SHD-SFPSSHD-SPPSSHD-STPSSHD-SXFPS
    2.01 to 3.000.4
[ ! ] For Taper R, L−1 ≥ (D × 1.85) − (R × 2.75) [ ! ] For Tapered, L ≥ E + 1, D ≥ E

Alterations

[NG] Combination of GDC and CC is not available. [NG] Not applicable to L Selectable Type
Alterations
Code
Alteration DetailsApplication ConditionsOrdering Example
GDCInsertion Guide
Adds the insertion guide.
[ ! ] Machines one side only for Flat Type.
[ ! ] Applicable when D ≥ 2.1 and L ≥ 5.0 for L Configurable Type
[ ! ] Applicable when D ≥ 2.01 and L ≥ 5.0 for L Configurable and Tolerance Selectable Type
SL-SFSS-D2.1-L10-GDC
CCC Chamfered Size
D dimension C chamfering 0.1 is changed to 0.3.
[ ! ] L Configurable Type is applicable to D ≥ 1.5
[ ! ] L Configurable and Tolerance Type are applicable to D ≥ 1.50
SL-SFSS-D2.1-L10-CC
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water
 
 

Pure water cleaning followed by
ultrasonic pure water cleaning
*3 times
Dry
 
 

Anti-rust single packing
 
 
·Precision cleaning (Part Number: SH-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning
Ro water cleaning
 

 

High-pressure jet washing (Ro water) followed by
pure water (10 MΩ·cm) cleaning

 

Use pure water (13 MΩ·cm)
 

 

Use nitrogen blow

 

 

Conducted on a clean bench
in a Class 10 clean environment
 
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning
Ro water cleaning

 


 

Electrolytic polishing with an electrolytic polishing layer according to the material


 

High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning


 

Use warm pure water (13 MΩ·cm)

 


 

Use nitrogen blow


 


 

Conducted on a clean bench in a Class
10 clean environment
 
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[!] Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal
Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction
Vacuum environment
Clean environment (Class 10 to 1,000)
Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SL-SPKS-D1-L10
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipInsertion Guide Tip Type Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(mm)
Mounting Side Tolerance Cleaning Method Overall Length L
(mm)
Taper Length E
(mm)
Material Certificate: Materials

176,206 IDR

1 Piece(s)Available 11 Day(s) or more Spherical[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Degreasing10-SUS304

Loading...

  1. 1

Basic Information

Basic Shape Straight Environmentally friendly RoHS Compliant (10 Substances) Characteristics/Applications Clean Washed
Insertion Guide Tip Shape Round Insertion Guide Specifications Not Provided Mounting Side Shape Straight (Press-Fit)
Surface Treatment Not Provided Heat Treatment Not Provided Material Certificate Available

Please check the type/dimensions/specifications of the part SL-SPKS-D1-L10 in the [Clean & Pack] Small Diameter Locating Pin - Straight series.

Products like this...

Part Number
SH-SFKS-D1-L5
SH-SFKS-D1-L6
SH-SFKS-D1.5-L5
SL-SPKS-D1-L3
SL-SPKS-D1-L4
SL-SPKS-D1-L5
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipInsertion Guide Tip Type Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(mm)
Mounting Side Tolerance Cleaning Method Overall Length L
(mm)
Taper Length E
(mm)
Material Certificate: Materials

154,341 IDR

1 Piece(s)Available 11 Day(s) or more Flat[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Precision Cleaning5--

154,341 IDR

1 Piece(s)Available 11 Day(s) or more Flat[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Precision Cleaning6--

154,341 IDR

1 Piece(s)Available 12 Day(s) or more Flat[Stainless Steel] SUS304 Equivalent1.50/-0.005-0/-0.005Precision Cleaning5--

176,206 IDR

1 Piece(s)Available 11 Day(s) or more Spherical[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Degreasing3-SUS304

176,206 IDR

1 Piece(s)Available 11 Day(s) or more Spherical[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Degreasing4-SUS304

176,206 IDR

1 Piece(s)Available 11 Day(s) or more Spherical[Stainless Steel] SUS304 Equivalent10/-0.005-0/-0.005Degreasing5-SUS304

Tech Support