(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

  • Update Stock
  • Highlight from Us
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Quote

Part Number Checker

?

This translation is a Google translation Terjemahan ini adalah terjemahan Google

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 24/11/2024 sampai dengan 6:00 pada tanggal 25/11/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (WIB) 25/11/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

  • How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

    How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

    CommentsSaran
    Name (Optional)Nama (tidak wajib)
    E-mail Address (Optional)E-mail (tidak wajib)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy     Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
    Kebijakan Privacy

    Thank you for your cooperation.Terima kasih atas kerjasama anda.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.
    Customer Privacy Policy     Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
    Silahkan pergunakan Forms Permintaan.
    Kebijakan Privacy

Timing Belts S8M (C-HTBN1400S8M-400)

Timing Belts S8M C-HTBN1400S8M-400
  • Volume Discount
Check FAQ of this product (7 items)

MISUMI

MiSUMi Economy 60

MISUMI

Timing Belts S8M
It is a round tooth profile rubber timing belt. This belt always uses for high torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: S8M (round tooth profile)
• Tooth Pitch: 8 mm.
• Belt Width: 15, 25, 30 and 40 mm.
• Circumference Length Shortest/Longest: 400 mm. and 4400 mm.
• Belt Operating Temperature Range: －30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Backing cloth layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine

Part Number

Configured Part Number is shown.

C-HTBN1400S8M-400



Economy S8M Timing Belt

Minimizing VibrationTemperature RangeExceptional Torque

- With increased belt width options and a wider range of lengths, our S8M belts are built to handle the toughest conditions and heavy loads.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The accurately designed circular tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

- Designed to handle extremely high torque loads, these S8M belts are engineered for heavy-duty applications where maximum power transmission is required.

Economy S8M Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Dimensional drawing of MISUMI economic type belt

■Material/Specification Table
 Material
① Rear rubberChloroprene
② Tooth rubber
③ Core wireGlass Fiber
④ Backing clothNylon canvas

Specifications Overview

TypesTooth pitchRaLrHhiPLDUnit weight g/m
(Width: 10mm)
S8M85.25.25.33.052.250.68652
Belt circumference length is core wire length.
C-HTBN belt operating temperature range: -30 to 90 ℃.
The model engraved on the back of the product is the manufacturer model.
MISUMI makes no commitment to this product brand.
For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Economic type Toothed timing belt S2M S3M S5M S8M S14M type Ordering example

■C-HTBN
■Type S8M (Tooth pitch: 8mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-HTBN288S8M150
(15mm)

250
(25mm)

300
(30mm)

400
(40mm)		36288
328S8M41328
352S8M44352
376S8M47376
384S8M48384
392S8M49392
400S8M50400
408S8M51408
416S8M52416
424S8M53424
432S8M54432
440S8M55440
448S8M56448
456S8M57456
464S8M58464
472S8M59472
480S8M60480
488S8M61488
496S8M62496
512S8M64512
520S8M65520
528S8M66528
536S8M67536
544S8M68544
552S8M69552
560S8M70560
576S8M72576
584S8M73584
592S8M74592
600S8M75600
608S8M76608
616S8M77616
624S8M78624
632S8M79632
640S8M80640
648S8M81648
656S8M82656
664S8M83664
672S8M84672
680S8M85680
688S8M86688
696S8M87696
704S8M88704
712S8M89712
720S8M90720
728S8M91728
736S8M92736
744S8M93744
752S8M94752
760S8M95760
768S8M96768
776S8M97776
784S8M98784
792S8M99792
800S8M100800
808S8M101808
816S8M102816
824S8M103824
832S8M104832
840S8M105840
848S8M106848
856S8M107856
864S8M108864
872S8M109872
880S8M110880
888S8M111888
896S8M112896
904S8M113904
912S8M114912
920S8M115920
928S8M116928
936S8M117936
944S8M118944
952S8M119952
960S8M120960
968S8M121968
976S8M122976
984S8M123984
992S8M124992
1000S8M1251000
1008S8M1261008
1016S8M1271016
1024S8M1281024
1032S8M1291032
1040S8M1301040
1048S8M1311048
1056S8M1321056
1064S8M1331064
1072S8M1341072
1080S8M1351080
1088S8M1361088
1096S8M1371096
1104S8M1381104
1112S8M1391112
1120S8M1401120
1128S8M1411128
1136S8M1421136
1144S8M1431144
1152S8M1441152
1160S8M1451160
1168S8M1461168
1176S8M1471176
1184S8M1481184
1192S8M1491192
1200S8M1501200
1208S8M1511208
1216S8M1521216
1224S8M1531224
1232S8M1541232
1240S8M1551240
1248S8M1561248
1256S8M1571256
1264S8M1581264
1272S8M1591272
1280S8M1601280
1296S8M1621296
1304S8M1631304
1312S8M1641312
1320S8M1651320
1328S8M1661328
1336S8M1671336
1344S8M1681344
1352S8M1691352
1360S8M1701360
1376S8M1721376
1384S8M1731384
1392S8M1741392
1400S8M1751400
1424S8M1781424
1432S8M1791432
1440S8M1801440
1480S8M1851480
1504S8M1881504
1512S8M1891512
1520S8M1901520
1528S8M1911528
1536S8M1921536
1544S8M1931544
1552S8M1941552
1560S8M1951560
1568S8M1961568
1576S8M1971576
1584S8M1981584
1592S8M1991592
1600S8M2001600
1608S8M2011608
1624S8M2031624
1632S8M2041632
1640S8M2051640
1648S8M2061648
1672S8M2091672
1680S8M2101680
1688S8M2111688
1696S8M2121696
1728S8M2161728
1760S8M2201760
1776S8M2221776
1792S8M2241792
1800S8M2251800
1816S8M2271816
1824S8M2281824
1832S8M2291832
1840S8M2301840
1880S8M2351880
1896S8M2371896
1904S8M2381904
1912S8M2391912
1920S8M2401920
1928S8M2411928
1936S8M2421936
1952S8M2441952
1960S8M2451960
2000S8M2502000
2016S8M2522016
2032S8M2542032
2040S8M2552040
2048S8M2562048
2056S8M2572056
2080S8M2602080
2104S8M2632104
2120S8M2652120
2136S8M2672136
2160S8M2702160
2200S8M2752200
2240S8M2802240
2256S8M2822256
2272S8M2842272
2288S8M2862288
2296S8M2872296
2304S8M2882304
2320S8M2902320
2400S8M3002400
2432S8M3042432
2448S8M3062448
2464S8M3082464
2496S8M3122496
2504S8M3132504
2520S8M3152520
2536S8M3172536
2560S8M3202560
2600S8M3252600
2624S8M3282624
2680S8M3352680
2736S8M3422736
2760S8M3452760
2800S8M3502800
2848S8M3562848
2880S8M3602880
2904S8M3632904
2920S8M3652920
2944S8M3682944
3000S8M3753000
3048S8M3813048
3120S8M3903120
3200S8M4003200
3264S8M4083264
3280S8M4103280
3304S8M4133304
3400S8M4253400
3440S8M4303440
3600S8M4503600
3680S8M4603680
3800S8M4753800
3880S8M4853880
4000S8M5004000
4400S8M5504400
5280S8M6605280

Product Feature

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt ■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
Trapezoidal tooth profile timing belt is suitable for light load transmission and driving ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
110302717070 Water110302717070 Acid110302717070 Alkali110302717070 Oil110302717070 UV
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smartphone
110302717070 Lithium battery 110302717070 Semiconductor 110302717070 Smart phone
Automotive Electronic & Electrical Appliances Medical
110302717070 Automotive 110302717070 Electronic & electrical appliances 110302717070 Medical

Related Products

High Torque Timing Pulleys S2M Type Flat Belt (Economy Series) Toothed Timing Belt MXL XL L H Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economic type Domestic timing belt Low price Short delivery time
Typical model: HTPA48S2M040-B-N10 Typical model: HBLT350-4.23 Typical model: C-TBN236MXL025


Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
C-HTBN1400S8M-400
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBelt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

348,715 IDR

1 Piece(s)Available 17 Day(s) 401400175

Loading...

  1. 1

Basic Information

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Core Wire Material Glass Fiber Belt Type S8M Belt Shape Type Round Tooth Profile Super Torque
Transmission Torque High Torque Transmission

Please check the type/dimensions/specifications of the part C-HTBN1400S8M-400 in the Timing Belts S8M series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • type

    • C-HTBN□□S8M

    Clear

  • Belt Width (mm)(mm)

    • 15
    • 25
    • 30
    • 40

    Clear

  • Circumference Length(mm)

    • 376
    • 400
    • 408
    • 424
    • 432
    • 440
    • 464
    • 480
    • 496
    • 512
    • 520
    • 528
    • 560
    • 584
    • 592
    • 600
    • 608
    • 616
    • 632
    • 640
    • 656
    • 672
    • 680
    • 704
    • 712
    • 720
    • 728
    • 736
    • 744
    • 752
    • 760
    • 768
    • 776
    • 784
    • 792
    • 800
    • 816
    • 824
    • 832
    • 840
    • 848
    • 856
    • 880
    • 888
    • 896
    • 904
    • 912
    • 920
    • 928
    • 944
    • 952
    • 960
    • 976
    • 984
    • 992
    • 1000
    • 1008
    • 1016
    • 1024
    • 1032
    • 1040
    • 1048
    • 1056
    • 1072
    • 1080
    • 1088
    • 1096
    • 1104
    • 1112
    • 1120
    • 1128
    • 1136
    • 1144
    • 1152
    • 1160
    • 1168
    • 1184
    • 1192
    • 1200
    • 1216
    • 1224
    • 1240
    • 1248
    • 1256
    • 1264
    • 1280
    • 1296
    • 1304
    • 1312
    • 1320
    • 1344
    • 1352
    • 1360
    • 1376
    • 1384
    • 1392
    • 1400
    • 1424
    • 1440
    • 1480
    • 1504
    • 1512
    • 1520
    • 1544
    • 1552
    • 1560
    • 1568
    • 1592
    • 1600
    • 1624
    • 1640
    • 1648
    • 1672
    • 1680
    • 1688
    • 1696
    • 1728
    • 1760
    • 1776
    • 1792
    • 1800
    • 1816
    • 1824
    • 1832
    • 1880
    • 1896
    • 1904
    • 1912
    • 1920
    • 1952
    • 1960
    • 2000
    • 2032
    • 2040
    • 2048
    • 2056
    • 2080
    • 2104
    • 2120
    • 2136
    • 2160
    • 2200
    • 2240
    • 2272
    • 2296
    • 2304
    • 2400
    • 2496
    • 2560
    • 2600
    • 2624
    • 2800
    • 2848
    • 2880
    • 2944
    • 3000
    • 3048
    • 3200
    • 3280
    • 3400
    • 3440
    • 3600
    • 3680
    • 4000
    • 4200
    • 4400
    • 5280

    Clear

  • Number of Teeth

    • 47
    • 50
    • 51
    • 53
    • 54
    • 55
    • 58
    • 60
    • 62
    • 64
    • 65
    • 66
    • 70
    • 73
    • 74
    • 75
    • 76
    • 77
    • 79
    • 80
    • 82
    • 84
    • 85
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 107
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 118
    • 119
    • 120
    • 122
    • 123
    • 124
    • 125
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 135
    • 136
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 145
    • 146
    • 148
    • 149
    • 150
    • 152
    • 153
    • 155
    • 156
    • 157
    • 158
    • 160
    • 162
    • 163
    • 164
    • 165
    • 168
    • 169
    • 170
    • 172
    • 173
    • 174
    • 175
    • 178
    • 180
    • 185
    • 188
    • 189
    • 190
    • 193
    • 194
    • 195
    • 196
    • 199
    • 200
    • 203
    • 205
    • 206
    • 209
    • 210
    • 211
    • 212
    • 216
    • 220
    • 222
    • 224
    • 225
    • 227
    • 228
    • 229
    • 235
    • 236
    • 237
    • 238
    • 239
    • 240
    • 244
    • 245
    • 250
    • 254
    • 255
    • 256
    • 257
    • 260
    • 265
    • 267
    • 270
    • 275
    • 280
    • 284
    • 287
    • 288
    • 300
    • 312
    • 320
    • 325
    • 328
    • 350
    • 356
    • 360
    • 368
    • 375
    • 381
    • 400
    • 410
    • 425
    • 430
    • 450
    • 460
    • 500
    • 525
    • 550
    • 660

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • Same day
    • 10 Day(s) or Less
    • 14 Day(s) or Less
    • 16 Day(s) or Less
    • 17 Day(s) or Less
    • 18 Day(s) or Less

    Clear

Specify Alterations

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?
Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?
Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Products like this...

Part Number
C-HTBN1000S8M-400
C-HTBN1008S8M-150
C-HTBN1008S8M-250
C-HTBN1424S8M-150
C-HTBN1424S8M-250
C-HTBN1424S8M-300
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBelt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

249,686 IDR

1 Piece(s)Available Same day 401000125

98,299 IDR

1 Piece(s)Available 17 Day(s) 151008126

162,389 IDR

1 Piece(s)Available 17 Day(s) 251008126

137,935 IDR

1 Piece(s)Available 17 Day(s) 151424178

228,600 IDR

1 Piece(s)Available 17 Day(s) 251424178

273,963 IDR

1 Piece(s)Available 17 Day(s) 301424178

Tech Support

Technical Inquiry

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

  • Bank TransferTransfer Bank
    • QRIS

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

  • Tel:021-8984-0008
  • Fax:021-8984-0007
Inquiry Permintaan
Mobile View Tampilan Mobile

Copyright © MISUMI Corporation All Rights Reserved.