(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 19/1/2025 sampai dengan 5:00 pada tanggal 20/1/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 19/1/2025 to 5:00 (WIB) 20/1/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Shock Absorbers, Adjustable Damping
- Volume Discount
- Shock Absorbers, Adjustable Damping Type from MISUMI
- Simple structure and easy installation.
- Miniaturized design and strong space adaptability.
- Absorb energy smoothly and softly.
- Extend mechanical life, The service life of Shock Absorbers from MISUMI is up to 800,000 times.
- Max. Collision Velocity(m/s): 4 m/s
- Operating Environment Temperature: -5 to 70℃
- The products of M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.
Part Number
Configured Part Number is shown.
Shock Absorber - Adjustable Damping
- Adjustable damping feature allows fine-tuning of the absorption capacity, ensuring optimal performance for various applications.
- Capable of handling collision velocities up to specified maximum.
- Operates effectively within specified temperature range.
- Designed for a long service life, with up to 800,000 cycles. Reduces the need for frequent replacements, lowering maintenance costs and downtime.
- The miniaturized design allows for easy integration into tight spaces without compromising functionality. Maximizes space utilization, making it suitable for compact machinery and equipment.
Shock Absorbers Product Overview
For the speed change of moving objects, the adjuster can be used to adjust the most appropriate buffering absorption capacity corresponding to it, and the locking device is adopted to ensure the accuracy and effectiveness of the adjuster. With a complete check valve action, the spring can make the piston rod quickly reset.
The advantages of using oil buffers:
1. Improve Shock Absorbers production efficiency: equipment can be operated at high frequency and high speed to improve production efficiency because the oil buffer can stop the impact object smoothly.
2. Extend mechanical life: the buffer can absorb the energy generated by the impact, greatly reduce the impact and vibration caused by the object to the machine, and avoid damage due to impact vibration.
3. Improve product quality: the buffer eliminates the shock caused by impact objects and the damaging impact, allowing the smooth operation of the machine and equipment, and improving the product quality.
4. Significantly reduce noise, and provide a quiet working environment.
5. Improve the Shock Absorbers safety of mechanical running.
Shock Absorbers Product Feature
2. Miniaturized design and strong space adaptability.
3. Shock Absorbers energy smoothly and softly.
4. Abundant stock and fast delivery.
5. Long life with 800,000 times being used for reference.
6. The Shock Absorbers products of M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.
Specifications Shock Absorbers Overview
C-AD**** (with cover type)
C-AD****- N (without cover type)
■Shock Absorbers Model description
Example of Shock Absorbers Use
Drawings of Examples of Shock Absorbers Use are for informational purposes onlyShock Absorbers Precautions
| Coarse Outer Diameter (mm) | M4x0.5 | M6x0.75 | M8x1.0 | M10x1.0 | M12x1.0 | M14x1.5 | M20x1.5 | M25x1.5 | M36x1.5 | M42x1.5 |
| Tightening torque of nut (N.m) | 0.35 | 0.85 | 3.9 | 7.8 | 7.8 | 9.8 | 29.4 | 49 | 98 | 392 |
2. Pay attention to check whether the head circlip is off.
■ Overloaded buffer will cause abnormal increase in the internal pressure of the buffer tube, making the head circlip off, and internal parts may pop up and cause injury.
■ When the buffer with the head circlip is working, please keep your face and other parts away from it.
3. Please pay attention to the splash of the broken buffer head due to impact.
■ Overload use will cause damage to the head, resulting in injury.
■ It is recommended to install an anti-splashing cover.
4. Please pay attention to lateral misalignment load and lateral misalignment angle.
■ When the lateral misalignment load exceeds ±2.5 degrees, it will cause piston rod bending, bad reset, and internal lateral misalignment friction, resulting in performance degradation and even product breakage.
Please aim at the center line of the buffer piston rod for impact. (If the lateral misalignment angle is greater than ±2.5 degrees, please use the angular misalignment Shock Absorbers (the range of lateral misalignment:± within 10 degrees)
5. Operating Temperature Range
■ Please use the buffer within the specified temperature range.
▪ Use outside the specified range will reduce the life of the seal packing and the pressure accumulating sponge, and cause the buffer to break.
6. Operating Environment Requirements
■ Please do not use it under medium or high pressure in a vacuum environment.
■ Keep the guide shaft clean, and avoid cutting powder, cutting fluid, water, etc. from being attached to the guide shaft, otherwise it will cause seal damage, oil leakage, poor buffer action, and buffer damage.
※ If you need to use it in the cutting fluid environment, please choose Misumi’s cutting fluid resistant buffer series products. See Misumi's official website.
8. To prevent the buffer from increasing lateral load, the distance between the installation position of the buffer and the fulcrum should be equal to or greater than 6 times of the buffer stroke.
And when the side load and the buffer center line form an angle of 5°, the absorbed energy is the maximum.
Dimensional Shock Absorbers Drawing
Specification Shock Absorbers Table
■ Specification Shock Absorbers Table of Oil BuffersPart Number |
|
| Mounting Screw Nominal (M) | Stroke (S) | Max. Energy Absorbed(E') | Max. Equivalent Mass (me’) (kg) | Max. Collision Velocity (M/S) | Length (L) | L1 | L2 | T | t | d | d1 | B (Both Surfaces Width) | |||
|
| Per Cycle (J) | Per Minute (J) | Cap provided | Cap not provided | |||||||||||||
| C-AD | 1210 | -
| SC - | M12×1.0 | 10 | 12 | 360 | 35 | 3 | 89.5 | 81 | 61 | 10 | 4 | 8.5 | 10.5 | 3 | 14 |
| 1412 | M14×1.5 | 12 | 21 | 410 | 90 | 2.5 | 107.2 | 95.2 | 70.2 | 13 | 5 | 12 | 12 | 4 | 19 | |||
| 1415 | 15 | 22 | 440 | 120 | 3.2 | 129 | 117 | 89 | ||||||||||
| 1425 | 25 | 28 | 460 | 140 | 154 | 142 | 104 | |||||||||||
| 1612 | M16×1.5 | 12 | 22 | 420 | 150 | 107.2 | 95.2 | 70.2 | 14 | |||||||||
| 2016 | M20×1.5 | 16 | 25 | 530 | 210 | 3 | 148.8 | 133 | 104 | 8 | 15.8 | 18 | 6 | 26 | ||||
| 2020 | 20 | 34 | 580 | 298 | 3.6 | 152.8 | 137 | 100 | 17 | |||||||||
| 2025 | 25 | 39 | 650 | 312 | 157.8 | 142 | ||||||||||||
| 2525 | M25×1.5 | 25 | 85 | 1100 | 450 | 3.5 | 162 | 143.5 | 106 | 12.5 | 10 | 18.5 | 22 | 8 | 32 | |||
| 2540 | 40 | 100 | 1300 | 780 | 221.5 | － | 132 | 37 | ||||||||||
| 2550 | 50 | 98 | 1630 | 720 | 4.2 | 246.5 | 100 | 78 | 18.5 | |||||||||
| 2580 | 80 | 150 | 2100 | 800 | 343 | 144.5 | ||||||||||||
| 2725 | M27×1.5 | 25 | 90 | 1200 | 480 | 3.5 | 162 | 143.5 | 18.5 | |||||||||
| 3625 | M36×1.5 | 150 | 1500 | 1400 | 3.2 | 183 | － | 101 | 22 | 15 | 25 | 35 | 10 | 46 | ||||
| 3650 | 50 | 300 | 1800 | 1450 | 3.5 | 246 | 149 | 35.5 | ||||||||||
Cap
Stopper
Type
No. For larger sizes, see the Economy series Shock Absorbers, Heavy Load Absorption Type catalog page| Shock Absorbers Impact Speed | Maximum Collision Velocity | Operating environment temperature | Reference number of replacements |
| Adjusting type | ～4.2m/s | -5~70℃ | 800,000 times |
■ Specifications Shock Absorbers Table for Anti-loosening Gaskets
| Double-sided tooth disc gaskets | ||||
| Part number | D | d | t | H |
| M14 | 21.2 | 14.6 | 1.5 | 2.0 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Structure | Stroke (mm) | Nominal Mounting Screw [M] | Max. Absorbed Energy (J) | Orifice Type | Body Material | Max. Collision Velocity (m/s) | Overall Length (mm) | Equivalent Mass (kgf) | Max. Absorbed Energy (per Minute) (J/min) | Cap | Mating Accessories 1 - Stopper Nut |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
399,657 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 10 | 12 | 12 | - | [Steel] STKM11A | 3 | 89.5 | 35 | 360 | Provided | Not Provided | |
399,657 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 10 | 12 | 12 | - | [Steel] STKM11A | 3 | 81 | 35 | 360 | Not Provided | Not Provided | |
368,073 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 10 | 12 | 12 | - | - | - | - | - | - | Not Provided | Provided | |
368,536 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 10 | 12 | 12 | - | - | - | - | - | - | Provided | Provided | |
279,323 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 12 | 14 | 21 | Single Orifice | [Steel] STKM11A | 2.5 | 107.2 | 90 | 410 | Provided | Not Provided | |
278,642 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 12 | 14 | 21 | Single Orifice | [Steel] STKM11A | 2.5 | 95.2 | 90 | 410 | Not Provided | Not Provided | |
311,417 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 12 | 14 | 21 | - | - | - | - | - | - | Not Provided | Provided | |
312,100 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 12 | 14 | 21 | - | - | - | - | - | - | Provided | Provided | |
367,134 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 15 | 14 | 22 | - | [Steel] STKM11A | 3.2 | 107.2 | 120 | 440 | Provided | Not Provided | |
367,134 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 15 | 14 | 22 | - | [Steel] STKM11A | 3.2 | 95.2 | 120 | 440 | Not Provided | Not Provided | |
357,046 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 15 | 14 | 22 | - | - | - | - | - | - | Not Provided | Provided | |
357,989 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 15 | 14 | 22 | - | - | - | - | - | - | Provided | Provided | |
406,881 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 25 | 14 | 28 | - | [Steel] STKM11A | 3.2 | 154 | 140 | 460 | Provided | Not Provided | |
406,881 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 25 | 14 | 28 | - | [Steel] STKM11A | 3.2 | 142 | 140 | 460 | Not Provided | Not Provided | |
394,775 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 14 | 28 | - | - | - | - | - | - | Not Provided | Provided | |
395,666 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 14 | 28 | - | - | - | - | - | - | Provided | Provided | |
435,807 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 12 | 16 | 22 | - | [Steel] STKM11A | 3.2 | 107.2 | 150 | 420 | Provided | Not Provided | |
435,807 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 12 | 16 | 22 | - | [Steel] STKM11A | 3.2 | 95.2 | 150 | 420 | Not Provided | Not Provided | |
423,492 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 12 | 16 | 22 | - | - | - | - | - | - | Not Provided | Provided | |
422,071 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 12 | 16 | 22 | - | - | - | - | - | - | Provided | Provided | |
443,842 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 16 | 20 | 25 | Single Orifice | [Steel] STKM11A | 3 | 148.8 | 210 | 530 | Provided | Not Provided | |
440,429 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 16 | 20 | 25 | Single Orifice | [Steel] STKM11A | 3 | 133 | 210 | 530 | Not Provided | Not Provided | |
486,909 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 16 | 20 | 25 | - | - | - | - | - | - | Not Provided | Provided | |
490,322 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 16 | 20 | 25 | - | - | - | - | - | - | Provided | Provided | |
493,628 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 20 | 20 | 34 | - | [Steel] STKM11A | 3.6 | 152.8 | 298 | 580 | Provided | Not Provided | |
493,628 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 20 | 20 | 34 | - | [Steel] STKM11A | 3.6 | 137 | 298 | 580 | Not Provided | Not Provided | |
509,071 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 20 | 20 | 34 | - | - | - | - | - | - | Not Provided | Provided | |
512,602 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 20 | 20 | 34 | - | - | - | - | - | - | Provided | Provided | |
508,106 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 25 | 20 | 39 | - | [Steel] STKM11A | 3.6 | 157.8 | 312 | 650 | Provided | Not Provided | |
508,106 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 25 | 20 | 39 | - | [Steel] STKM11A | 3.6 | 142 | 312 | 650 | Not Provided | Not Provided | |
521,187 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 20 | 39 | - | - | - | - | - | - | Not Provided | Provided | |
524,632 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 20 | 39 | - | - | - | - | - | - | Provided | Provided | |
491,564 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 25 | 25 | 85 | Single Orifice | [Steel] STKM11A | 3.5 | 162 | 450 | 1100 | Provided | Not Provided | |
488,151 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 25 | 25 | 85 | Single Orifice | [Steel] STKM11A | 3.5 | 143.5 | 450 | 1100 | Not Provided | Not Provided | |
565,616 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 25 | 85 | - | - | - | - | - | - | Not Provided | Provided | |
569,029 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 25 | 85 | - | - | - | - | - | - | Provided | Provided | |
547,517 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 40 | 25 | 100 | Single Orifice | [Steel] STKM11A | 3.5 | 221.5 | 780 | 1300 | Provided | Not Provided | |
706,544 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 40 | 25 | 100 | - | - | - | - | - | - | Provided | Provided | |
724,975 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 50 | 25 | 98 | - | [Steel] STKM11A | 4.2 | 246.5 | 720 | 1630 | Provided | Not Provided | |
788,338 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 50 | 25 | 98 | - | - | - | - | - | - | Provided | Provided | |
1,086,444 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 80 | 25 | 150 | - | [Steel] STKM11A | 4.2 | 343 | 800 | 2100 | Provided | Not Provided | |
1,123,592 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 80 | 25 | 150 | - | - | - | - | - | - | Provided | Provided | |
652,676 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 25 | 27 | 90 | - | [Steel] STKM11A | 3.5 | 162 | 480 | 1200 | Provided | Not Provided | |
652,676 IDR | 1 Piece(s) | Available | 15 Day(s) | - | [Adjustable Type] Adjustable | 25 | 27 | 90 | - | [Steel] STKM11A | 3.5 | 143.5 | 480 | 1200 | Not Provided | Not Provided | |
722,888 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 27 | 90 | - | - | - | - | - | - | Not Provided | Provided | |
728,750 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 27 | 90 | - | - | - | - | - | - | Provided | Provided | |
1,014,144 IDR | 1 Piece(s) | Available | Same day | - | [Adjustable Type] Adjustable | 25 | 36 | 150 | - | [Steel] STKM11A | 3.2 | 183 | 1400 | 1500 | Provided | Not Provided | |
1,195,300 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 25 | 36 | 150 | - | - | - | - | - | - | Provided | Provided | |
1,129,251 IDR | 1 Piece(s) | Available | Same day | 10 | [Adjustable Type] Adjustable | 50 | 36 | 300 | Single Orifice | [Steel] STKM11A | 3.5 | 246 | 1450 | 1800 | Provided | Not Provided | |
1,206,721 IDR | 1 Piece(s) | Available | 12 Day(s) | 10 | - | 50 | 36 | 300 | - | - | - | - | - | - | Provided | Provided | |
2,148,721 IDR | 1 Piece(s) | Available | 5 Day(s) | - | [Adjustable Type] Adjustable | 50 | 42 | 500 | Irregular Multi Orifice | [Steel] STKM11A | 4 | 245.5 | 4200 | 2100 | Provided | - |
Loading...
Basic Information
| Main Body, Related Components | Main Body | Operating Environment | Standard | Operating Temperature Range(°C) | -5::70 |
|---|
Specification/Dimensions
-
Structure
- Adjustable Type
- Adjustable Type
-
Stroke(mm)
-
Nominal Mounting Screw [M]
-
Max. Absorbed Energy(J)
-
Orifice Type
-
Body Material
- Steel
- Steel
-
Max. Collision Velocity(m/s)
-
Overall Length(mm)
-
Equivalent Mass(kgf)
-
Max. Absorbed Energy (per Minute)(J/min)
-
Cap
- Not Provided
- Provided
-
Mating Accessories 1 - Stopper Nut
- Not Provided
- Provided
-
type
- C-AD□□□□
- C-AD□□□□-N
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Day(s) or Less
- 12 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What kind of thread does model C-AC0806H match?
- Answer: Buffer model C-AC0806H, product with M8 thread and 6 mm stroke, where the thread type is M8X1.0, please note that the product is fine thread.
- Question: Is the model C-AC0806L a product with a lid, is the lid connected with thread?
- Answer: Buffer model C-AC0806L, the lid is press-fit type, not of thread connection, and cannot be disassembled by yourself.
Tech Support
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy