Blind Joint Components - Nuts for Pre-Assembly Insertion Double Joints Joint Nut for 8 Series (Slot Width 10mm) Aluminum Frames (Part Numbers)

Dimensional Drawing of Blind Joint Parts

HDJRN

Specification Table of Blind Joint Parts

How to Connect of Blind Joint Parts

Blind Joint Parts, This product is used together with a pre-inserted double joint .

[Method of adding additional work to the frame]

Example Blind Joint Parts: When adding a 1000mm aluminum frame to a 4000mm aluminum frame with a cross section of 30x60

1. Drill S holes horizontally on the right side of the 4000mm aluminum frame.2
. Drill D holes horizontally on the left side of the 1000mm aluminum frame.3
. Prepare pre-fit double joints for the number of S holes.4
. Prepare pre-fit double joint nuts for the number of D holes.5
. Prepare 2 hexagon socket bolts for the pre-fit double joint parts.6
. Pass the bolt (5) through the pre-fit double joint (3).7.
Insert the head of the bolt (5) into the S hole, then insert (3) into the S hole.8.
Insert (4) into the D hole of the frame (2) so that the tap is level with the groove.9.
Fasten to (4) with the bolt installed in (7). Do this for the number of grooves on both sides.

How to Use of Blind Joint Parts

Product Comparison Information of Blind Joint Parts

■8 Series Blind Joint Parts

Product name	First-in double joint	Parallel Joint	Center Joint	Screw joint	Single Joint	Tapping Joint	Post-insertion double joint
Product Photos
Installation Diagram
Material Blind Joint Parts	SUS316 equivalent / SUS304	SCS13/SUS304	SCS13	Iron or SUS304	Iron or SUS304	SWCH-18A	Equivalent to SCS13/SUS304
Features Blind Joint Parts	This blind joint can be used for a variety of purposes, such as extending frames or attaching to plates.	The frames can be connected side-by-side.	This is the most common blind joint that can be used with a wide range of aluminium frames.	The plate allows for reliable and inexpensive connection.	Since the additional D hole does not penetrate all the way to the flat surface, this is a blind joint with particularly excellent aesthetics.	No additional tapping holes are required. This is the most inexpensive blind joint.	Stable fastening is possible from two points. This is the strongest fastening possible with blind joints.
8 Series Product Page	Product page	Product page	Product page	Product page	Product page	Product page	Product page
Additional work required for the frame	S hole	L-hole	M hole	Tap holes and wrench holes	Wrench hole / D hole	Wrench Hole	M hole

Related Items of Blind Joint Parts

■8 series (groove width 10mm) of Blind Joint Parts

Product name	Aluminum frame	bracket	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here