(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

MISUMI

[Features]A shaft with a stepped male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

One End Stepped and Threaded:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ] Surface Treatment
One End Stepped and Threaded			Both Ends Stepped and Threaded
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAF	SFUF	-	SFAX	SFUX	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAF	SSFUF	-	SSFAX	SSFUX	-	SUS440C or 13Cr stainless		-
PSFAF	PSFUF	-	PSFAX	PSFUX	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFAF	PSSFUF	-	PSSFAX	PSSFUX	-	SUS440C or 13Cr stainless
RSFAF	-	-	RSFAX	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGF	-	-	PSFGX	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSSFGF	-	-	PSSFGX	SUS304	-

[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	M	-	T	-	S	-	Q	-	N
SFAX20	-	400	-	F30	-	B20	-	P10	-	M8	-	T20	-	S15	-	Q10	-	N8

Part Number			1mm Increment				M (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P	M (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) SFAF SSFAF PSFAF PSSFAF (D Tol. f8) PSFGF PSSFGF	(D Tol. h5) SFUF SSFUF PSFUF PSSFUF	8	25~ 990	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 990				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number			1mm Increment				M (Coarse), N (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) SFAX SSFAX PSFAX PSSFAX (D Tol. f8) PSFGX PSSFGX	(D Tol. h5) SFUX SSFUX PSFUX PSSFUX	8	25~790	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~790				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~990				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px520≤T≤Qx5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Part Number		1mm Increment				M (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P	M (Coarse) Selection							g6	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAF (Ymax≤800)	8	25~500	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment				M (Coarse), N (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection							g6	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAX (Ymax≤800)	8	25~500	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ] F-B(T-S)≥2 is required.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFGF8-[25-790/1]-F[10-42/1]-B[6-30/1]-P7-M6
PSFGF8-[25-790/1]-F[10-42/1]-B[6-30/1]-P7-MMC6
PSFGF10-[25-790/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]
PSFGF10-[25-790/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]
PSFGF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]
PSFGF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]
PSFGF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10
PSFGF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]
PSFGF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]
PSFGF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMS10
PSFGF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-M[6,8,10,12]
PSFGF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-MMC[6,8,10,12]
PSFGF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-MMS[10,12]
PSFGF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-M[6,8,10,12]
PSFGF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,8,10,12]
PSFGF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,12]
PSFGF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,8,10,12,16]
PSFGF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,8,10,12]
PSFGF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,12,14]
PSFGF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-M[6,8,10,12,16]
PSFGF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,8,10,12,16]
PSFGF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMS[10,12,14,18]
PSFGF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-M[8,10,12,16,20]
PSFGF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMC[8,10,12,15,17,20]
PSFGF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMS[10,12,14,18]
PSFGF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-M[8,10,12,16,20,24]
PSFGF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMC[8,10,12,15,17,20,25]
PSFGF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMS[10,12,14,18]
PSFGF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-M[10,12,16,20,24,30]
PSFGF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMC[10,12,15,17,20,25,30]
PSFGF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMS[10,12,14,18]
PSFGF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-M[12,16,20,24,30]
PSFGF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMC[12,15,17,20,25,30]
PSFGF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,14,18]
PSFGF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,20,24,30]
PSFGF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,17,20,25,30]
PSFGF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,18]
PSFGX8-[25-780/1]-F[10-42/1]-B[6-30/1]-P7-M6-T[10-42/1]-S[6-30/1]-Q7-N6
PSFGX8-[25-780/1]-F[10-42/1]-B[6-30/1]-P7-M6-T[10-42/1]-S[6-30/1]-Q7-NMC6
PSFGX8-[25-780/1]-F[10-42/1]-B[6-30/1]-P7-MMC6-T[10-42/1]-S[6-30/1]-Q7-N6
PSFGX8-[25-780/1]-F[10-42/1]-B[6-30/1]-P7-MMC6-T[10-42/1]-S[6-30/1]-Q7-NMC6
PSFGX10-[25-780/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[10-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFGX10-[25-780/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[10-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFGX10-[25-780/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[10-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFGX10-[25-780/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[10-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFGX12-[25-980/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[10-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-NMS10
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFGX13-[25-980/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[10-84/1]-S[6-50/1]-Q[7-12/1]-NMS10

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	End Shape (Right)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 790	f8	No Induction Hardening	6 ～ 30	-	-	-	-	10 ～ 42	7	-	-	-	6	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 790	f8	No Induction Hardening	6 ～ 30	6	-	-	-	10 ～ 42	7	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 790	f8	No Induction Hardening	6 ～ 40	-	-	-	-	10 ～ 63	7 ～ 9	-	-	-	6 ～ 8	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 790	f8	No Induction Hardening	6 ～ 40	6 ～ 8	-	-	-	10 ～ 63	7 ～ 9	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 990	f8	No Induction Hardening	6 ～ 50	-	-	-	-	10 ～ 77	7 ～ 11	-	-	-	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 990	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	-	10 ～ 77	7 ～ 11	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 990	f8	No Induction Hardening	6 ～ 50	-	10	-	-	10 ～ 77	7 ～ 11	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 990	f8	No Induction Hardening	6 ～ 50	-	-	-	-	10 ～ 84	7 ～ 12	-	-	-	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 990	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	-	10 ～ 84	7 ～ 12	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 990	f8	No Induction Hardening	6 ～ 50	-	10	-	-	10 ～ 84	7 ～ 12	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 990	f8	No Induction Hardening	6 ～ 60	-	-	-	-	10 ～ 98	7 ～ 14	-	-	-	6 ～ 12	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 990	f8	No Induction Hardening	6 ～ 60	6 ～ 12	-	-	-	10 ～ 98	7 ～ 14	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 990	f8	No Induction Hardening	6 ～ 60	-	10 ～ 12	-	-	10 ～ 98	7 ～ 14	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1190	f8	No Induction Hardening	6 ～ 60	-	-	-	-	10 ～ 105	7 ～ 15	-	-	-	6 ～ 12	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1190	f8	No Induction Hardening	6 ～ 60	6 ～ 12	-	-	-	10 ～ 105	7 ～ 15	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1190	f8	No Induction Hardening	6 ～ 60	-	10 ～ 12	-	-	10 ～ 105	7 ～ 15	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	-	-	-	-	10 ～ 119	7 ～ 17	-	-	-	6 ～ 16	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	6 ～ 12	-	-	-	10 ～ 119	7 ～ 17	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	-	10 ～ 14	-	-	10 ～ 119	7 ～ 17	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	-	-	-	-	10 ～ 133	7 ～ 19	-	-	-	6 ～ 16	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	6 ～ 16	-	-	-	10 ～ 133	7 ～ 19	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1190	f8	No Induction Hardening	6 ～ 80	-	10 ～ 18	-	-	10 ～ 133	7 ～ 19	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	25	25 ～ 1190	f8	No Induction Hardening	8 ～ 100	-	-	-	-	10 ～ 168	9 ～ 24	-	-	-	8 ～ 20	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	25	25 ～ 1190	f8	No Induction Hardening	8 ～ 100	8 ～ 20	-	-	-	10 ～ 168	9 ～ 24	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	25	25 ～ 1190	f8	No Induction Hardening	8 ～ 100	-	10 ～ 18	-	-	10 ～ 168	9 ～ 24	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	30	25 ～ 1490	f8	No Induction Hardening	8 ～ 120	-	-	-	-	10 ～ 203	9 ～ 29	-	-	-	8 ～ 24	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	30	25 ～ 1490	f8	No Induction Hardening	8 ～ 120	8 ～ 25	-	-	-	10 ～ 203	9 ～ 29	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	30	25 ～ 1490	f8	No Induction Hardening	8 ～ 120	-	10 ～ 18	-	-	10 ～ 203	9 ～ 29	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	35	25 ～ 1480	f8	No Induction Hardening	10 ～ 210	-	-	-	-	20 ～ 238	11 ～ 34	-	-	-	10 ～ 30	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	35	25 ～ 1480	f8	No Induction Hardening	10 ～ 210	10 ～ 30	-	-	-	20 ～ 238	11 ～ 34	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	35	25 ～ 1480	f8	No Induction Hardening	10 ～ 210	-	10 ～ 18	-	-	20 ～ 238	11 ～ 34	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	40	25 ～ 1480	f8	No Induction Hardening	12 ～ 210	-	-	-	-	20 ～ 273	13 ～ 39	-	-	-	12 ～ 30	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	40	25 ～ 1480	f8	No Induction Hardening	12 ～ 210	12 ～ 30	-	-	-	20 ～ 273	13 ～ 39	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	40	25 ～ 1480	f8	No Induction Hardening	12 ～ 210	-	12 ～ 18	-	-	20 ～ 273	13 ～ 39	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	50	25 ～ 1480	f8	No Induction Hardening	16 ～ 210	-	-	-	-	20 ～ 343	17 ～ 49	-	-	-	16 ～ 30	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	50	25 ～ 1480	f8	No Induction Hardening	16 ～ 210	15 ～ 30	-	-	-	20 ～ 343	17 ～ 49	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	One End Stepped	No Machining	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	50	25 ～ 1480	f8	No Induction Hardening	16 ～ 210	-	14 ～ 18	-	-	20 ～ 343	17 ～ 49	-	-	-	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 780	f8	No Induction Hardening	6 ～ 30	-	-	-	-	10 ～ 42	7	7	6 ～ 30	10 ～ 42	6	6
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 780	f8	No Induction Hardening	6 ～ 30	-	-	6	-	10 ～ 42	7	7	6 ～ 30	10 ～ 42	6	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 780	f8	No Induction Hardening	6 ～ 30	6	-	-	-	10 ～ 42	7	7	6 ～ 30	10 ～ 42	-	6
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 780	f8	No Induction Hardening	6 ～ 30	6	-	6	-	10 ～ 42	7	7	6 ～ 30	10 ～ 42	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 780	f8	No Induction Hardening	6 ～ 40	-	-	-	-	10 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	10 ～ 63	6 ～ 8	6 ～ 8
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 780	f8	No Induction Hardening	6 ～ 40	-	-	6 ～ 8	-	10 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	10 ～ 63	6 ～ 8	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 780	f8	No Induction Hardening	6 ～ 40	6 ～ 8	-	-	-	10 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	10 ～ 63	-	6 ～ 8
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 780	f8	No Induction Hardening	6 ～ 40	6 ～ 8	-	6 ～ 8	-	10 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	10 ～ 63	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	-	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	6 ～ 10	6 ～ 10
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	6 ～ 10	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	-	10	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	6 ～ 10
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	6 ～ 10	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	10	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	10	-	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	6 ～ 10
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	10	6 ～ 10	-	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	10	-	10	10 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	10 ～ 77	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	-	-	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	6 ～ 10	6 ～ 10
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	6 ～ 10	-	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	-	-	-	10	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	6 ～ 10	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	-	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	-	6 ～ 10
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	6 ～ 10	-	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	-	-
-	1 Piece(s)	11 Day(s)	10	Both Ends Stepped	Threaded	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 980	f8	No Induction Hardening	6 ～ 50	6 ～ 10	-	-	10	10 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	10 ～ 84	-	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

End Shape (Left)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

288 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- One End Stepped
- Both Ends Stepped
Clear
End Shape (Right)
- No Machining
- Threaded
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
B(mm)
[6-210/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[10-343/1mm Unit(s)]
Clear
P(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
Q(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
S(mm)
[6-210/1mm Unit(s)]
Clear
T(mm)
[10-343/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSFAF
- PSFAX
- PSFGF
- PSFGX
- PSFUF
- PSFUX
- PSSFAF
- PSSFAX
- PSSFGF
- PSSFGX
- PSSFUF
- PSSFUX
- RSFAF
- RSFAX
- SFAF
- SFAX
- SFUF
- SFUX
- SSFAF
- SSFAX
- SSFUF
- SSFUX
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less

11 Day(s) or Less

15 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Basic Shape

End Shape (Right)

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

B(mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

Shaft Fit Tolerance

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB