(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole (Part Numbers)

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a male thread on one end, a drilled hole type, and a spanner groove type. L size standard expanded! You can now purchase from an even more complete lineup.

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SFASSFUS-SFHN-SUJ2 EquivalentEffective Hardened
Depth of Induction Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSFASSSFUS-SSFHN-SUS440C or 13Cr stainless
PSFASPSFUS-PSFHN-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFASPSSFUS-PSSFHN-SUS440C or 13Cr stainless
RSFAS--RSFHN-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGS-PSGHNS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGS--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm).>> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-B-P-SC-H
SFAS12-200-F20-B15-P8-SC5  
SFHN18-450-F40-B25-P12  -H10

Part Number1mm IncrementP SelectionWrench Flats DimensionsD Tol.(Y)Max.RC
TypeDLFBSCW1g6h5f8
(With Wrench Flats)

(D Tol. g6)
SFAS
SSFAS

PSFAS
PSSFAS


(D Tol. f8)
PSFGS
PSSFGS



(D Tol. h5)
SFUS

SSFUS
PSFUS
PSSFUS




625~7982≤F≤Px5(When P≤6)
B≤F-2

(when P=8 or 10) B≤F-3

(When P≥12)
B≤F-5

(W/o Threads)
B=0

[ ! ]B≥Pitchx3
345        SC = 1mm Increment
[ ! ]SC+1≤L
[ ! ]SC≥0

[ ! ]For Details of Wrench Flats, see P.142
58-0.004
-0.012
0
-0.005
-0.010
-0.028
6000.3 or Less0.5 or Less
825~9983456       78-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~998 4568      88-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1225~1198  56810     1010-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~1198  5681012    1110-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~1198  5681012    1310-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~1198  5681012    1410-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~1198  568101216   1610-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~1198   68101216   1710-0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~1198    81012162024 2210-0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~1498    81012162024 2715-0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~1498     1012162024303015-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
4025~1498      12162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~1498       162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less

Part Number1mm IncrementP SelectionCross-Drilled Hole DimensionsD Tol.(Y)Max.RC
TypeDLFBHdg6f8
(With Cross-Drilled Hole)
(D Tol. g6)
SFHN
SSF
HN
PSFHN
PSSFHN
RSFH
N

(D Tol. f8)
PSGHN
[ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
825~5002≤F≤Px5(When P≤6)
B≤F-2

(when P=8 or 10) B≤F-3

(When P≥12)
B≤F-5

(W/o Threads)
B=0

[ ! ]B≥Pitchx3
3456      H = 1mm Increment
[ ! ]L≥H+d/2+2
[ ! ]H≥d/2+2
3-0.005
-0.014
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~500 4568     3-0.005
-0.014
-0.013
-0.035
8000.3 or Less0.3 or Less
1225~500  56810    3-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.3 or Less
1325~500  5681012   4-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.3 or Less
1525~500  5681012   4-0.006
-0.017
-0.016
-0.043
10000.3 or Less0.3 or Less
1625~500  5681012   4-0.006
-0.017
-0.016
-0.043
12000.3 or Less0.3 or Less
1825~500  568101216  6-0.006
-0.017
-0.016
-0.043
12000.3 or Less0.3 or Less
2025~500   68101216  6-0.007
-0.020
-0.020
-0.053
12000.3 or Less1.0 or Less
2525~500    810121620247-0.007
-0.020
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~500    810121620247-0.007
-0.020
-0.020
-0.053
15000.3 or Less1.0 or Less

Part Number1mm IncrementP SelectionWrench Flats DimensionsD Tol.(Y)Max.RC
TypeDLFBSCW1g6
(With Wrench Flats)

(D Tol. g6)
Low Temp. Black Chrome Plating
RSFAS
625~5002≤F≤Px5(When P≤6)
B≤F-2

(when P=8 or 10) B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3
345       SC = 1mm Increment
[ ! ]SC+1≤L
[ ! ]SC≥0

[ ! ]For Details of Wrench Flats, see P.142
58-0.004
-0.012
6000.3 or Less0.5 or Less
825~5003456      78-0.005
-0.014
8000.3 or Less0.5 or Less
1025~500 4568     88-0.005
-0.014
8000.3 or Less0.5 or Less
1225~500  56810    1010-0.006
-0.017
10000.3 or Less0.5 or Less
1325~500  5681012   1110-0.006
-0.017
10000.3 or Less0.5 or Less
1525~500  5681012   1310-0.006
-0.017
10000.3 or Less0.5 or Less
1625~500  5681012   1410-0.006
-0.017
12000.3 or Less0.5 or Less
1825~500  568101216  1610-0.006
-0.017
12000.3 or Less0.5 or Less
2025~500   68101216  1710-0.007
-0.020
12000.3 or Less1.0 or Less
2525~500    810121620242210-0.007
-0.020
12000.3 or Less1.0 or Less
3025~500    810121620242715-0.007
-0.020
15000.3 or Less1.0 or Less

Coarse Thread Dimension
Mpitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
RSFAS8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,​4,​5,​6,​8]-SC[0-498/1]
RSFAS8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,​4,​5,​6,​8]-SC[0-498/1]
RSFAS10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,​5,​6,​8,​10]-SC[0-498/1]
RSFAS10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,​5,​6,​8,​10]-SC[0-498/1]
RSFAS10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10-SC[0-498/1]
RSFAS12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,​6,​8,​10,​12]-SC[0-498/1]
RSFAS12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,​6,​8,​10,​12]-SC[0-498/1]
RSFAS12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,​12]-SC[0-498/1]
RSFAS13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,​6,​8,​10,​12]-SC[0-498/1]
RSFAS13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,​6,​8,​10,​12]-SC[0-498/1]
RSFAS13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,​12]-SC[0-498/1]
RSFAS15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,​6,​8,​10,​12]-SC[0-498/1]
RSFAS15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,​6,​8,​10,​12,​15]-SC[0-498/1]
RSFAS15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,​12,​14]-SC[0-498/1]
RSFAS16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,​6,​8,​10,​12,​16]-SC[0-498/1]
RSFAS16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,​6,​8,​10,​12,​15]-SC[0-498/1]
RSFAS16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,​12,​14]-SC[0-498/1]
RSFAS18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,​6,​8,​10,​12,​16]-SC[0-498/1]
RSFAS18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,​6,​8,​10,​12,​15,​17]-SC[0-498/1]
RSFAS18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,​12,​14,​18]-SC[0-498/1]
RSFAS20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,​8,​10,​12,​16,​20]-SC[0-498/1]
RSFAS20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,​8,​10,​12,​15,​17]-SC[0-498/1]
RSFAS20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMS[10,​12,​14,​18]-SC[0-498/1]
RSFAS25-[25-500/1]-F[2-120/1]-B[2-120/1]-P[8,​10,​12,​16,​20,​24]-SC[0-498/1]
RSFAS25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMC[8,​10,​12,​15,​17,​20]-SC[0-498/1]
RSFAS25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMS[10,​12,​14,​18]-SC[0-498/1]
RSFAS30-[25-500/1]-F[2-150/1]-B[2-150/1]-P[8,​10,​12,​16,​20,​24]-SC[0-498/1]
RSFAS30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMC[8,​10,​12,​15,​17,​20,​25,​30]-SC[0-498/1]
RSFAS30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMS[10,​12,​14,​18]-SC[0-498/1]
RSFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6,​8]-H[0-496/1]
RSFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-PMC[3,​4,​5,​6,​8]-H[0-496/1]
RSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,​5,​6,​8,​10]-H[0-496/1]
RSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,​5,​6,​8,​10]-H[0-496/1]
RSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-H[0-496/1]
RSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,​6,​8,​10,​12]-H[0-496/1]
RSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,​6,​8,​10,​12]-H[0-496/1]
RSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,​12]-H[0-496/1]
RSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,​6,​8,​10,​12]-H[0-496/1]
RSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,​6,​8,​10,​12]-H[0-496/1]
RSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,​12]-H[0-496/1]
RSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,​6,​8,​10,​12]-H[0-496/1]
RSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,​6,​8,​10,​12,​15]-H[0-496/1]
RSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,​12,​14]-H[0-496/1]
RSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,​6,​8,​10,​12,​16]-H[0-496/1]
RSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,​6,​8,​10,​12,​15]-H[0-496/1]
RSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,​12,​14]-H[0-496/1]
RSFHN18-[25-500/1]-F[2-80/1]-B[2-78/1]-P[5,​6,​8,​10,​12,​16]-H[0-495/1]
RSFHN18-[25-500/1]-F[2-80/1]-B[2-78/1]-PMC[5,​6,​8,​10,​12,​15,​17]-H[0-495/1]
RSFHN18-[25-500/1]-F[2-80/1]-B[2-78/1]-PMS[10,​12,​14,​18]-H[0-495/1]
RSFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-P[6,​8,​10,​12,​16,​20]-H[0-495/1]
RSFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-PMC[6,​8,​10,​12,​15,​17]-H[0-495/1]
RSFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-PMS[10,​12,​14,​18]-H[0-495/1]
RSFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-P[8,​10,​12,​16,​20,​24]-H[0-494/1]
RSFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-PMC[8,​10,​12,​15,​17,​20]-H[0-494/1]
RSFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-PMS[10,​12,​14,​18]-H[0-494/1]
RSFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-P[8,​10,​12,​16,​20,​24]-H[0-494/1]
RSFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-PMC[8,​10,​12,​15,​17,​20,​25,​30]-H[0-494/1]
RSFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-PMS[10,​12,​14,​18]-H[0-494/1]
SFAS6-[25-598/1]-F[2-42/1]-B[2-42/1]-P[3,​4,​5,​6]-SC[0-592/1]
SFAS6-[25-598/1]-F[2-42/1]-B[2-42/1]-PMC[3,​4,​5,​6]-SC[0-592/1]
SFAS8-[25-798/1]-F[2-56/1]-B[2-55/1]-P[3,​4,​5,​6,​8]-SC[0-592/1]
SFAS8-[25-798/1]-F[2-56/1]-B[2-55/1]-PMC[3,​4,​5,​6,​8]-SC[0-592/1]
SFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-P[4,​5,​6,​8,​10]-SC[0-792/1]
SFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMC[4,​5,​6,​8,​10]-SC[0-792/1]
SFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMS10-SC[0-792/1]
SFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]-SC[0-990/1]
SFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12]-SC[0-990/1]
SFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]-SC[0-990/1]
SFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-P[5,​6,​8,​10,​12]-SC[0-990/1]
SFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-PMC[5,​6,​8,​10,​12]-SC[0-990/1]
SFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-PMS[10,​12]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12,​15]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12,​14]-SC[0-990/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15]-SC[0-1190/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,​12,​14]-SC[0-1190/1]
SFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,​6,​8,​10,​12,​16]-SC[0-1190/1]
SFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15,​17]-SC[0-1190/1]
SFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,​12,​14,​18]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-P[6,​8,​10,​12,​16,​20]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMC[6,​8,​10,​12,​15,​17,​20]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMS[10,​12,​14,​18]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-P[8,​10,​12,​16,​20,​24]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMS[10,​12,​14,​18]-SC[0-1190/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,​10,​12,​16,​20,​24]-SC[0-1485/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,​10,​12,​15,​17,​20,​25,​30]-SC[0-1485/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,​12,​14,​18]-SC[0-1485/1]
SFAS35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,​12,​16,​20,​24,​30]-SC[0-1485/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
B
(mm)
F
(mm)
H
(mm)
PMC
(mm)
PMS
(mm)
Threaded [P]
(mm)

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 402 ~ 40---3 ~ 8

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 402 ~ 40-3 ~ 8--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 502 ~ 50---4 ~ 10

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 502 ~ 50-4 ~ 10--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 502 ~ 50--10-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60---5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60-5 ~ 12--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60--10 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60---5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60-5 ~ 12--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60--10 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60---5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60-5 ~ 15--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 602 ~ 60--10 ~ 14-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80---5 ~ 16

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80-5 ~ 15--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80--10 ~ 14-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80---5 ~ 16

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80-5 ~ 17--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 802 ~ 80--10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1002 ~ 100---6 ~ 20

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1002 ~ 100-6 ~ 17--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1002 ~ 100--10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1202 ~ 120---8 ~ 24

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1202 ~ 120-8 ~ 20--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1202 ~ 120--10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1502 ~ 150---8 ~ 24

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1502 ~ 150-8 ~ 30--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)0 ~ 4982 ~ 1502 ~ 150--10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)-2 ~ 282 ~ 300 ~ 496--3 ~ 8

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)-2 ~ 282 ~ 300 ~ 4963 ~ 8--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 382 ~ 400 ~ 496--4 ~ 10

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 382 ~ 400 ~ 4964 ~ 10--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 382 ~ 400 ~ 496-10-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-2 ~ 482 ~ 500 ~ 496--5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-2 ~ 482 ~ 500 ~ 4965 ~ 12--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-2 ~ 482 ~ 500 ~ 496-10 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496--5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 4965 ~ 12--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496-10 ~ 12-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496--5 ~ 12

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 4965 ~ 15--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496-10 ~ 14-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496--5 ~ 16

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 4965 ~ 15--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)-2 ~ 582 ~ 600 ~ 496-10 ~ 14-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 495--5 ~ 16

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 4955 ~ 17--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating1825 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 495-10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 495--6 ~ 20

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 4956 ~ 17--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 782 ~ 800 ~ 495-10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 494--8 ~ 24

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 4948 ~ 20--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating2525 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 494-10 ~ 18-

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 494--8 ~ 24

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 4948 ~ 30--

-

1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedLow Temperature Black Chrome Plating3025 ~ 500g6Induction Hardened (58HRC~)-2 ~ 1172 ~ 1200 ~ 494-10 ~ 18-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided625 ~ 598g6Induction Hardened (58HRC~)0 ~ 5920 ~ 422 ~ 42---3 ~ 6

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided625 ~ 598g6Induction Hardened (58HRC~)0 ~ 5920 ~ 422 ~ 42-3 ~ 6--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided825 ~ 798g6Induction Hardened (58HRC~)0 ~ 5920 ~ 552 ~ 56---3 ~ 8

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided825 ~ 798g6Induction Hardened (58HRC~)0 ~ 5920 ~ 552 ~ 56-3 ~ 8--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 798g6Induction Hardened (58HRC~)0 ~ 7920 ~ 702 ~ 70---4 ~ 10

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 798g6Induction Hardened (58HRC~)0 ~ 7920 ~ 702 ~ 70-4 ~ 10--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ~ 798g6Induction Hardened (58HRC~)0 ~ 7920 ~ 702 ~ 70--10-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84---5 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84-5 ~ 12--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84--10 ~ 12-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 792 ~ 84---5 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 792 ~ 84-5 ~ 12--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 792 ~ 84--10 ~ 12-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84---5 ~ 12

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84-5 ~ 15--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ~ 998g6Induction Hardened (58HRC~)0 ~ 9900 ~ 842 ~ 84--10 ~ 14-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1072 ~ 112---5 ~ 16

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1072 ~ 112-5 ~ 15--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1072 ~ 112--10 ~ 14-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11902 ~ 1072 ~ 112---5 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11902 ~ 1072 ~ 112-5 ~ 17--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11902 ~ 1072 ~ 112--10 ~ 18-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1352 ~ 140---6 ~ 20

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1352 ~ 140-6 ~ 20--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1352 ~ 140--10 ~ 18-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1632 ~ 120---8 ~ 24

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1632 ~ 120-8 ~ 25--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ~ 1198g6Induction Hardened (58HRC~)0 ~ 11900 ~ 1632 ~ 120--10 ~ 18-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)0 ~ 14850 ~ 2052 ~ 210---8 ~ 24

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)0 ~ 14850 ~ 2052 ~ 210-8 ~ 30--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ~ 1498g6Induction Hardened (58HRC~)0 ~ 14850 ~ 2052 ~ 210--10 ~ 18-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ~ 1498g6Induction Hardened (58HRC~)0 ~ 14852 ~ 2052 ~ 210---10 ~ 30

Loading...

 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)