(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 15/12/2024 sampai dengan 5:00 pada tanggal 16/12/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (WIB) 16/12/2024. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole (Part Numbers)

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SAFUSFFU-SFHAM-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >>P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSAFUSSFFU-SSHAM-SUS440C or 13Cr stainless
PSAFUPSFFU-PSHAM-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFUPSSFFU-PSSHAM-SUS440C or 13Cr stainless
RSAFU--RSHAM-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSAGU-PSHGMS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSAGU--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-M-T-N-SC-H
SAFU15
SFHAM15
-
-
300
300
-
-
F18
F18
-
-
M6
M6
-
-
T17
T17
-
-
N12
N12
-

SC8


-

H8

Part Number1mm IncrementsSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)SCW1g6h5f8
 825~ 990





5≤F≤Mx3
5≤T≤Nx3





[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
6       SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
78-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
(With Wrench Flats)

(D Tol. g6)
SAFU
SSAFU

PSAFU
PSSAFU


(D Tol. f8)
PSAGU
PSSAGU


(D Tol. h5) SFFU
SSFFU
PSFFU
PSSFFU
1025~ 99068      88-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
1225~11906810     1010-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1325~1190681012    1110-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1525~1190681012    1310-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1625~1190681012    1410-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
1825~119068101216   1610-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
2025~119068101216   1710-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
2525~1190 81012162024 2210-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
3025~1490 81012162024 2715-0.007
-0.020
0
-0.009
-0.020
-0.053
15001.0 or Less
3525~1490  1012162024303015-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
4025~1490   12162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
5025~1490    162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less

Part Number1mm IncrementsSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)SCW1g6
 825~500



5≤F≤Mx3
5≤T≤Nx3



[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
6      SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
78-0.005
-0.014
8000.5 or Less
(With Wrench Flats)

(D Tol. g6)
Low Temp. Black Chrome Plating
RSAFU
(Ymax≤800)
1025~50068     88-0.005
-0.014
8000.5 or Less
1225~5006810    1010-0.006
-0.017
10000.5 or Less
1325~500681012   1110-0.006
-0.017
10000.5 or Less
1525~500681012   1310-0.006
-0.017
10000.5 or Less
1625~500681012   1410-0.006
-0.017
12000.5 or Less
1825~50068101216  1610-0.006
-0.017
12000.5 or Less
2025~50068101216  1710-0.007
-0.020
12001.0 or Less
2525~500 810121620242210-0.007
-0.020
12001.0 or Less
3025~500 810121620242715-0.007
-0.020
15001.0 or Less

Part Number1mm IncrementsSelectionCross-Drilled Hole DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)Hdg6f8
(With Cross-Drilled Hole)
(D Tol. g6)
SFHAM
SSHAM
P
SHAM
PSSHAM
RSHAM

(D Tol. f8)
PSHGM
[ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
1025~500





5≤F≤Mx3
5≤T≤Nx3





[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
68     H=1mm Increment

[ ! ]L≥H+d/2+2
[ ! ]H≥d/2+2
3-0.005
-0.014
-0.013
-0.035
8000.5 or Less
1225~5006810    3-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1325~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1525~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1625~500681012   4-0.006
-0.017
-0.016
-0.043
12000.5 or Less
1825~50068101216  6-0.006
-0.017
-0.016
-0.043
12000.5 or Less
2025~50068101216  6-0.007
-0.020
-0.020
-0.053
12001.0 or Less
2525~500 810121620247-0.007
-0.020
-0.020
-0.053
12001.0 or Less
3025~500 810121620247-0.007
-0.020
-0.020
-0.053
15001.0 or Less

Coarse Thread Undercut Dimensions
M
N
PitchMC
NC
(g)
61.04.42
81.256.03
101.57.73
121.759.44
162.013.04
202.516.45
243.019.65
303.525.05

Alterations

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFFU20-[25-1390/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMC[6,​8,​10,​12,​15,​17]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-NMC[6,​8,​10,​12,​15,​17]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMS[10,​12,​14,​18]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMS[10,​12,​14,​18]-T[5-48/1]-NMC[6,​8,​10,​12,​15,​17]-SC[0-1180/1]
PSFFU20-[25-1390/1]-F[5-48/1]-MMS[10,​12,​14,​18]-T[5-48/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20]-SC[0-1180/1]
PSFFU25-[25-1390/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSFFU30-[25-1490/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20,​25]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-M[8,​10,​12,​16,​20,​24]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20,​25]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20,​25]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20,​25]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMC[8,​10,​12,​15,​17,​20,​25]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-N[8,​10,​12,​16,​20,​24]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-NMC[8,​10,​12,​15,​17,​20,​25]-SC[0-1475/1]
PSFFU30-[25-1490/1]-F[5-72/1]-MMS[10,​12,​14,​18]-T[5-72/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-M[10,​12,​16,​20,​24,​30]-T[5-90/1]-N[10,​12,​16,​20,​24,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-M[10,​12,​16,​20,​24,​30]-T[5-90/1]-NMC[10,​12,​15,​17,​20,​25,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-M[10,​12,​16,​20,​24,​30]-T[5-90/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMC[10,​12,​15,​17,​20,​25,​30]-T[5-90/1]-N[10,​12,​16,​20,​24,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMC[10,​12,​15,​17,​20,​25,​30]-T[5-90/1]-NMC[10,​12,​15,​17,​20,​25,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMC[10,​12,​15,​17,​20,​25,​30]-T[5-90/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMS[10,​12,​14,​18]-T[5-90/1]-N[10,​12,​16,​20,​24,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMS[10,​12,​14,​18]-T[5-90/1]-NMC[10,​12,​15,​17,​20,​25,​30]-SC[0-1475/1]
PSFFU35-[25-1490/1]-F[5-90/1]-MMS[10,​12,​14,​18]-T[5-90/1]-NMS[10,​12,​14,​18]-SC[0-1475/1]
PSFFU40-[25-1490/1]-F[5-90/1]-M[12,​16,​20,​24,​30]-T[5-90/1]-N[12,​16,​20,​24,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-M[12,​16,​20,​24,​30]-T[5-90/1]-NMC[12,​15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-M[12,​16,​20,​24,​30]-T[5-90/1]-NMS[12,​14,​18]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMC[12,​15,​17,​20,​25,​30]-T[5-90/1]-N[12,​16,​20,​24,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMC[12,​15,​17,​20,​25,​30]-T[5-90/1]-NMC[12,​15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMC[12,​15,​17,​20,​25,​30]-T[5-90/1]-NMS[12,​14,​18]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMS[12,​14,​18]-T[5-90/1]-N[12,​16,​20,​24,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMS[12,​14,​18]-T[5-90/1]-NMC[12,​15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU40-[25-1490/1]-F[5-90/1]-MMS[12,​14,​18]-T[5-90/1]-NMS[12,​14,​18]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-M[16,​20,​24,​30]-T[5-90/1]-N[16,​20,​24,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-M[16,​20,​24,​30]-T[5-90/1]-NMC[15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-M[16,​20,​24,​30]-T[5-90/1]-NMS[14,​18]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMC[15,​17,​20,​25,​30]-T[5-90/1]-N[16,​20,​24,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMC[15,​17,​20,​25,​30]-T[5-90/1]-NMC[15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMC[15,​17,​20,​25,​30]-T[5-90/1]-NMS[14,​18]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMS[14,​18]-T[5-90/1]-N[16,​20,​24,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMS[14,​18]-T[5-90/1]-NMC[15,​17,​20,​25,​30]-SC[0-1470/1]
PSFFU50-[25-1490/1]-F[5-90/1]-MMS[14,​18]-T[5-90/1]-NMS[14,​18]-SC[0-1470/1]
PSHAM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-N6-H[0-496/1]
PSHAM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-H[0-496/1]
PSHAM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-H[0-496/1]
PSHAM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-H[0-496/1]
PSHAM10-[25-500/1]-F[5-24/1]-M[6,​8]-T[5-24/1]-N[6,​8]-H[0-496/1]
PSHAM10-[25-500/1]-F[5-24/1]-M[6,​8]-T[5-24/1]-NMC[6,​8]-H[0-496/1]
PSHAM10-[25-500/1]-F[5-24/1]-MMC[6,​8]-T[5-24/1]-N[6,​8]-H[0-496/1]
PSHAM10-[25-500/1]-F[5-24/1]-MMC[6,​8]-T[5-24/1]-NMC[6,​8]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-M[6,​10,​500]-T[5-500/1]-N[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-M[6,​10,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-M[6,​10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-N[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-N[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM12-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMC[6,​10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMC[6,​10,​500]-H[0-496/1]
PSHAM13-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-NMC[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMC[6,​10,​12,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMC[6,​10,​12,​500]-T[5-500/1]-NMC[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMC[6,​10,​12,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMC[6,​10,​12,​500]-H[0-496/1]
PSHAM15-[25-500/1]-F[5-500/1]-MMS[10,​500]-T[5-500/1]-NMS[10,​500]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-M[6,​10,​12,​500]-T[5-500/1]-N[6,​10,​12,​500]-H[0-496/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Thread M to Fine One [MMC]
(mm)
Change Thread M to Fine One [MMS]
(mm)
Change Thread N to Fine One [NMC]
(mm)
Change Thread N to Fine One [NMS]
(mm)
F
(mm)
H
(mm)
T
(mm)
Threaded (Coarse) [M]
(mm)
Threaded (Coarse) [N]
(mm)

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180----5 ~ 48-5 ~ 48-6 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180--6 ~ 17-5 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180---10 ~ 185 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11806 ~ 17---5 ~ 48-5 ~ 48-6 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11806 ~ 17-6 ~ 17-5 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11806 ~ 17--10 ~ 185 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 18--5 ~ 48-5 ~ 48-6 ~ 16

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 186 ~ 17-5 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 18-10 ~ 185 ~ 48-5 ~ 48--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180----5 ~ 72-5 ~ 728 ~ 248 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180--8 ~ 20-5 ~ 72-5 ~ 728 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180---10 ~ 185 ~ 72-5 ~ 728 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11808 ~ 20---5 ~ 72-5 ~ 72-8 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11808 ~ 20-8 ~ 20-5 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 11808 ~ 20--10 ~ 185 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 18--5 ~ 72-5 ~ 72-8 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 188 ~ 20-5 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1390h5Induction Hardened (58HRC~)0 ~ 1180-10 ~ 18-10 ~ 185 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475----5 ~ 72-5 ~ 728 ~ 248 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475--8 ~ 25-5 ~ 72-5 ~ 728 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475---10 ~ 185 ~ 72-5 ~ 728 ~ 24-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 14758 ~ 25---5 ~ 72-5 ~ 72-8 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 14758 ~ 25-8 ~ 25-5 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 14758 ~ 25--10 ~ 185 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 18--5 ~ 72-5 ~ 72-8 ~ 24

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 188 ~ 25-5 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 18-10 ~ 185 ~ 72-5 ~ 72--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475----5 ~ 90-5 ~ 9010 ~ 3010 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475--10 ~ 30-5 ~ 90-5 ~ 9010 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475---10 ~ 185 ~ 90-5 ~ 9010 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147510 ~ 30---5 ~ 90-5 ~ 90-10 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147510 ~ 30-10 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147510 ~ 30--10 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 18--5 ~ 90-5 ~ 90-10 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 1810 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1475-10 ~ 18-10 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470----5 ~ 90-5 ~ 9012 ~ 3012 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470--12 ~ 30-5 ~ 90-5 ~ 9012 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470---12 ~ 185 ~ 90-5 ~ 9012 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147012 ~ 30---5 ~ 90-5 ~ 90-12 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147012 ~ 30-12 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147012 ~ 30--12 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-12 ~ 18--5 ~ 90-5 ~ 90-12 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-12 ~ 1812 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-12 ~ 18-12 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470----5 ~ 90-5 ~ 9016 ~ 3016 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470--15 ~ 30-5 ~ 90-5 ~ 9016 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470---14 ~ 185 ~ 90-5 ~ 9016 ~ 30-

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147015 ~ 30---5 ~ 90-5 ~ 90-16 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147015 ~ 30-15 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 147015 ~ 30--14 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-14 ~ 18--5 ~ 90-5 ~ 90-16 ~ 30

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-14 ~ 1815 ~ 30-5 ~ 90-5 ~ 90--

-

1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1490h5Induction Hardened (58HRC~)0 ~ 1470-14 ~ 18-14 ~ 185 ~ 90-5 ~ 90--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 180 ~ 4965 ~ 1866

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)---6-5 ~ 180 ~ 4965 ~ 186-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)-6---5 ~ 180 ~ 4965 ~ 18-6

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 500g6Induction Hardened (58HRC~)-6-6-5 ~ 180 ~ 4965 ~ 18--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 240 ~ 4965 ~ 246 ~ 86 ~ 8

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)---6 ~ 8-5 ~ 240 ~ 4965 ~ 246 ~ 8-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-6 ~ 8---5 ~ 240 ~ 4965 ~ 24-6 ~ 8

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 500g6Induction Hardened (58HRC~)-6 ~ 8-6 ~ 8-5 ~ 240 ~ 4965 ~ 24--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 5000 ~ 4965 ~ 5006 ~ 5006 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)---6 ~ 500-5 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)----10 ~ 5005 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500---5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500-6 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500--10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500--5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)--10 ~ 5006 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500-10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 5000 ~ 4965 ~ 5006 ~ 5006 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)---6 ~ 500-5 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)----10 ~ 5005 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500---5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500-6 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500--10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500--5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)--10 ~ 5006 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500-10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 5000 ~ 4965 ~ 5006 ~ 5006 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)---6 ~ 500-5 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)----10 ~ 5005 ~ 5000 ~ 4965 ~ 5006 ~ 500-

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500---5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500-6 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-6 ~ 500--10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500--5 ~ 5000 ~ 4965 ~ 500-6 ~ 500

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)--10 ~ 5006 ~ 500-5 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)--10 ~ 500-10 ~ 5005 ~ 5000 ~ 4965 ~ 500--

-

1 Piece(s) 11 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 500g6Induction Hardened (58HRC~)-----5 ~ 5000 ~ 4965 ~ 5006 ~ 5006 ~ 500

Loading...

Example

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image
 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) Threaded
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)